Rated 3.9 out of 5 by 445
Rated 4.0 out of 5.0 by Jimsan Looks Great
Cordovan Brown tint, transparent stain. Easy to brush on, but very "watery" as it runs and drips very easily. After brushing to even out, it dried with a consistent color. Does not cover a great amount of fence, two gallons used on 40 linear feet x 6 foot high cedar fence and gate (both sides) ..
October 4, 2016
Rated 5.0 out of 5.0 by bette Behr The Best
I Power washed and my daughter and I weatherproofed my front porch,It is absolutely beautiful.Goes on nice,covers well and drys quickly..Used 2 gallon and the porch is about 34 Ft long x 8 ft wide. I used Behr Natural 500 Weatherproofing wood finish.
This porch was build in 2007.Looks like it was just built.
September 13, 2016
Rated 5.0 out of 5.0 by Ometto It wasn't a bear putting on this Behr product!
This Behr deck weatherproofing transparent wood finish went on easily. I used a paint pad for the top of the deck and a small brush to get in between the boards for a bit more protection. It was smooth, dried within a few hours, so that I was able to give it an additional coat the next day. It's supposed to last up to 4 years with a second coat on it. It looks great!
September 21, 2016
Rated 5.0 out of 5.0 by Edward4319 Good stain!
This stain flowed very well through the paint sprayer.
September 20, 2016
Rated 4.0 out of 5.0 by RenovatedHaven Cover Bare Wood With This Behr
Built a small deck for our back door with pressure treated pine. I let the wood dry out for a few months and then it was time to stain. After some research I decided on this product. I prepped the wood with Behr All in One Cleaner, power washed, and light sanding to knock down any splinters from power washing. Here are some pros and cons from my experience:
*Product works well - water beads up on surface
*Very please with the color
*Clean up was easy - water base
*Penetrates the wood
*Can be difficult to apply - I am very meticulous and want my finish to be completely uniform. This product behaves like a paint in that if you are not careful your brush strokes will show but it also behaves like a stain in that it will leave lap marks if you paint over an area that has already been painted.
Despite these drawbacks I was still able to get a finish that I am very pleased with. A couple of pointers:
*Do not skip the prep work - make sure the wood is ready for stain (read the instructions)
*Paint with the grain (this is not a wipe on wipe off stain-you paint it on and leave it) and complete your strokes.
*Keep a wet edge and complete one whole board at a time. If you apply product to only part of the piece and then come back to finish it there will be lap marks - the part you did previously will be darker.
*Do more than one coat (I did two with one gallon)
August 10, 2016
Rated 5.0 out of 5.0 by Sailndayz Going on three years on our fence and holding up nicely. While this stuff, despite being "Natural" and "Transparent" does have a slight tint. But it is very agreeable. It actually improves the natural look of our wood! We've used it on two fences now. The first, the developer put in some cheap crud, allegedly redwood. It was warped, splitting and crummy looking for Redwoodwod. After forcing the developer to replace about 12 boards, we declared victory. Instructions recommend brushing this on. Used the 5" brushes. Came out looking terrific. Hired Fence company for new Redwood fence on another property. A better grade of wood, came out beautiful. Brushing, plan. one Gal. Each 16 feet. But We put it on heavy
October 25, 2016
Rated 5.0 out of 5.0 by chuck37 Easy to apply, great color
The rich red color looks so great on my fence with my holly trees in front of it with their bright green leaves.
July 26, 2016
Rated 5.0 out of 5.0 by Shawn Shows natural colors in wood
I really love how this transparent finish allows you to see the original colors and variation in the wood. I did not want a solid deck stain and this worked great. Keeps the water off and has done a great job protecting our deck.
June 14, 2016