BEHR Premium

Model 87501

Internet #203938579

1-gal. #875 White Basement and Masonry Waterproofer

$27.98 /each

Frequently Bought Together

Product Overview

The BEHR Premium Basement and Masonry Waterproofer with NanoGuard Technology is an interior/exterior waterproofer with a 10 year customer satisfaction guarantee. It is designed for porous masonry surfaces and withstands up to 12 PSI of hydrostatic pressure and 98 mph wind-driven rain. This low odor, mildew resistant waterproofer provides a smooth, decorate finish that is sprayable for easy application. Ideal for use on above and below grade walls, retaining walls, garage walls, masonry walls, cinder blocks, stucco, brick, foundations and landscape walls.

California residents: see   Proposition 65 information

  • Ideal for interior and exterior vertical concrete and masonry walls
  • 10 year customer satisfaction guarantee
  • Mildew resistant finish
  • Withstands 12 PSI of hydrostatic pressure and 98 mph wind-driven rain
  • 100% Styrene Acrylic
  • Available in custom colors
  • Durable Flat finish
  • 75 - 125 sq. ft. of coverage per-gal.
  • Sprayable, saves application time
  • Easy clean-up with soap and water
  • Online Price includes Paint Care fee in the following states: CA, CO, CT, MN, OR, RI, VT

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

6 Questions7 Answers

Customer Questions & Answers

1-gal. #875 White Basement and Masonry Waterproofer
1-gal. #875 White Basement and Masonry Waterproofer

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 1-gal. #875 White Basement and Masonry Waterproofer
 
2 answers

Can you use a airless sprayer to apply?

This question is from 1-gal. #875 White Basement and Masonry Waterproofer
Asked by
Read all my Q&A
August 4, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
August 9, 2016
Answer: 
Hi JonF,
Yes, the Basement and Masonry Waterproofer can be applied with an airless sprayer. We recommend using a .023"-.027" tip (no filter). Happy painting! - Sara
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

August 5, 2016
Answer: 
Yes, the waterproofer can be applied with a sprayer.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from 1-gal. #875 White Basement and Masonry Waterproofer
 
1 answer

Do I have to leave the house when I use it

This question is from 1-gal. #875 White Basement and Masonry Waterproofer
Asked by
Read all my Q&A
July 12, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Read all my Q&A
July 13, 2016
Answer: 
Hi Bub123,
Thanks for your question. Although the paint gives off an odor as it's drying, it's not necessary to leave the house. Just make sure to ventilate the space by opening any doors and/windows. It also helps to face a fan pointing an open door/window. Hope this helps, and good luck on your project! Best, Jeanette
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from 1-gal. #875 White Basement and Masonry Waterproofer
 
1 answer

can this be used on ICF foam forms?

This question is from 1-gal. #875 White Basement and Masonry Waterproofer
Asked by
Read all my Q&A
April 26, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Read all my Q&A
April 27, 2016
Answer: 
Hi diditmyself, Thank you for your question! This product is recommended for use on walls subject to hydrostatic pressure. It is ideal for above or below grade
Basement Walls, Retaining Walls, Garage Walls, Masonry Walls, Cinder Blocks,
Stucco, Brick, Foundations and Landscape Walls. Apply to dry or slightly damp
surfaces. It is not for use on floors or walls with active water leaks.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from 1-gal. #875 White Basement and Masonry Waterproofer
 
1 answer

My cashier wants stripes in the basement, can you use this as a primer?

This question is from 1-gal. #875 White Basement and Masonry Waterproofer
Asked by
Read all my Q&A
February 17, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Read all my Q&A
February 18, 2016
Answer: 
Hi Mel,
Thanks for your interest in our Behr Premium Basement & Masonry Waterproofer. This coating can be topcoated with any water based paint. Please refer to the product label for specific surface preparation and application instructions.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-09-08 T11:19:46.403-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203938579, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 152ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.7 out of 5 by 60 reviewers.
Rated 5.0 out of 5.0 by Tough paint I didn't do a whole lot of surface prep for a clean are block basement wall. Scraped it with a stiff brush and put on 1 thick layer with with a cheap brush with a few touch ups afterward. Some of the block was very slightly damp from condensation and it was no problem to paint over it. I just put a fan on it and it dried in no time. It was easy to apply, went on easily but not too drippy either. After a week or so I tested the adhesion with a wire brush and it took a lot of hard scraping to get through the layer of paint. It cleans up and touches up easily. There was a very slight ammonia smell but I had no problem painting indoors for hours with this paint. Its great if you can ventilate the area but it does not smell strong. July 15, 2016
Rated 5.0 out of 5.0 by Works to waterproof basement walls IF you follow directions Surface must be clean and dry - any moisture or efflorescence and it won't adhere, no paint will. You also need to solve leak source - paint won't stop a flood. I used it on a leaky basement laundry room. 1st redirected downspouts and graded soil away from house. Then cleaned interior bsmt walls with UGL etch. Spent 2 weeks with dehumidifier drying out walls to bone dry. Skimmed with Sacrete surface bonding cement and let dry completely (another 2 weeks). Two coats of Behr waterproofer and basement has been dry for a year - had been damp for 20! Take your time, follow instructions, and this is a great deal. BUT you need to solve your leak source whether drainage/grading or water supply/downspout. Wife wanted it tinted slate blue (over my objections) and must admit she was right, color looks good. Also have used this under foam board insulation when finishing basements. June 28, 2016
Rated 5.0 out of 5.0 by My garage is dry now! This waterproofer has worked very well for me. I am a contractor and I was working on a house that were are planning to set on market in a few days. The house walls are made out of concrete blocks and after every rain we would have water in the basement garage. So, I've used Concrete all-in-1-step cleaner from Berh and pressure washed the wall to remove all loose particles. After that I had to apply some concrete caulk/waterproofer from Home Depot to seal 1/8-1/4 inch pinholes. Two coats of Concrete and Basement Waterproofer was applied with a roller. It is interior wall below the grade (~8 ft below the grade). So, 3 days after that application we had almost two days of rain non-stop and my garage is dry! We are ready to set the house on market and I will start the advertisement this afternoon! Thank you Berh for a great product! August 23, 2016
Rated 5.0 out of 5.0 by Best Basement Paint This paint is great because it goes on smoothly and covers well. August 30, 2016
Rated 5.0 out of 5.0 by Easy to work with The product was ordered online and delivered to our house. It did need some stiring. I would rather buy it in the store and have it shaken August 18, 2016
Rated 5.0 out of 5.0 by Good Appearance and Adherence Applied to unpainted dark gray cinder block walls to brighten appearance of basement After a month, it looks fine. Did not use primer. Brushed on heavy first coat to fill in pores; this was essential to obtaining good coverage in two coats. Applies smoothly, but allow plenty of time--especially for first coat. Paint is very thick and difficult to stir. I bought a gallon at a time, so HD could put paint in shaker shortly before application. Basement is dry, so cannot judge water blocking ability. No bad smell. Good appearance and adherence. HD Memorial week rebate of ten dollars per gallon was a nice added incentive. I'm a happy customer. June 21, 2016
Rated 5.0 out of 5.0 by Best Basement Paint This paint is great because it goes on smoothly and covers well. August 30, 2016
Rated 4.0 out of 5.0 by better then I expected paint went on easy, not much of a smell, did not have yellow spots coming through like all other paints I used in the bastment. August 20, 2016
  • 2016-09-30 T20:06:00.157-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_60, tr_60
  • loc_en_US, sid_203938579, prod, sort_default
2 3 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 83ms
  • REVIEWS, PRODUCT