Rated 3.2 out of 5 by 22
Rated 1.0 out of 5.0 by MArch Two years
This toilet seat broke after 2 years of normal use. The soft close mechanism seems to have froze. I did not realize it was frozen until the hinge broke free from the frozen pin mechanism. Now the lid won't stay open. The toilet seat is now garbage. I've never seen a toilet seat break after such a small period of time. I will not be purchasing a Bemis seat again.
January 10, 2016
Rated 2.0 out of 5.0 by JohninROC Slooowwww Close
I purchased this seat for the price and slow close feature as I have one with slow close on another toilet in our house and like it. However this one is more like a VERY VERY SLOW close. It seems to take forever for the seat to close. I guess I should have spent more and gone with the same brand I have in the other bathroom.
January 20, 2016
Rated 2.0 out of 5.0 by dd86 Broke in less than a year.
We bought 3 of these and 2 have already broken after a year of normal use. The 3rd one didn't break because that bathroom is a guest bathroom. Both broke at the hinge. I suggest you spend a little more for a higher quality seat.
January 18, 2016
Rated 3.0 out of 5.0 by Reds Fastener is way over designed
The price and function are fine but the installation is asinine. What should take 2 minutes with a bolt and wing nut takes 15 minutes with multiple pieces. Talk of "the right torque" is rediculous - it's a toilet seat for Pete's sake.
December 20, 2015
Rated 1.0 out of 5.0 by medfordhomeowner Can't use disinfectant cleaner?
I purchased 2 from the store. When I opened the package, there was a printed slip of paper inside saying that it can only be cleaned with mild soapy water, and to avoid detergents, disinfectants and aerosol cleaners. The package says nothing about care instructions on the outside, and I believe that disinfecting is important for a toilet seat. I am annoyed that I have to spend time going back to return this item.
October 6, 2015
Rated 5.0 out of 5.0 by CHUCKNORRIS Great fit and function for the price!
For under twenty bucks I was able to replace the cheap plastic seat that came with my Koehler toilet. This seat although cheap in price seems better than the OEM seat for my toilet; the finish is glossy, the color is nice and bright and it sits very well atop my throne. Installation was very easy - basically you tighten these bolts until the bottom breaks off, that's the way they're engineered to tell you that they're perfectly torqued. I was able to remove the old seat, clean the toilet and have the new seat on in less than 15 mins. Those that complain that the seat is cheap must be expecting something made of solid gold for twenty bucks, common sense says that if you want fancy you better pay for fancy, otherwise this is a very serviceable seat. I don't agree that it is flimsy, I am 260 lbs and the seat doesn't move around or flex when I sit on it. The only way this seat would have any give is if it was incorrectly installed. Yes this seat comes with a warning label not to use abrasives or disinfectants, but this does not mean you cannot disinfect your toilet. It means you need to exercise a bit of common sense to employ cleaners that are not going to damage the finish, dull the color or compromise the materials. This seat is glossy and I can imagine that if it is scrubbed with abrasives that the seat would get dull and scratched up. I can also imagine that certain chemicals eat, deteriorate or soften the plastic material causing premature failure. I have been using Pine-Sol, Fabuloso, Lysol, Comet, Ajax and have not come across any issues. I think that those pamphlets are just dummy labels to keep dummies from destroying their seat with inappropriate chemicals. I really like that you can't slam the lids on this model, you just tap it over and it closes.
October 24, 2015
Rated 5.0 out of 5.0 by ruairi Enjoying Quiet and Removal for Cleaning
Thin but not flimsy. Quiet or slow close is great near bedrooms. Removal for cleaning and re-installation worked great.
May 28, 2015
Rated 2.0 out of 5.0 by JinTheLou Cannot disinfect, hinges never tightened, lid needs multiple taps to close
Despite the box proclaiming it would be easy to get it to the perfect tightness, the hinges never tightened fully. The bottom portion of their fancy fasteners is is now stripped, and the seat still wiggles. What happens if you need to remove the seat for some reason? How will it get the right tightness again? Seems like a gimmick, and one that doesn't work very well at that.
When I tapped the seat to close, it went down about an inch - then stopped. Tapped it again. Stuck again. The lid stuck separately from the seat, so you had this weird gap and had to hit them independently.
The biggest down fall involves how you have to clean it. The instructions state to not use disinfectant, no spray cleansers, nothing abrasive, and to only use soap and water and dry with a soft cloth. Think about what can come in contact with this seat, and the bacteria involved. I think making a seat that cannot be disinfected is ridiculous, and downright unsanitary. I purchased it a while ago, and just got around to installing it, or it would go back. I'll be looking for a replacement that can be disinfected.
April 18, 2015