Free Shipping and BOPIS

BEHR Premium

Model # 98505

Internet # 202263928

Store SKU # 582809

5-gal. Wet Look Sealer

This item has been discontinued.
The Home Depot no longer carries this specific product.



Model # 98505

Internet # 202263928

Store SKU # 582809

BEHR PREMIUM Wet-Look Sealer is a clear, non-yellowing, high solids, acrylic-based masonry sealer. It is formulated to seal, protect and beautify concrete and masonry surfaces with a high gloss finish. It is also an excellent topcoat for paints and stains. Ideal for use on use on previously coated/uncoated, vertical/horizontal, interior/exterior surfaces such as: pavers, concrete, mexican tile and unglazed tiles, brick, aggregate, natural and artificial stone, masonry and stucco.

California residents: see  Proposition 65 information

  • Ideal for interior and exterior, vertical and horizontal concrete and masonry surfaces
  • Clear, Non-Yellowing, Acrylic-Based Sealer
  • Protect and Beautify Concrete and Masonry
  • 100% Acrylic Latex
  • Excellent Topcoat over Paints and Stains
  • Click here to learn more about exterior stain products
  • Durable High-Gloss Finish
  • Easy clean-up with soap and water
  • Actual paint colors may vary from on-screen and printer representations
  • Online Price includes Paint Care fee in the following states: CA, CO, CT, MN, OR, RI, VT

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Container Size 
5 GA-Gallon 
Coverage Area (sq. ft.) 
Product Size (oz.) 
Application Method 
Soap and Water 
Coating Product Category 
Color Family 
Wet Look Sealer 
Concrete Use 
Deck Use 
Dries clear 
Dry to the touch (hours) 
Dry to touch (min.) 
Mildew Resistant 
Number of coats recommended 
Clear-Crystal Clear 
Paint Product Type 
Paint/Stain Key Features 
Dries Clear,Sealer 
Substrate/Surface Use Type 
Time before recoating (hours) 
Clear-Crystal Clear 
UV Protection 
UV Resistant 
Warranty / Certifications
Manufacturer Warranty 
Limited Warranty 


Rated 2.6 out of 5 by 28 reviewers.
Rated 1.0 out of 5.0 by Poor Result I was wondering if someone could tell me what I did wrong. I rolled the product on my cobblestone patio and ended up with a white washed finish. I can not even see the color of my stones anymore. I perhaps applied too much of it, but ended up being very bubbly and white washed look. July 17, 2014
Rated 1.0 out of 5.0 by Milky finish on colored concrete I tried 4 different times to make this turn out without a milky white finish over my tan colored concrete and everytime it was a failure. The folks at Behr who told me it would improve after it was fully cured, unfortunately there has been no change in a month. It says wet look which would lead you to believe it would add a nice rich look however it did the exact opposite. I bought a different sealer and it turned out perfect the first time. The Behr product is going back and I have my fingers crossed that the Stripper works better than this did. See the pics, the poor result is beyond explanation. The 3 milky spots are from the Behr Sealer - Darkest is from the other manufacturers product - Next to that is the bare colored concrete On other areas with larger exposed aggregate it did leave a nice shine on the exposed rocks but the color in between is milky white. July 23, 2012
Rated 5.0 out of 5.0 by Good Results I am a homeowner, not a professional painter. I used the Behr Premium Wet-Look Sealer on stamped concrete that is about 12-years old. I power washed the concrete then waited a day to apply the sealer. When applying the sealer, I used a common hand pump pressure sprayer with the pressure pumped up very high. I sprayed a light coat of sealer and my son followed with a 1/4 roller to ensure no puddles and an even coat. Key is not pushing to hard on the roller. After allowing 4-hours for drying, we applied a second coat. I like that the clean up is with soap and water. The resulting finish on the concrete is very shiny. I am eager to see how long it lasts. July 20, 2015
Rated 1.0 out of 5.0 by Milky white patches After sanding, cleaning, etching and cleaning some more, I applied a beautiful coat of two color stains to about 1600 sf of concrete floors- looked phenomenal! After waiting two days to insure the floors were dry, I applied BEHR Wet Look Sealer. 24hrs later I have patchy milky white areas. The 1st technician told me to give it another 24 hrs; the 2nd technician told me to apply a 2nd coat as a test. No changes, milky white patches are still showing. Behr was helpful in reimbursing me for my stain and sealer, but I am now sanding/stripping and starting over. August 3, 2015
Rated 1.0 out of 5.0 by Disappointing product 4/15 Product is very difficult to apply. Use of too much product leaves a milky finish. Correct application requires a lot of work to obtain correct finish. The thinner the layer, the better the result will be. April 12, 2015
Rated 1.0 out of 5.0 by Never purchases again I used this sealer followed the instructions put two heavy coats . With in 2 months it started to pill off I have flag stone drive way that i used it on. I would not recommend it . Yes it looks nice for a month or two but it pills right off after that. July 6, 2014
Rated 1.0 out of 5.0 by Do not buy!!! This product will ruin your patio. Turns it a pasty white. Home Depot should take it off its shelves. Stay away!! May 25, 2015
Rated 1.0 out of 5.0 by White spots I aplied 1/2 galon on 320 sqft verry thin coat and this is second day still white spots May 20, 2015
  • 2015-09-01T11:32:57.739-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_28, tr_28
  • loc_en_US, sid_202263928, prod, sort_default
2 >>