Model # WM225

Internet #202516379

BLACK+DECKER Workmate 225 Portable Project Center and Vise
0028873792259

BLACK+DECKER

Workmate 225 Portable Project Center and Vise

$77.11 /each

Frequently Bought Together

Product Overview

The steel construction can hold up to 450 lbs. The Workmate 225 incorporates an advanced one-handed clamp design. The dual height allows for multiple uses such as a workbench, bench tool stand, vise or sawhorse. This Portable Project Center and Vice folds for easy storage.

  • Sturdy construction holds up to 450 lbs.
  • Adjustable rear jaws give you flexibility to clamp odd shapes
  • Lightweight, portable design folds for easy storage
  • Durable, heavy-gauge steel frame

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

6 Questions5 Answers

Customer Questions & Answers

Workmate 225 Portable Project Center and Vise
Workmate 225 Portable Project Center and Vise

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
2 answers

WORKMATE Swivel Pegs included?

This question is from Workmate 225 Portable Project Center and Vise
Asked by
San Francisco
Read all my Q&A
July 2, 2016
Does the WORKMATE 225 come with (4) WORKMATE Swivel Pegs, or do I have to buy those separately?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Austin, TX
Read all my Q&A
Home Improvement Profile: DIYer
July 9, 2016
Answer: 
Your Workmate should come with 4. But I recommend you get 4 more perhaps from ebay.
Below is a link to a video that shows how to assemble your Workmate.
User submitted video
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

July 5, 2016
Answer: 
They are included.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

how much does the workmate 225 weight

This question is from Workmate 225 Portable Project Center and Vise
Asked by
Nashville tennessee
Read all my Q&A
September 5, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Atlanta, GA
Read all my Q&A
Home Improvement Profile: DIYer
September 25, 2016
Answer: 
According to the Web Site, the weight on this produce is 28 pounds.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

How much can it hold

This question is from Workmate 225 Portable Project Center and Vise
Asked by
Read all my Q&A
July 14, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

July 15, 2016
Answer: 
The vise can be used to hold up to 450 lbs.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
 
1 answer

Are there replacement handles

This question is from Workmate 225 Portable Project Center and Vise
Asked by
Read all my Q&A
April 30, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

June 20, 2016
Answer: 
Vic, thank you for your recent inquiry with The Home Depot. Replacement parts for your Workmate are available by calling 1-800-544-6986. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-10-31 T00:32:06.056-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202516379, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 442ms
  • QUESTIONS, PRODUCT

Customer Reviews

Workmate 225 Portable Project Center and Vise is rated 4.1 out of 5 by 95.
Rated 4 out of 5 by from Great once I found a use for it! There was one of these laying around my mothers house for years, I assume my dad left it there. For years I never saw a practical use for it so it sat in the barn and collected dust and I even contemplated getting rid of it. I should mention that I'm not a woodworker, I build commercial duty trucks by trade. I am very handy in all aspects for the most part and maintain my house and all of my rental units. I had finally decided that my circular saw wasn't enough and that I needed a Miter Saw when I found a great deal on a bright green one I picked it up and I finally found a use for this stand! initially I just drilled some holes in the wood and bolted my miter saw to this stand and figured that would be ok as the saw and stand wouldn't leave my garage often. About 2 weeks later I decided that was not sufficient and I could easily do better and that I didn't want to have to use a wrench to take my saw off. So I looked at the underside of the base on my miter saw, did a little measuring, went about drilling some new holes in the wood and grinding down the plastic tabs a little and about 30 minutes later presto I could securely clamp my miter saw to the stand simply using the hand cranks. Since then it has become indispensable, I use a simple little fold out adjustable height A-frame stand with a roller on top to support longer boards and it works great. I actually prefer this setup to a traditional miter saw stand due to it's compact size, I like how the stand collapses down and the feet fold in making it very compact, this feature came in very important most recently when my truck was out of commission for a few days while I was laying in a laminate floor in one of my rentals and had to have my miter saw there and didn't want to be cutting pieces on the ground! Due to this stands ability to collapse and fold up nice and small I was able to fit it into my car and still have plenty of room for my miter saw and little A-frame stand I use for longer pieces of wood! Since I will not leave my tools on site overnight I packed this stand and saw back and forth to and from my rental for a few days and it was great, there's no way I would have got a regular miter saw stand into my car so this stand save the day! I'm sure it has many other uses to other people but for me this has become a dedicated stand for my miter saw and it has worked out great for me! There is only one reason I gave it 4 stars instead of 5 and that being that the hand cranks are plastic and often times I feel as if I might break them when tightening them but so far they have held up. All in all if you have an application that this stand can work for I highly recommend it.
Date published: 2016-08-09
Rated 3 out of 5 by from Not high quality Assembly was easy enough, but the quality overall is average at best. This product is not made in the USA. Would like to see that change.
Date published: 2016-08-02
Rated 5 out of 5 by from Awesome product My first time purchasing a bench like this. No regrets at all. The one frustrating thing was the directions.. I had a watch a bunch of YouTube videos because it wasn't very clear which clamp went where. Other than that its pretty awesome.
Date published: 2016-11-05
Rated 5 out of 5 by from Easy to set up and use alone or with a top for a portable workbench. I've had mine for 20+ years ... Easy to set up and use alone or with a top for a portable workbench. I've had mine for 20+ years and just bought one for my son.
Date published: 2016-12-09
Rated 5 out of 5 by from I have owned the B&D Workmates for years. Bought this one as a Christmas gift for my Son-in-law. I have owned the B&D Workmates for years. Bought this one as a Christmas gift for my Son-in-law.
Date published: 2016-12-06
Rated 5 out of 5 by from Perfect Father's Day Gift Easy to store and great quality. A great value!!!
Date published: 2016-08-02
Rated 4 out of 5 by from Workmate Sorry item not carried in stores, item very handy.
Date published: 2016-09-06
Rated 1 out of 5 by from Beware, Beware!!! Please make sure all of the parts have been included. Also, the instructions ... Beware, Beware!!! Please make sure all of the parts have been included. Also, the instructions are terrible. Illustrations are TOO SMALL!!! Very difficult to figure out. (Once figured out, then Black and Decker company does not pack the correct number of parts. Would not recommend!!!
Date published: 2016-12-25
  • y_2017, m_1, d_17, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_95
  • loc_, sid_202516379, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 105ms
  • REVIEWS, PRODUCT