Model # 86036

Internet #202529859

Store SKU #865533

BEHR Premium Tuscan Stone Concrete Dye Kit

BEHR Premium

Tuscan Stone Concrete Dye Kit

Frequently Bought Together

Product Overview

A unique decorative finish that adds depth and warmth to any home by transforming ordinary concrete into an elegantly beautiful and luxurious floor resembling a natural, marble stone finish. The BEHR Premiumim Concrete Dye Decorative Floor Finish is packaged in an all-inclusive kit that covers up to 250 sq. ft. This complete project kit will provide homeowners an easy to use acid free concrete dye finish for their interior/exterior concrete surfaces.

California residents: see   Proposition 65 information

  • Water-based acid free interior/exterior concrete dye
  • Complete project kit that covers up to 250 sq. ft.
  • Includes the BEHR PremiumTM Wet-Look Sealer to protect and enhance the look of the concrete dye finish
  • Ideal for patios, porches, pavers, walkways, kitchens, bedrooms and other concrete floors
  • Actual paint colors may vary from on-screen and printer representations
  • Online Price includes Paint Care fee in the following states: CA, CO, CT, MN, OR, RI, VT

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Not satisfied with the results of the Behr Concrete dye kit in (Tuscan Stone) How to Fix??

We followed the instructions in full. Took two weeks to properly clean prep & etch our indoor concrete. Our concret was in great condition but had to use a ton of time to clean & prep.Due to tons of paint and plaster on outer edges by the walls. Application of the base coat went well. After first coat dried completley we noticed that the result was very spotted. After it dried completley we added a second coat of the base and it looked much better but still had spots. After that dried we perceded to the accent color.We were a little cncerned when pouring into the sprayer because the color looked more black then walnut. We figured since it was transparent it would dry lighter....No such luck : ( Its verry dark & not complimenting the base coat at all! Its very spotty and in some places looks like car oil stains. This was done in my living room and hallway. Any suggestion how to fix? My husband thought maybe if we go over it with sand stone color with a sponge that it may lighten the really dark areas.
Asked by: Anonymous
Dear Tamster, Thank you for using our Behr Premium Decorative Concrete Dye. We are sorry to hear about your situation. Before we recommend a solution, we us provide our assessment and why the finish result in that manner. Interior concrete is commonly more dense and smooth finished. Unlike exterior concrete that is more porous and broom finished. Interior concrete is often sealed to help protect against moisture, treated with adhesives/glues for carpeting and sometimes coatings from the initial build of the home. All these factors make interior concrete a little more challenging for Decorative Concrete Dye to penetrate into the surface, which is essential for the right finish. The "spotted" areas you are referring to are pockets of concrete that is less porous or slightly sealed underneath. It is spotted because the Concrete Dye pooled in those areas. Your husband's suggestion to add a lighter toned color over the dark spotted areas may only darken those areas more. We will provide you a few options to help remedy your situation. Option 1 (Strip Spotted Areas) If you would like to strip out the dark spotted areas, you can use the Behr Premium Paint Stripper. Just apply a small amount of Paint Stripper on to the dark spotted areas. When the Paint Stripper coating wrinkles, carefully scrape off. Some areas my require more than one treatment. Please caution this option may affect the surrounding light toned concrete dyed areas as well. Also you may left scrape marks on the surface. Option 2 (Coat over with Solid Color Concrete Stain) If you would like to coat over the entire area and achieve even solid color look, use the Behr Premium Solid Color Concrete Stain. First lightly scuff sand the surface to provide a light medium grit texture. Then apply the Solid Color Concrete Stain to the entire area. Please caution this option will completely cover the Concrete Dye and will result to an even opaque finish. Option 3 (Light etch) If you have not sealed the surface, one option you can consider is to light etch the surface to remove the Concrete Dye. Dilute the Behr Premium NO. 991 Cleaner & Etcher ( 5 parts water to 1 part Cleaner & Etcher) and lightly apply on the dark spotted areas. Quickly rinse the Cleaner & Etcher off the treated area. This treatment will light etch and remove some of the Concrete Dye. Next lightly sponge on the Concrete Dye to the treated areas. Please wear acid resistant gloves, boots, goggles and have good ventilation when handling the Cleaner & Etcher. Please note if the surface is sealed with the Behr Premium Wet-Look Sealer, the Cleaner & Etcher not affect sealed areas. If you want to protect and not discolor certain areas, seal those areas first before treating the adjacent areas with the Cleaner & Etcher.
Answered by: Behr
Date published: 2016-02-18

Can this product be used on concrete walls?

I have very rough looking poured concrete walls in my basement. I think the concrete forms were breaking down when they did my basement and there's even some wood from the forms embedded into the walls. I'm ok with the basement looking rustic, but wondered if i could dress it up a bit by applying this process to the walls? And if yes, are there special differences in application that you would recommend? For example, do you think i even need to use the etch, given that the walls are already pretty rough? Do i have to use the finishing product, or is it ok to leave this unfinished, since no one will walk on it? (I might still want to, just asking if a "must".) And are there any extra precautions i should take, given that the application is higher up like this (due to splashing etc)? Thanks
Asked by: jab110
Thank you for your interest in Behr Premium Decorative Concrete Dye Kit. Our product is recommended for use on floors or horizontal surfaces only as this water based dye is thin and may drip on vertical surfaces. However, please consider our other Behr branded line of paints (like BEHR PREMIUM PLUS ULTRA® or BEHR MARQUEE®) for your concrete walls. Hope this helps and best of luck on your project!
Answered by: Behr
Date published: 2015-09-20

our concrete has stain and paint impregnated into it from when the house was built, will this work for it

Asked by: Anonymous
I don't think so. The first coat you have to apply is too "light" and would not cover the "affected" areas (if I may put it like that). Those areas with paint would still show (it happened to me on certain areas. What I would do is this: 1. Try a matte concrete paint which is about the same color or clearer than the first coat provided in the kit. You'll apply that paint to basically paint the floor and cover the "affected areas". 2. Then apply the base coat of that kit BEFORE the paint you applied on #1 dries. Let it dry a couple of hours.(you should have a nice mixed finish) 2. Spray sporadically the second coat (Accent Paint) 3. Buy the "Rust-Oleum EpoxyShield 1-gal. Clear High-Gloss Premium Clear Floor Coating Kit" to seal it. Then you should be good. Do not use the sealant provided in that kit. It is garbage! Denis
Answered by: Denis
Date published: 2016-06-22

Do you have to use etcher with the dye? You can't just use the dye?

Asked by: Anonymous
I did use the dye directly without using the etcher (For out door walk-way), however, instead of using the etcher... I pressure cleaned before, and used chlorine to clean the cement...
Answered by: Denis
Date published: 2015-09-17
  • y_2017, m_5, d_25, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_54
  • loc_, sid_202529859, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 93ms

Customer Reviews

Tuscan Stone Concrete Dye Kit is rated 2.4 out of 5 by 30.
Rated 1 out of 5 by from Don't buy this product! I too have had great dissatisfaction with my Behr Concrete floor stain project. I was extremely careful to follow all the prep. steps and stain. I watched numerous how to videos as well. My first problem came when the colors didn't proved to be true as shown. That was a frustrating disaster I had to work my way out out to come up with a look I could live with. Now that all is done and we are using the space as a home gym/office (not heavy duty wear and tear at all) The stain is chipping off the floor. I see no way to fix anything. We will either have to flat out paint the floor someday or cover it with something. DO NOT BUY THIS PRODUCT!!!!
Date published: 2016-09-10
Rated 1 out of 5 by from Behr Concrete Dye We used this product to finish our basement floor (approx 700 sq ft) after multiple cleanings of the concrete including sanding with a professional sander. Immediately after completion, the dye (which is more like a layer of paint) started to chip and has continued to chip at each and every use of the basement gaming area. We continue to make regular repairs despite ongoing chips. The dye never adhered to the concrete. Very disappointed in the product. DO NOT RECOMMEND!
Date published: 2016-07-11
Rated 1 out of 5 by from DO NOT USE THIS PRODUCT! What a nightmare! We used this product to dye the floors in our new co... DO NOT USE THIS PRODUCT! What a nightmare! We used this product to dye the floors in our new construction home. It was a new slab so we were told that we could put the product directly on the clean floor without stripping the concrete. We followed directions on the brochure (and followed advice given by Home Depot employee). The floors were sealed using the recommended wet look sealer. Within days the color has started flaking off. The dye does not penetrate the surface. It simply sits on top of the concrete waiting to flake/scratch/chip off. I bought and applied some super duper industrial flooring wax and am praying that that will keep it from getting much worse.
Date published: 2017-02-21
Rated 5 out of 5 by from Back Patio Stain Worked Great! We have a large patio with very old concrete with lots of stains. We pressure washed, degreased and etched before staining and knew there would be a lot of 'character' when complete. We were a little worried because the colors in the can were really watery and didn't closely match the color card but we followed the directions exactly and love the final result! [This review was collected as part of a promotion.]
Date published: 2016-06-11
Rated 5 out of 5 by from LOVE IT!!!!! Stained almost our entire basement floor! Loved it ! turned out just like the picture on the brochure! We watched the how to videos and followed the directions! VERY SATISFIED!!!! [This review was collected as part of a promotion.]
Date published: 2017-04-26
Rated 5 out of 5 by from Living Room Floor Stained my living room floors. The directions were very easy to read. Also, when I had questions I called the number on the can and they were very pleasant and helpful. My floors turned out just as I had hoped. Beautiful!!!! Everyone that comes in my home comments on the floors. I have and would recommend this product. [This review was collected as part of a promotion.]
Date published: 2016-02-10
Rated 5 out of 5 by from This product was so easy to use and looks great We purchased the Desert Oasis. The tone is much less red than the Tuscan stone, which went better with our colors in the room. However, it stained very dark, which may be due to our concrete. We still love it and are amazed at how it transformed our room. We loved that this comes in a kit and had everything we needed. OUr room was slightly bigger than the recommended size (ours is about 350 sq ft) but there was just enough dye in the kit. The video directions were also very detailed and helpful with many suggestions. All in all, it's a great product and would highly recommend it!
Date published: 2012-03-22
Rated 1 out of 5 by from I would not recommend I would not recommend this product. I followed the directions and steps for prep and application exactly. My concrete patio looked amazing when finished. It was so beautiful. An the places that have stayed in tact are still beautiful. However, this product peels up in little spots here and there leaving white spots on the patio. You have to be very careful not to scrape it with a chair, so I put felt feet on all my patio furniture. But still in random spots it will just peels up for no reason - no traffic, no furniture, nothing to make it peel. The smallest spot is just a spec size but the largest is a couple of inches across. This was a very expensive project since I dyed about 900 square feet of patio. I just hope I can somehow repair the areas that have peeled. [This review was collected as part of a promotion.]
Date published: 2015-02-14
  • y_2017, m_5, d_24, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_30
  • loc_, sid_202529859, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 85ms