Rated 4.1 out of 5 by 743
Rated 4.0 out of 5.0 by Dads2vette Great Paint poor sq footage coverage
Love the coverage on a new wall. Easy application and one coat coverage. I have used hundreds of gallons of Behr paints and will continue to but there was a problem with this paint. I have no idea why and plan on contacting Behr and HD about this but the coverage I got for the paint I bought was nowhere near what the information said. It's suppose to cover 400 square feet and I covered about 260. That's 65% of quoted amount. I've never run into this problem before and that is why I gave it a poor value rating. It was applied to a textured wall but I have done that before without using this much product.
June 17, 2016
Rated 2.0 out of 5.0 by Ricardo Multiple Coats for Ulra Pure White
I have had good success with the Behr paints, and rarely have had to apply a second coat for any color. Until now. The Ultra Pure White was applied to a bright white wall, but absolutely needed a second coat. Had I known this, I would have upgraded to the Marquee. BUT, read the fine print and see that even the Ultra Pure White in the Marquee label also requires more than one coat, even though it is represented as a one coat paint. Accept that you will have to apply two or more coats for Ultra Pure White. No need to spend the additional 50% for the Marquee when a second coat will be necessary. I am going to shop around for a one coat ultra pure white from other manufacturers to see if there is a satisfactory one coat product available.
August 19, 2016
Rated 1.0 out of 5.0 by Chria the worst
Used white fot trims and doors. Save yourself time and money and get benjamin moore.
September 15, 2016
Rated 1.0 out of 5.0 by Tim Terrible for bathrooms
We tried this product for our master bath renovation because we were curious about a new brand (typically, we use Sherwin Williams or Valspar) and there was a $5 rebate on Behr making it much cheaper than either of the aforementioned paints. I will never buy Behr again for any house of mine, if I can help it. After two coats of a cream color paint over Amber walls, the old color is still evident underneath showing through as dark streaks. After peeling off the edging tape, the Behr peeled off in large chunks with it. I could excuse the paint as being poor in humid conditions, but the coverage is so bad. I will gladly choose Valspar any day for a few dollars more for a true overcoat paint.
July 21, 2016
Rated 1.0 out of 5.0 by Lou1958 Junk
I have tried each level of Behr paint including the premium ultra and I am on my 4th coat and will need a 5th. I laugh every time I see the commercial where the girlfriend calls and says she is on her way and the guy paints the room before she gets there. I always used Benjamin Moore in the past but thought I would give Behr a shot but I am going back to the other paint. I find Behr just does not cover! It is suppose to be an all in one paint but guess what, when you are on your 5th coat there is a problem. I am painting over a light aqua color. I also had the same issue painting over my medium brown stained woodwork and it chips off very easy! I sanded and used Zin primer first and it is still chipping and I just did it, and I live alone so not like any one is being rough with it! And yes I let it cure before adding a second coat. I waited a few days and in one room waited a week and it still chipped! It is easy to clean, so hence the 1 star.
July 31, 2016
Rated 5.0 out of 5.0 by JPN80 Silver Screen 770E-2: Painted cabinets without primer with excellent results
I was curious to find if the paint job would last if I didn't paint the builder-grade honey oak cabinets with primer first as recommended by various bloggers, tv personalities, and tradesmen. Since this cabinet was in the laundry room I figured I give it a shot; if it didn't work, then I could always distress it .
Paint Application: I followed Behr's instructions on how to paint a cabinet (http://www.behr.com/consumer/how-to/interior/how-to-paint-a-cabinet) using just the PPU Interior Semi-gloss paint in Silver Screen 770E-2. In total, I applied 3 thin coats of paint to the cabinet, allowing each coat to dry at least an 1 hr in between; if I applied too much, I made sure to spread it out as evenly as could with 1" Wooster brush before it started setting in. However, I didn't manipulate the paint too much either when applying it to the cabinet; I know from past experiences if it's manipulated too much, the paint will start "bunching up" - just like when kneading bread, don't overwork it. I also used one of the bigger Crayola paint brushes in the 5pc or 6pc sets (sold at retail stores) for the stiles and the opening and to touch-up sections as needed. I was surprised that the graining pattern was still visible because sometimes paint and primer combos fill-in the graining - so this was a major plus since I like the graining but not the honey oak color.
Paint Smell, Dry time: The paint barely had a smell and I believe this might be attributed to the base; the other colors (i.e. Behr's French Silver, Ethiopia, Russian Blue) used in different applications were darker, used either a medium or deep base, and had a stronger scent - not as strong as oil-based paint but definitely noticeable. In addition, this paint seemed to dry faster than the medium and darker paints as well.
Paint Cleanup: Just soap and water :)
Overall, I'm really pleased the cabinet has turned out well; this paint helped reduced steps (i.e. additional primer coats), dried within a reasonable amount of time, and the cabinets don't feel tacky to the touch either. Can't wait to tackle powder room cabinets in Behr Thermal S440-7 and kitchen cabinets in Behr Frost 57.
October 12, 2015
Rated 3.0 out of 5.0 by BobTheBuilder Multiple Coats
I recently painted two brand new french doors (not pre primed). After two coats you could still see through the paint in areas. I am not sure if it was due to the fact the doors were brand new or if was truly a paint issue. I also used it on pre-primed trim and it covered fine. The paint seemed to cover well on anything that is pre-primed. I have a cabinet to paint that is unprimed. I expect it to take two coats. It will be interesting to see how well if covers. It took a gallon to paint all my trim. However, I am headed back to purchase another gallon to complete the job this weekend.
January 30, 2015
Rated 1.0 out of 5.0 by SASLLC poor coverage
Required more than 2 coats on prior white surface and still can see streaks.
May 13, 2016