0082474100226

BEHR Premium Plus

Model # 100202

Internet # 100146924

Store SKU # 212447

2 gal. Sand Finish Flat Interior Texture Paint

FREQUENTLY BOUGHT TOGETHER

PRODUCT OVERVIEW

Model # 100202

Internet # 100146924

Store SKU # 212447

Great for hiding surface imperfections, the BEHR Premium Plus 2 gal. Flat Sand Finish Interior Texture Paint is designed for application on indoor walls, trim and ceilings. This durable, interwoven-fiber paint can be used on new and properly-prepared surfaces. It provides coverage for up to 100 sq. ft.

California residents: see  Proposition 65 information

  • Suitable for use on interior surfaces
  • For application with brushes, rollers or sprays
  • Water-based formula is reinforced with interwoven fibers for durability
  • Sand finish with a flat sheen helps to hide surface imperfections
  • 1-container covers up to 100 sq. ft.
  • Cleans with soap and water for your convenience
  • Actual paint colors may vary from on-screen and printer representations
  • Online Price includes Paint Care fee in the following states: CA, CO, CT, MN, OR, RI, VT

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

SPECIFICATIONS

Dimensions
Container Size 
2 GA-Gallon 
Coverage Area (sq. ft.) 
100 
Details
Color Family 
Whites 
Color/Finish 
White 
Dry to touch (min.) 
240.0 
Interior/ Exterior Paint 
Interior Paint 
Minimum Temperature for Use (F) 
50 
Paint & Primer in One 
No 
Paint/Stain Clean Up 
Soap & Water 
Paint/Stain Key Features 
Primer Required 
RGB Value 
144:106:073 
Returnable 
Non-Returnable 
Sheen 
Flat/Matte 
Time before recoating (hours) 
48.0 
Tint Base 
Base 1 
Transparency 
Solid 
Warranty / Certifications
Manufacturer Warranty 
Limited Warranty 

MORE PRODUCTS WITH THESE FEATURES

Interior/ Exterior Paint: Interior Paint
Color Family: Whites
Brand: BEHR Premium Plus
Sheen: Flat/Matte
Review Rating: 3 & Up
Search
9 Questions18 Answers

Customer Questions & Answers

2 gal. Sand Finish Flat Interior Texture Paint
2 gal. Sand Finish Flat Interior Texture Paint

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
3 answers

I have a hunter green wall that I want to cover. Would you recommend a coat of primer first? If so, what type/color? My wall is painted paneling.

This question is from 2 gal. Sand Finish Flat Interior Texture Paint
Asked by
Hali
Hampton Roads, VA
April 22, 2012
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Wash State
Read all my Q&A
November 25, 2012
Answer: 
You can buy paint that has primer in it. I'm not sure I would use this product at all. I'd probably use a spray on texture vs. this. It is very thick and dries very fast and is clumpy and very hard to work with. .
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Grove Oak, AL, USA
Read all my Q&A
June 20, 2012
Answer: 
Yes, I would prime first.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
April 23, 2012
Answer: 
Hi Hali,
It depends.
For proper adhesion to the wall, Texture Paint should be applied over primed surfaces or on surfaces previously painted with a low sheen product. If your hunter green wall is a high sheen, such as semi-gloss, it is recommended that you prime the surface first.
To texture your wall with Texture Paint you will first prime the wall if needed for adhesion, next apply at least two Read More
Hi Hali,
It depends.
For proper adhesion to the wall, Texture Paint should be applied over primed surfaces or on surfaces previously painted with a low sheen product. If your hunter green wall is a high sheen, such as semi-gloss, it is recommended that you prime the surface first.
To texture your wall with Texture Paint you will first prime the wall if needed for adhesion, next apply at least two coats of Texture Paint to impart the texture feel on the wall and then last, topcoat with a coat of Behr Premium Plus Paint or Behr Premium Plus Paint and Primer in One.
Thanks for your inquiry! Read Less
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0
 
3 answers

Do you have a 'tester sample' of BEHR Ultra 8 oz. White Testured Sand Ceiling Paint

This question is from 2 gal. Sand Finish Flat Interior Texture Paint
Asked by
Anonymous
January 4, 2012
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Wash State
Read all my Q&A
November 25, 2012
Answer: 
Not that I know of. This product will drive you crazy! :( Get the kind that is like sand that you mix in with your paint.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
ny
Read all my Q&A
February 7, 2012
Answer: 
Behr doesn't have test samples of this paint, however, they have little samples of what it would look like in the store. the sand textured paint is exactly what it would look like if you were to spackle it on with a trowel or if you were to roll it on with a regular roller. hope this helps.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Read all my Q&A
January 4, 2012
Answer: 
Hi Dano,
BEHR Sand Texture is not available in 8 oz. sample jars. If you would like to see the texture of this product, most stores have a sample hung on the shelf near the two gallon pails. The sample includes Sand Texture, Smooth Texture and Popcorn Ceiling Texture.
Thanks for the inquiry!
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0
 
2 answers

what is the best way to remove sand paint from the ceiling

This question is from 2 gal. Sand Finish Flat Interior Texture Paint
Asked by
saratoga NY
Read all my Q&A
January 21, 2014
I need to remove some of the sand paint so I can retape the sheet rock. I will reapply the sand paint and repaint the entire ceiling
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
January 22, 2014
Answer: 
Dear birb,
Thank you very much for your question. As stated in a previous answer by Home Depot, sanding is a very good way to remove the older sand texture paint. Sanding will be able to remove the paint, leaving behind a smooth drywall surface for re-taping.
Given a sand texture paint is usually a very thick paint film, another alternative is to remove the older excess paint with putty knife. Read More
Dear birb,
Thank you very much for your question. As stated in a previous answer by Home Depot, sanding is a very good way to remove the older sand texture paint. Sanding will be able to remove the paint, leaving behind a smooth drywall surface for re-taping.
Given a sand texture paint is usually a very thick paint film, another alternative is to remove the older excess paint with putty knife. Scrapping the texture paint off the drywall may be less messy and eliminate a lot of unwanted sanding dust. Ultimately, you may need a combination of scrapping and sanding to complete the project.
If you do scrap or sand, for your safety please be sure to wear the proper respiratory and safety equipment. The back label of BEHR PREMIUM PLUS® Sand Texture Paint will have proper safety recommendations for sanding or scrapping. Thank you. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

January 22, 2014
Answer: 
Hello Birb,
The best way to remove the sand texture is to sand it off. It will cause lots of dust, so be sure to cover furniture and the floors. We sell a manual sander that can be attached to an extension pole (link below). That will make it easier to sand!
http://www.homedepot.com/p/Wal-Board-Tools-3-1-4-in-x-9-1-4-in-Pole-Sander-Head-88-005/100392838
- Christine
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
2 answers

will this product hide the seams on paneling

This question is from 2 gal. Sand Finish Flat Interior Texture Paint
Asked by
keith
duluth mn
August 25, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
August 26, 2013
Answer: 
Dear Keith,
The answer to your question depends on how wide the seams are. If the seams are narrow, you might be able to fill the seams with sand finish texture paint (more of a patching application) and allow it to dry before you paint the entire panel. If this is the traditional paneling with seams every 5 inches or so, then you might want to consider filling the seams with a joint compound first Read More
Dear Keith,
The answer to your question depends on how wide the seams are. If the seams are narrow, you might be able to fill the seams with sand finish texture paint (more of a patching application) and allow it to dry before you paint the entire panel. If this is the traditional paneling with seams every 5 inches or so, then you might want to consider filling the seams with a joint compound first before painting with the sand finish.
Thank you for your inquiry. Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Cypress, CA, USA
Read all my Q&A
August 26, 2013
Answer: 
I do not think so, not on most paneling any ways.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-06-25 T14:37:52.533-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100146924, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 117ms
  • QUESTIONS, PRODUCT

CUSTOMER REVIEWS

Rated 3.5 out of 5 by 44 reviewers.
Rated 3.0 out of 5.0 by Sand paint Ok so it works but it flys every we're.i used a brush and did one brush stroke at a time then blended it in ..it's very SLOW and messy .take your time and work the sand to blend it together so you don't see brush marks ...and good luck October 28, 2012
Rated 5.0 out of 5.0 by Looks Good I used this product to do a mud swirl finish, it looks great and hid all the imperfections in my 100 year old ceiling. It is slow going and messy but it is way easier and less messy than spraying with a hopper. Make sure you use the looped roller cover as outlined on the instructions. Also make sure the surface you are applying to is consistent (preferably white), this product doesn't hide color differences very well. I only gave good value because this product seems like it is mostly drywall mud which is fairly inexpensive compared to the price of this product. November 10, 2014
Rated 5.0 out of 5.0 by BEAUTIFUL RESULTS! I'm not sure what people expect when they complain about the mess, of course you will get a little dirty, but it cleans up super easy and the results are well worth it!! I'm a woman with zero experience with textured paint and it was simple once I got the technique down. When they say do the "W" pattern, do it to avoid roller pad patterns. Also, do the 3' sections at a time because the second coat dries extremely fast, especially if you're going for the knock down look. And I did see where they said to use a primer first. Research first people!! Apply thick and roll slowly to avoid excessive splatter. TA-DA!! Stunning. I have now decided to head into the hallway and down to the kitchen. I absolutely love it. May 29, 2013
Rated 5.0 out of 5.0 by Great with Whisk Broom application After Hurricane Katrina, we opened our attic to make a loft. There are plenty of angles up there that need to be hidden, so we went with this paint. You should mix with a giant mixer on the end of your drill. Makes application much smoother. Also, after applying a small area, I would dip a small straw whisk boom into water, and drag it down the wall for a more textured look in hiding those imperfections. Voila! Beautiful!! Now I am trying to figure out if I can add color to the paint, so I can kill two birds with one stone. See photo below for my previous application. July 3, 2011
Rated 4.0 out of 5.0 by Works great I did an entire house with this product, walls and ceilings. It worked out great. I did a few trials in a closet and settled on a thinned version with water. I used a cordless drill and a mixer to keep the sand suspended. I rolled the entire house. It went really quick and couldn't see any roller marks. It does make a sandy mess during the application process, but any texture does that unless you brush or trowel something on. This product is thick, consider thinning it with water to make it more workable. January 24, 2014
Rated 1.0 out of 5.0 by Worst stuff ever! This is the worst product I've ever used! 6 months of work down the drain in less than 2 hours of using this product. September 21, 2014
Rated 1.0 out of 5.0 by awful stuff, waste of time and money I had a pretty big ceiling patch to make after removing a big recessed light. I opted for this product over the aerosol cans that do not go very far, or having to deal with the mess of a hopper gun. What a waste of time and money. The only thing i accomplished was to become completely frustrated. I followed the vauge instuctions, mixed it well, and primed first.The problem was that it does not stick to the roller. I tried all different naps, but only had the same results. It seems that if you were able to get paint on the roller, it just pushes into it when you roll it. Don't waste your time with this stuff. I just hope I can get my money back! April 7, 2010
Rated 1.0 out of 5.0 by intructions for paneling I bought this paint to cover up some ugly paneling because of what this product advertised by the picture. You just paint it on and it covers up the grooves on the paneling. Not the case at all. It only made my walls look even uglier. It would've looked better if I would've just painted over the paneling. I was trying to avoid that look, but know I have that look and worse and I can do nothing about it unless I tear it all out and drywall. The paint didn't spread evenly at all. The texture would be heavy for about 12inches long and the width of the roller, than it would weaken greatly. Huge waste of time and money and big time mess. Unfortunately Behr can't replace my walls. Live and learn. This product may work better on a different type of surface, but not on paneling. January 15, 2012
  • 2016-06-25 T17:02:44.649-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_44, tr_44
  • loc_en_US, sid_100146924, prod, sort_default
2 3 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 55ms
  • REVIEWS, PRODUCT