Model # 87501

Internet #203938644

BEHR Premium 1-gal. #BW-55 Nordic Sky Basement and Masonry Waterproofer

BEHR Premium

1-gal. #BW-55 Nordic Sky Basement and Masonry Waterproofer

$27.98 /each

Frequently Bought Together

Product Overview

The BEHR Premium Basement and Masonry Waterproofer with NanoGuard Technology is an interior/exterior waterproofer with a 10 year customer satisfaction guarantee. It is designed for porous masonry surfaces and withstands up to 12 PSI of hydrostatic pressure and 98 mph wind-driven rain. This low odor, mildew resistant waterproofer provides a smooth, decorate finish that is sprayable for easy application. Ideal for use on above and below grade walls, retaining walls, garage walls, masonry walls, cinder blocks, stucco, brick, foundations and landscape walls.

California residents: see   Proposition 65 information

  • Ideal for interior and exterior vertical concrete and masonry walls
  • 10 year customer satisfaction guarantee
  • Mildew resistant finish
  • Withstands 12 PSI of hydrostatic pressure and 98 mph wind-driven rain
  • 100% Styrene Acrylic
  • Available in custom colors
  • Durable Flat finish
  • 75 - 125 sq. ft. of coverage per-gal.
  • Sprayable, saves application time
  • Easy clean-up with soap and water
  • Online Price includes Paint Care fee in the following states: CA, CO, CT, MN, OR, RI, VT

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

207 Questions282 Answers

Customer Questions & Answers

1-gal. #BW-55 Nordic Sky Basement and Masonry Waterproofer
1-gal. #BW-55 Nordic Sky Basement and Masonry Waterproofer

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
0 answers

Can I apply this product to damp concrete block?

This question is from 5-gal. Basement and Masonry Waterproofing Paint
Asked by
Read all my Q&A
October 28, 2016
Can I apply this product to damp concrete block?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

The paragraph description says it withstands up to 12 PSI of hydrostatic water pressure. But the chart says up to 10 PSI. Which is it?

This question is from 1-gal. Basement and Masonry Waterproofer
Asked by
Read all my Q&A
October 21, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Read all my Q&A
October 24, 2016
Answer: 
Hello painter,
Thanks for your question, and sorry about the confusion. The product can actually withstand up to 12 psi of hydrostatic pressure built up in walls. Please be sure to follow all label instructions for best results. Well wishes!
-Joshua
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

Leak through masonry wall

This question is from 1-gal. #876 Basement Gray Basement and Masonry Waterproofer
Asked by
Texas
Read all my Q&A
October 20, 2016
I have a leak that I am unable to pinpoint. Water is dripping in from an exterior stone siding of my home to the inside of the wall. I caulked all the mortar joints and after spayed water on the exterior wall and water is still dripping in. If I cover the entire suspected area of the interior wall with your product, do you believe this may resolve my issue.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
October 24, 2016
Answer: 
Hello david78660,
We appreciate your question. Yes, the walls can be damp, but any active water leaks would need to be stopped before applying our product. Otherwise, the product may fail. If unable to stop the leaks, you might check with Home Depot for another brand's coating that could suit your project needs. Best wishes for your project!
-Joshua
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

October 20, 2016
Answer: 
Although it can be used on masonry walls, it shouldn't be applied to an area with active water leaks.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

I have bare concrete block walls on slab foundation that I would like to seal. Do I need to parge coat block first?

This question is from 5-gal. Basement and Masonry Waterproofing Paint
Asked by
Read all my Q&A
October 18, 2016
New construction
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
October 19, 2016
Answer: 
Hello Kate,
We appreciate your question. If you've got cracks or gaps in the concrete slab, then yes, we'd recommend patching those areas with a fast setting hydraulic cement. Then, prime with a product such as our No. 436 Multi-Surface Primer & Sealer. Please be sure to follow all label instructions for best results. Well wishes for your project!
-Joshua
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

October 18, 2016
Answer: 
The concrete walls can be painted as they are.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 3 4 5  ... 12 »
  • 2016-10-31 T00:20:32.681-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203938644, prod, sort_default
2 3 4 5  ... 12 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 41ms
  • QUESTIONS, PRODUCT

Customer Reviews

1-gal. #BW-55 Nordic Sky Basement and Masonry Waterproofer is rated 4.8 out of 5 by 68.
Rated 5 out of 5 by from Good Appearance and Adherence Applied to unpainted dark gray cinder block walls to brighten appearance of basement After a month, it looks fine. Did not use primer. Brushed on heavy first coat to fill in pores; this was essential to obtaining good coverage in two coats. Applies smoothly, but allow plenty of time--especially for first coat. Paint is very thick and difficult to stir. I bought a gallon at a time, so HD could put paint in shaker shortly before application. Basement is dry, so cannot judge water blocking ability. No bad smell. Good appearance and adherence. HD Memorial week rebate of ten dollars per gallon was a nice added incentive. I'm a happy customer.
Date published: 2016-06-21
Rated 5 out of 5 by from Tough paint I didn't do a whole lot of surface prep for a clean are block basement wall. Scraped it with a stiff brush and put on 1 thick layer with with a cheap brush with a few touch ups afterward. Some of the block was very slightly damp from condensation and it was no problem to paint over it. I just put a fan on it and it dried in no time. It was easy to apply, went on easily but not too drippy either. After a week or so I tested the adhesion with a wire brush and it took a lot of hard scraping to get through the layer of paint. It cleans up and touches up easily. There was a very slight ammonia smell but I had no problem painting indoors for hours with this paint. Its great if you can ventilate the area but it does not smell strong.
Date published: 2016-07-15
Rated 5 out of 5 by from Works to waterproof basement walls IF you follow directions Surface must be clean and dry - any moisture or efflorescence and it won't adhere, no paint will. You also need to solve leak source - paint won't stop a flood. I used it on a leaky basement laundry room. 1st redirected downspouts and graded soil away from house. Then cleaned interior bsmt walls with UGL etch. Spent 2 weeks with dehumidifier drying out walls to bone dry. Skimmed with Sacrete surface bonding cement and let dry completely (another 2 weeks). Two coats of Behr waterproofer and basement has been dry for a year - had been damp for 20! Take your time, follow instructions, and this is a great deal. BUT you need to solve your leak source whether drainage/grading or water supply/downspout. Wife wanted it tinted slate blue (over my objections) and must admit she was right, color looks good. Also have used this under foam board insulation when finishing basements.
Date published: 2016-06-28
Rated 4 out of 5 by from better then I expected paint went on easy, not much of a smell, did not have yellow spots coming through like all other paints I used in the bastment.
Date published: 2016-08-20
Rated 5 out of 5 by from Performs miracles! We have been living with a wet basement (sump pump) for 6 years. When we decided to put our house up for sale we thought we should paint the basement, if even for just aesthetic purposes. I never thought our basement would actually be dry, considering the puddles we've had over the years during spring and heavy rains. Well, I painted about a month ago and the sump pump hasn't gone off since! Unbelievable! The paint went on easily. We used 2 coats on the walls that are known to seep and 1 on the rest. Our basement is about 20x25 and I was able to complete it all in one weekend with limited help from my husband. The smell bothered him but I thought it was reasonable. We used a brush for the edges and nooks and crannies and a roller in between. We painted over moist walls. The wet walls took longer to dry by about a day. I recommend it 100% and wish we had done it sooner.
Date published: 2016-08-01
Rated 5 out of 5 by from My garage is dry now! This waterproofer has worked very well for me. I am a contractor and I was working on a house that were are planning to set on market in a few days. The house walls are made out of concrete blocks and after every rain we would have water in the basement garage. So, I've used Concrete all-in-1-step cleaner from Berh and pressure washed the wall to remove all loose particles. After that I had to apply some concrete caulk/waterproofer from Home Depot to seal 1/8-1/4 inch pinholes. Two coats of Concrete and Basement Waterproofer was applied with a roller. It is interior wall below the grade (~8 ft below the grade). So, 3 days after that application we had almost two days of rain non-stop and my garage is dry! We are ready to set the house on market and I will start the advertisement this afternoon! Thank you Berh for a great product!
Date published: 2016-08-23
Rated 5 out of 5 by from Paint went on smoothly. As directed we needed 2 coats. First was sucked right in the block, secon... Paint went on smoothly. As directed we needed 2 coats. First was sucked right in the block, second covered real nice.
Date published: 2016-11-01
Rated 4 out of 5 by from Waterproofing paint Needs two coats but works well. Goes on a little thick.
Date published: 2016-10-04
  • y_2016, m_12, d_9, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_68
  • loc_, sid_203938644, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 33ms
  • REVIEWS, PRODUCT