Model # 95536

Internet #203938269

BEHR Premium 1-gal. #PFC-28 Desert Sandstone 2-Part Epoxy Garage Floor Coating Kit

Discontinued BEHR Premium

1-gal. #PFC-28 Desert Sandstone 2-Part Epoxy Garage Floor Coating Kit

Frequently Bought Together

Product Overview

The BEHR Premium 2-Part Epoxy Garage Floor Coating is a decorative high-performance, water-based concrete floor coating. It provides long-lasting protection against motor oil, gasoline, antifreeze, brake fluid, salt, and hot tire pick-up. This durable semi-gloss finish is easy-to-clean and also resists scuffing, fading, cracking, peeling and blistering. It requires no priming and once mixed, is ready for use, allowing up to 4 hours of working time (pot life). It is formulated to withstand the harsh elements common to most interior concrete floors, new and old, while maintaining an easy-to-clean, showroom quality appearance. Ideal for use on garage floors, basements and other interior concrete floors.

California residents: see   Proposition 65 information

  • Ideal for interior concrete floors
  • Resists scuffing, fading, cracking and peeling
  • Resists motor oil, gasoline, antifreeze, brake fluid, salt and hot tire pick up
  • Epoxy acrylic formula
  • Available in custom colors
  • Up to 250 sq. ft. of coverage per kit
  • Durable Semi-Gloss finish
  • Easy clean-up with soap and water
  • All inclusive project kit
  • Kit includes: cleaner/etcher, color flakes, 3/8 in. roller cover, 2 in. brush, stir stick
  • Actual paint colors may vary from on-screen and printer representations

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Do I need to apply a sealer after this 2 part epoxy is applied?

Asked by: welchjoshd
Hello and thank you for your question. No, you do not need to apply a sealer on top of this product. Hope this helps and best of luck on your project!
Answered by: Behr
Date published: 2015-09-20

I have a new concrete floor that I want to coat with Behr 2-part apoxy paint - do I need to etch the floor? Is there a minimum cure time for concrete

Asked by: Anonymous
Dear garage floor, Thanks for considering our Behr Premium 2-Part Epoxy Garage Floor Coating for your project. We highly recommend your new concrete floor to cure at least 30 days before subjecting to any coatings. All floor coating project require some form of surface preparation to ensure a long-lasting durable and professional looking finish. Our 2-Part Epoxy Garage Floor Coating Kit does include most of the necessary items needed to complete your project. For your new concrete floor, listed are the required preparation steps. 1. Check the surface to ensure it is not sealed or have high amounts of hydrostatic pressure (ground moisture). To check for a sealer, Test the surface by dripping a small amount of water onto the surface. If water beads and continues to stay on top, it indicates that a sealer is present and the BEHR Premium 2-Part Epoxy may not adhere. The sealer must be removed before using this product. After stripping, re-test the surface for water absorbency. To check for excessive hydrostatic pressure, by taping a 3’ x 3’ (1 x 1 m) piece of plastic directly to the concrete using duct tape on all edges. Allow the plastic to sit for 24 hours. If water droplets appear on the inside of the plastic after 24 hours or if the concrete is damp, the surface contains moisture and the floor should not be painted. Moisture problem must be corrected before coating. 2. The surface must be clean, dry and free of dust, dirt, grease, oil, curing agents and all other contaminants. 3. Our 2-Part Epoxy Garage Floor Coating Kit includes a Cleaner/Etcher packet: For proper penetration and adhesion of topcoat, use Cleaner/Etcher (included in kit). Wear protective clothing, eye goggles and acid resistant rubber gloves and footwear. Dissolve all concentrated powder with 1 gallon of warm water in a plastic container and stir. Pre-wet the surface with water. Apply all solution using a plastic watering can. One gallon of dissolved solution will etch and clean approximately 200 - 250 sq. ft.  Allow product to stand for 10 minutes, then scrub vigorously using a stiff plastic brush. Please refer to the instruction guide for application instructions.
Answered by: Behr
Date published: 2015-09-17

What was the original price

Asked by: peck
Thank you for your recent inquiry with The Home Depot, peck. We are only able to verify current pricing. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot.
Answered by: THDSupport
Date published: 2016-09-21

is it good for a drive way in Florida ?

Asked by: Gaetan
Hello and thank you for your question. No, we do not recommend BEHR PREMIUM® 2-Part Epoxy Garage Floor Coating Kit, as it is designed for interior garage floors protected from the sun and other interior concrete surfaces. Instead, we suggest that you consider BEHR PREMIUM® 1-Part Epoxy Concrete & Garage Floor Paint which is designed for interior and exterior concrete and masonry surfaces and protects against hot-tire pick-up and automotive fluids. Hope this helps, and best of luck on your project!
Answered by: Behr
Date published: 2015-09-20
  • y_2017, m_5, d_24, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_13
  • loc_, sid_203938269, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 135ms

Customer Reviews

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 110ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;