Model # 87601

Internet #202263945

Store SKU #110680

BEHR Premium 1-gal. #876 Basement Gray Basement and Masonry Waterproofer

BEHR Premium

1-gal. #876 Basement Gray Basement and Masonry Waterproofer

$27.98 /each

Frequently Bought Together

Product Overview

Behr 1-gal. Basement and Masonry Waterproofing Paint with NanoGuard technology is a premium, interior/exterior waterproofer. This is designed for porous concrete and masonry surfaces. This low odor, masonry waterproofer is formulated for waterproofing.

California residents: see   Proposition 65 information

  • Withstands 12 psi of water pressure
  • 100% styrene acrylic, mildew resistant film
  • Smooth, decorative flat finish
  • Waterproofs interior/exterior masonry walls
  • Click here to learn more about waterproofing
  • Online Price includes a Paint Care fee in the following states: CA, CO, CT, DC, ME, MN, OR, RI and VT

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Can I appy this to stucco exterior wall with hairline crack (water is seeping inside my window). Or would you recommend another product?

Asked by: Nick
I'm a general contractor and see this all the time. If the crack it from the stucco shrinking and pulling away from the window frame, you need s good exterior caulk. If vulkem 116 has a color that matches ok I recommend that, otherwise Quad OSI would be a second. Here in Burnsville, MN our tempstures are drastic and can be difficult for cheaper products. If the crack is in the middle of the wall somewhere, an elastomeric paint will be a good "fix". The only thing that seals the wall with cracks is scim coating the wall to ensure uniformity in color and texture. Good luck!
Answered by: CapstoneBros
Date published: 2017-02-27

Is this an Odor Blocker Also?

I was thinking of using Kilz Oil Based Primer and Sealer because it has an Odor Blocking trait. Does this block odor also?
Asked by: BigBern
Although this is not specifically an odor blocker, I did notice an improvement in the basement air after using it. A very subjective of a thing but worth mentioning.
Answered by: Jess
Date published: 2016-07-16

Can you use on a basement floor, getting a little seepage in 2 small spots?

Asked by: Mary
Just got off the phone with the Manufacturer. Behr does not recommend this product for floors. Walls only. -Jon.
Answered by: Jon
Date published: 2016-12-12

Can this product be applied using a sprayer?

Asked by: Anonymous
Yes. I sprayed this product with a Graco 495 with a 517 tip on full bore. No problems, worked like a champ. Spray product on and backroll with a 3/4 nap. Didn't even need a brush. Spraying this product is my preferred choice for this product... pressing a 9" inch roller into concrete all day gets old real quick.
Answered by: hardmf
Date published: 2016-12-30
  • y_2017, m_3, d_24, h_13CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_230
  • loc_, sid_202263945, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 18ms

Customer Reviews

1-gal. #876 Basement Gray Basement and Masonry Waterproofer is rated 4.5 out of 5 by 96.
Rated 5 out of 5 by from Good Appearance and Adherence Applied to unpainted dark gray cinder block walls to brighten appearance of basement After a month, it looks fine. Did not use primer. Brushed on heavy first coat to fill in pores; this was essential to obtaining good coverage in two coats. Applies smoothly, but allow plenty of time--especially for first coat. Paint is very thick and difficult to stir. I bought a gallon at a time, so HD could put paint in shaker shortly before application. Basement is dry, so cannot judge water blocking ability. No bad smell. Good appearance and adherence. HD Memorial week rebate of ten dollars per gallon was a nice added incentive. I'm a happy customer.
Date published: 2016-06-21
Rated 5 out of 5 by from Tough paint I didn't do a whole lot of surface prep for a clean are block basement wall. Scraped it with a stiff brush and put on 1 thick layer with with a cheap brush with a few touch ups afterward. Some of the block was very slightly damp from condensation and it was no problem to paint over it. I just put a fan on it and it dried in no time. It was easy to apply, went on easily but not too drippy either. After a week or so I tested the adhesion with a wire brush and it took a lot of hard scraping to get through the layer of paint. It cleans up and touches up easily. There was a very slight ammonia smell but I had no problem painting indoors for hours with this paint. Its great if you can ventilate the area but it does not smell strong.
Date published: 2016-07-15
Rated 5 out of 5 by from Works to waterproof basement walls IF you follow directions Surface must be clean and dry - any moisture or efflorescence and it won't adhere, no paint will. You also need to solve leak source - paint won't stop a flood. I used it on a leaky basement laundry room. 1st redirected downspouts and graded soil away from house. Then cleaned interior bsmt walls with UGL etch. Spent 2 weeks with dehumidifier drying out walls to bone dry. Skimmed with Sacrete surface bonding cement and let dry completely (another 2 weeks). Two coats of Behr waterproofer and basement has been dry for a year - had been damp for 20! Take your time, follow instructions, and this is a great deal. BUT you need to solve your leak source whether drainage/grading or water supply/downspout. Wife wanted it tinted slate blue (over my objections) and must admit she was right, color looks good. Also have used this under foam board insulation when finishing basements.
Date published: 2016-06-28
Rated 4 out of 5 by from Waterproofing paint Needs two coats but works well. Goes on a little thick.
Date published: 2016-10-04
Rated 5 out of 5 by from Excellent product! Finally I don't have puddles on the floor of my Michigan basement every time it rains or the snow melts . I applied 2 coats to the walls with a large brush due to the stones. It was an easy Saturday morning . No mess, stays where you put it. Dries quickly and no smell. That afternoon we had an unexpected down pour and not a drop made it through.
Date published: 2016-10-25
Rated 4 out of 5 by from Great product so far Pros, looks great, very little smell, easy to spread, did the job only had moisture in a very small area in cornersnd no water ever was in my basement. Cons: a gallon doesnt get you far, maybe 8 feet high by 10 feet wide double coated. Took me about 10-12 hours to paint 3 gallons. Glad it's all day, paint looks fantastic. Glad I chose this over drylok. Again I just had moisture on a couple blocks if it eve was moisture. If you are going to use this brush it don't roll it!! It probably faster to brush. The roller can't get deep into the block like the brush can and after day 1 I put the roller away. Saved 0 time. Haven't had a big rain yet but again moisture wasn't an issue for me but 1 tiny corner and block is in great shape still so no water concerns anyways. Love the look and is just nice knowing I have some protection now since my townhouse doesn't have gutters. If I knew how to post pictures I would, can find the upload area on my phone writing this review. Also I have no experience in updating houses, I'm the first one t say just pay someone to do it.
Date published: 2017-02-18
Rated 4 out of 5 by from The coverage for the first coat over old cinder block was 60 Sq Ft per gallon the second coat was... The coverage for the first coat over old cinder block was 60 Sq Ft per gallon the second coat was much better at 120 Sq Ft per gallon. Vary happy with the results!
Date published: 2017-01-10
Rated 4 out of 5 by from Note that two coats are recommended for bare masonry block walls. This is not mentioned in the o... Note that two coats are recommended for bare masonry block walls. This is not mentioned in the on-line information but is stated on the can label.
Date published: 2017-01-18
  • y_2017, m_3, d_25, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_96
  • loc_, sid_202263945, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 17ms