Rated 3.9 out of 5Â by 32
Rated 4.0 out of 5.0Â by Elbyron STA-TITE fasteners can be a bad thing too
The design of the fasteners that bolt the seat onto the bowl are quite unique: they have a typical metal bolt set into a plastic "plug" that has little tabs in all four directions that can bend, so that it snugly fits into the hole in the toilet bowl. This prevents it from slipping around as much if the bolt loosens. But it also poses a problem when the holes drilled into your toilet bowl are not aligned very well, as you don't have very much "play" to try and center the seat. For each of my 3 Briggs toilets, snapping off the plastic tabs wasn't enough, I actually had to cut away the plastic surrounding the bolt on one side, on each of the bolts, so that it could twist far enough for the seat to be centered.
The soft-close feature also works a little too well, closing the lid so slowly that it's still 1/4 open when you would typically flush, allowing some splash-out to occur (small droplets that you don't usually see, but can leave splatter the wall). At least the seat is comfortable and looks nice!
June 25, 2013
Rated 4.0 out of 5.0Â by iluvmyGSD Great toilet seat
This seat is for our mudroom round toilet. The seat is thick and comfortable and my 200lb husband can sit on the closed lid without it buckling under him. The hinges are rectangular in shape and different than the shape pictured. The rectangle shape is easier to clean so I like what I got. No screws show on the hinges. The white matches well with our white kohler toilet. Pretty easy to install, but the directions were necessary.
My only complaint is that the seat opening seems a bit small. We sit on it OK and it's not actually too small for our bottoms, but it would have been nice to have little larger opening. Regardless, I would buy it over again and do not regret my purchase.
Very nice quality and the soft close feature works great.
May 17, 2014
Rated 4.0 out of 5.0Â by MsBRM Safety First!
I thought I was ordering additional slow close toilet seats with the chrome detail, but did not notice that this one had a nickel finish. It met my expectations, so I kept it anyway. I replaced all of the toilet seats in the house with slow close toilet seats to safeguard the family jewels of my newly potty-trained, but now transitioning to the toilet bowl grandsons. They just barely reach the edge of the toilet bowl. How tragic if the toilet seat ever slams down.
January 8, 2015
Rated 5.0 out of 5.0Â by Kimbrulea Buying another for powder room
We purchased this for our master bath since it was less expensive than the brand made in WI and knew no one would see it. We purchased the WI brand for our main floor powder room and it is time for a new one for the this bathroom and we're getting this Bemis model. It cleans easily and hasn't stained at all. The slow closing mechanism is still working perfectly after 5 yrs of daily use.
September 23, 2012
Rated 1.0 out of 5.0Â by SayItAintSo No "slow close" whatsoever and I just bought it.
I saw the slow close feature for this seat at the store, so I excitedly bought it. Imagine the HUGE disappointment after the exercise of trying to figure out how to install it and finally succeeding, only to find out the slow close feature doesn't even work! Ugh! It slams just as loudly as any other cheap toilet seat so why bother paying the extra money. I agree with some of the other reviewers on the installation. The bolts are one sided and too long with regard to where the holes for the screw are. There is no room for a full rotation of the bolt. The long one-sided bolt hits the toilet and won't turn. I ended up having to hold the bolt while twisting in the screw tightly. Then came the part of trying to get the caps to lock over the screws. It took a lot of tries to get it to lock. After all that effort, now I have to go return the darn thing because it's ridiculous to pay for a feature that is dead on arrival.
November 15, 2014