Rated 4.3 out of 5 by 121
Rated 5.0 out of 5.0 by Kanzan Great Idea for Toilet Seat
Lift-off never loosens toilet seat is a great idea for ease of cleaning the top of the toilet. Installation takes less than 5 minutes. Instructions state to use a wrench and a rachet/socket; but only need to hand tighten the elongated nut that fits beneath and use a standard blade screw driver to finish for a snug fit. Just simply remove the old seat, install the lift-off nuts, lift the tabs on the nut covers and snap the seat in place, then press shut the top taps . When needing to remove the seat, just lift up the top taps and lift off the toilet seat.
July 20, 2016
Rated 4.0 out of 5.0 by oldVermonter excellent finish, ingenious mounting system - - but little seat screws may be hard to keep clean
The first thing I noticed is the finish on the wood: excellent, solid high-gloss enamel. It looks like it will last a long time, and be easy to clean. And it feels really solid when you sit on it - the seat doesn't flex a bit, and it doesn't move from side to side.
The mounting system is very clever. The seat separates completely, for easy clean-up. The mount is held firmly in position by a set of little fins (that disappear once installed) and a plastic nut (that disappears under the bowl - - the top part snaps off when you reach the correct torque). Once the mount is installed, you can snap the bowl off and on easily any time you want.
Once mounted, the hinges are covered by oversize caps - - they won't show grunge, but may collect it underneath.
The only thing I didn't like is the exposed small screws that hold the hinge to the seat, facing the user when the seat is up. I'm afraid this is a guaranteed grunge magnet - - and I don't know how to easily keep it clean.
August 8, 2016
Rated 4.0 out of 5.0 by Brian Nice design. The toilet seat pops off for cleaning
This toilet seat was very easy to install using my 1/2 inch nut driver once I figured out the instructions. You will need a pair of pliers if you do not have a 1/2 inch socket, end wrench or nut driver. The instructions are clear if you read them twice and follow them once! The reason I gave "ease of installation" a 4 -good- rating is because the illustrations are so small it was hard for me to tell which end was up but most people probably wouldn't have that problem. Regarding quality, somewhere between opening the package and installing the toilet seat I scratched the paint a tiny bit. I honestly do not know if it came that way with a minor defect or if it was my fault. In any case, the paint must be pretty thin so I gave it a 4 -good- rating for "quality". The really nice thing about the seat is that it really does pop right off so you can easily clean the whole top rim of the toilet. Really nice-especially if you have boys :). Also, the directions tell you to tighten the bolts from underneath until the nut on the bottom pops off but I did not do that. I chose to leave it on because I think it will make removal easier when that time comes. I could be wrong so look at the fasteners and decide for yourself.
July 22, 2016
Rated 5.0 out of 5.0 by skaizun Easy install; great price; comfortable
The Bemis round toilet seat was easy to install. It took less than 5 minutes for this DIYer to remove the old seat and install this new one. All I needed was a large, flat-blade, screwdriver and an open-jaw wrench (n.b., there are NO instructions, but it should be intuitive for most people). It fits snugly on its seat bolts (no wiggling!), and is easy to remove for cleaning the bottom and back of the seat, as well as the top surface of the toilet bowl, where dust and dirt can collect. I found it to be more comfortable than the old, plastic, one, of which the paint was coming off at an embarrassing spot! It should be noted that this is NOT a "slow-close" seat, but, given its low price, as long as you don't mind a bit of noise if someone drops the lid, then this is the seat for you!
June 28, 2016
Rated 5.0 out of 5.0 by EDDIE This only works with a round toilet.
This toilet seat cover works great. Very easy to install within a 4 to 5 minute mounting session. My wife and I really happy with the install and cleaning. I already had the wrong seat cover and now we have the exact size to the toilet. This Bemis brand makes it super wonderful to use when it's the exact size. My wife says it's super easy to clean and wow. I'm a happy camper.
June 24, 2016
Rated 4.0 out of 5.0 by eve great and easy to instal !!
October 29, 2016
Rated 5.0 out of 5.0 by Spook89 This is the most durable toilet seat I've come across. Very sturdy and comfortable.
October 25, 2016
Rated 5.0 out of 5.0 by Peter Great Value
Had to run out at last minute and get a new seat as we were having a party. This seat is a great value and installs very easily.
October 19, 2016