Model # 95036

Internet #203938291

BEHR Premium 1-gal. #PFC-55 Sea Cave 2-Part Epoxy Garage Floor Coating Kit

Discontinued BEHR Premium

1-gal. #PFC-55 Sea Cave 2-Part Epoxy Garage Floor Coating Kit

Frequently Bought Together

Product Overview

The BEHR Premium 2-Part Epoxy Garage Floor Coating is a decorative high-performance, water-based concrete floor coating. It provides long-lasting protection against motor oil, gasoline, antifreeze, brake fluid, salt, and hot tire pick-up. This durable semi-gloss finish is easy-to-clean and also resists scuffing, fading, cracking, peeling and blistering. It requires no priming and once mixed, is ready for use, allowing up to 4 hours of working time (pot life). It is formulated to withstand the harsh elements common to most interior concrete floors, new and old, while maintaining an easy-to-clean, showroom quality appearance. Ideal for use on garage floors, basements and other interior concrete floors.

California residents: see   Proposition 65 information

  • Ideal for interior concrete floors
  • Resists scuffing, fading, cracking and peeling
  • Resists motor oil, gasoline, antifreeze, brake fluid, salt and hot tire pick up
  • Epoxy acrylic formula
  • Available in custom colors
  • Up to 250 sq. ft. of coverage per kit
  • Durable Semi-Gloss finish
  • Easy clean-up with soap and water
  • All inclusive project kit
  • Kit includes: cleaner/etcher, color flakes, 3/8 in. roller cover, 2 in. brush, stir stick
  • Actual paint colors may vary from on-screen and printer representations

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

how to apply paint chips

Asked by: Anonymous
I found the best method was to toss the paint chips in the air. If you toss them towards the floor, they sometimes land too closely together. Once they hit the paint, they are there. Period.
Answered by: Bill
Date published: 2015-09-20

Can this epoxy be custom tinted

Asked by: Anonymous
Yes - You can ask the Paint Associate at The Home Depot to scan a sample you provide and they can generally match the color in most paint products. Some colors may not be reproducible, but the Paint Associate will assist you.
Answered by: Mizterz
Date published: 2015-09-20

Do I need to apply a sealer after this 2 part epoxy is applied?

Asked by: welchjoshd
Hello and thank you for your question. No, you do not need to apply a sealer on top of this product. Hope this helps and best of luck on your project!
Answered by: Behr
Date published: 2015-09-20

Does this kit come in customer selected colors?

How are custom colors ordered on line when your color choice is not listed?
Asked by: John
Hi John, Thank you for your interest in our Behr Premium 2-Part Epoxy Garage Floor Coating. Our 2-Part Epoxy Floor Coating is available in pre-mixed Tan and Silver Gray. Additionally these bases can be tinted into 26 popular select custom floor coating colors. These colors are available to view and order online from The Home Depot website.
Answered by: Behr
Date published: 2015-09-20
  • y_2017, m_3, d_24, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_18
  • loc_, sid_203938291, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 83ms

Customer Reviews

1-gal. #PFC-55 Sea Cave 2-Part Epoxy Garage Floor Coating Kit is rated 3.0 out of 5 by 30.
Rated 1 out of 5 by from Behr 2 Part Epoxy I have used this product a couple times before with limited problems with the product. It has been inconsistant with getting the same results or each can is a little different. We followed the instructions to the letter. Our customer on this last job with this product called me and told me the floor was coming up and not just under the tires but all over. I will not use this product again and will not accept work with the Behr products. I now have to go through the warranty paperwork to prove it was a bad product and in order to get refunds on products we used and new product to redo. Bad product makes my business look bad too.
Date published: 2009-10-01
Rated 2 out of 5 by from BEHR 2-part epoxy floor Paint SKU# 102364 Pro's - good color selection, liked the additional color selections as I did not want to use the flake chips ( try to find a small screw or nail accidently dropped on a rough multicolor surface), adheres well on a properly prepared surface. Cons - This water based coating is very thin, approx 2 mills in comparison to a real epoxy finish that is 9 to 16 mills. it does not fill any rough areas in the concrete (used a pressure washer to prep the surface which ate away the smooth finish in problem areas). final appearance same as a thin stain. floor chips easily since the coating is so thin. will now have to purchase a real epoxy clear seal to finish the floor, so my cost just doubled.
Date published: 2009-04-12
Rated 1 out of 5 by from product has problems We hired a contractor to apply a custom color to our garage floor. He prepped the floor with a sander and acid. Black showed through the color. He waited two days and then applied a second coat of the epoxy to our 2 car garage. About 10 days later, there was a rapid temperature change and the floor was slippery and slick. Behr Technical support was helpful and explained that it was due to surfactant leaching. On Christmas Eve day we washed the floor with Dawn/water, rinsed and allowed it to dry. This seemed to work. We kept the car out of the garage for two weeks to be sure the floor was dry. When we drove the car in the garage, tread marks appeared. And with the next rapid temperature swing, the slippery floor returned. We are now searching for another product to apply to our floor.
Date published: 2014-01-22
Rated 4 out of 5 by from Works Fine but extra chips make better pattern Used on carefully prepared garage floor. Applied with roller in 4' strips so I would be able to broadcast chips as I went. Takes care to get good pattern with chips and to keep them away from wet edge to avoid picking them up in roller on next pass. I had previous experience with chips so bought a couple of extra packages. That allowed my to make more dense pattern which will conceal "clumps" that are hard to avoid. Wife loves it. [This review was collected as part of a promotion.]
Date published: 2014-07-11
Rated 5 out of 5 by from Great Product We have our own business, and do many home improvements. We have done 4 floors with this paint. It is easy, and give a wonderful finish. The kit gives you everything you need, even the color flakes if you want them. The paint is definitely durable and takes wear and tear that you have in a garage. We will continue to use this product, and have recommended it many times.
Date published: 2012-10-04
Rated 1 out of 5 by from Terrible Results The product has fairly easy to follow instructions, and looks wonderful when finished but....., after soon after driving on the product it picks up even when the tires are not hot!!!!. I prepared the surface with a cleaning agent, muriatic acid and then the kit supplied cleaner/etcher, rolled on the epoxy and 3 coats of their recommended wet look sealer. I looked amazing, came out better then I was expecting. My friends thought I had it professionally done. I had a plenty of time to look at the empty garage because I waited the recommended 14 days before driving on the floor. I bought a laser temperature gun to make sure the tires were always cool before driving in for the evening, my neighbors even commented on how I would always come home and wait till night to pull my cars in. Now it has only been a few weeks and the area under my tires are pulling up like crazy. Looks terrible and not sure what to do. I know most people get in a hurry and do not follow the recommended instructions from the manufacture so I was not in a hurry and followed them to a tee, I even made a few phone calls to the Customer Service for clarification but all for not, crummy product that I believe is inferior and should not be on the store shelves. My friend has one of Behrs competitors products in his garage and 6 years later its comparable to mine in less then 3 months.
Date published: 2015-10-29
Rated 2 out of 5 by from Not Sure it is Worth your Money When you open the box, you’ll notice that the kit includes a powder acid mix, sprinkles for the floor, a brush, a roller head, a roller tray attachment for the box, a mixing stick, and a quart of “applicator,” which is essentially the color. After cleaning the floor, you add the applicator to the white paint, which just sits in the front of the box with no cover beyond the outside box cover. However, I stress that this is a small amount of paint. The box is misleading. It says it covers 250 square feet, but because of the porous nature of the acid etched concrete, it only covers roughly half of that area. If you want to complete your project, you’ll have to buy another kit (I have a one car garage). They don’t sell the 2-part epoxy by itself. They just sell the one part. My wife and had had to run over to Home Depot to buy another kit so the floor could dry at the same time. Unfortunately, after taxes, those kits come out to about $78 each. At least we have an extra brush, roller head, sprinkles, and acid mix for another project. The floor looks nice, but the whole kit system needs to be improved. I just wish they sold a larger kit for say $120 instead of forcing people to buy two. Beware: if you’re on a tight budget, $78 is expensive for 120 square feet, $156 is much more.
Date published: 2011-07-14
Rated 1 out of 5 by from pure fantasy i can guarantee you the picture on the box is of a floor immediately after the coating was applied, and perhaps before it has even fully dried. there is no way any garage floor coated with this product would look like that after a vehicle has parked on it even just once, no matter how closely the instructions are followed. the etcher is a joke as far as prepping a real garage floor to accept a coat of any product. don't bother with it. if it isn't a new garage floor, lightly grind off the very top surface to prep it for whatever you put down. this epoxy is product VERY THIN (most will evaporate) and there is BARELY enough to cover a 1-car garage, so as soon as it dries it will be like the thinnest layer of paint you can imagine. no matter how long you let it dry, it is a magnet for hot tire marks. you will have thick black treadmarks the first time you drive around and park on this surface, and odds are your tires will pull up this covering where you park within a week even if you follow all the instructions. it is money down the drain and a waste of time and effort. [This review was collected as part of a promotion.]
Date published: 2016-01-26
  • y_2017, m_3, d_25, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_30
  • loc_, sid_203938291, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 82ms