Rated 5.0 out of 5 by 6
Rated 5.0 out of 5.0 by Fixinit A solid product
Attractive, functional, and durable. This will last a lifetime.
December 29, 2015
Rated 5.0 out of 5.0 by TADC Superior quality that you can feel right out of the box.
Really solid product. Beautiful. Replaced most of the bedroom and bath doors in the house with it. Workmen complimented the product. Solid zinc (as opposed to brass for their more expensive lines).
December 19, 2012
Rated 5.0 out of 5.0 by MikeC Great upgrade from Schlage
Replaced (broken) Schlage lever handles with these Baldwin units and couldn't be happier. Easy to install and instant upgrade in quality you can feel every time you turn the knobs. So easy to install, I had my 13 year old son do it.
April 29, 2015
Rated 5.0 out of 5.0 by Baze Great quality
Bought some of these at the store to install for bathroom and bedroom - they are great. Look WONDERFUL - I bought several different kinds of knobs and although these were the most expensive, they were totally worth it. They are a little harder to turn than some other cheaper models, but you can really feel the quality of the materials and the knobs feel very sturdy and comfortable in your hand. Very easy to install as well and you unlike some other door knobs I tried they do not show fingerprints or smudges with every touch.
April 4, 2013
Rated 5.0 out of 5.0 by AJ1G An A Plus Quality Lock With an F Minus Installation Technical Documentation Issue!
Bought the subject Prestige Series lockset today to replace one that (rare for a Baldwin) had failed due a broken latch activation mechanism. We have been using the solid brass Baldwins over the cheaper brass plated Schlage and Kwiksets for many years because of their quality solid feel, and because the finish will never wear off.
All went well with the install (I have removed/replaced/repaired/installed many locksets over my 61 years) until I went to finish up the job by putting the knobs on the shafts. To quote the instructions - "Place lever or knob on assembly and tighten setscrew to secure. Repeat for the knob or lever on the other side". These words were accompanied by the usual picture of an allen screw being rotated to tighten it on the knob shaft with the (supplied) allen wrench..
Easy enough, right? Just like every other knob with an allen headed set screw you have ever worked on in your life, right? WRONG!!!!!
At first i noticed that there were no set screws in the knobs, and there were certainly none in the bag of hardware that came in the box. I assumed that for some reason this lockset somehow was shipped without the setscrews being installed in the knobs (in over fifty years of working on radio and electronic equipment, and door knobs as well (including all our previous Baldwins), I have never seen a knob that was sold without the setscrew already installed in it. So I totally took apart the already installed lockset, packed it up and headed back to our local Home Depot to get a replacement lockset on exchange.
However (after getting drenched in the pouring rain we had today on the way over to the store) it turned out all of the remaining locksets in stock also appeared to be missing their knob setscrews, Furthermore, upon close inspection of the knobs, their setscrew holes were not threaded! What the heck? Finally, after puzzling over this enigma with the guy at the service desk for about twenty minutes, we figured out that the set screws were indeed there - they were screwed flush into the shafts that the knobs attach to. After nearly breaking the little allen wrench trying to remove the screws by doing the usual lefty-loosely counterclockwise rotation, and puzzling as to why they were in the shafts on the first place,we figured out that the setscrews were REVERSE THREADED, and had to be turned CLOCKWISE to come up out of the shaft. The way the design works (which is totally counter-intuitive to anyone who has ever put a knob on a shaft before) is that the knob is placed on the shaft so the setscrew hole lines up over the flush setscrew in the shaft, and then the setscrew is then raised up into the hole of the knob to secure it from rotating on the shaft. There apparently is a taper to the hole in the knob so the setscrew "tops out" (as opposed to bottoms out) as it is raised up into the hole which keeps the knob tightly secured, and prevents losing the setscrew by backing it all the way out of the knob.
An effective, and elegant design - but it is so counter-intuitive and literally 180 out from a conventional knob and setscrew design it needs to be thoroughly explained in the installation instructions. I wasted a whole lot of time figuring something that normally is very simple out. Who has ever previously put the setscrew in the shaft vs. the knob, and then to further frustrate the purchaser, used a reverse-threaded setscrew that has to be turned CLOCKWISE to remove it from the shaft? Arrgh! I would not be surprised that there have been many others having the same problems I did. I recommended that the hardware manager at the local Home Depot make up a little "heads up" info sheet and attach them to the product boxes to make up for the woefully inadequate instructions supplied by Baldwin. Baldwin should be revising their instruction sheets and doing something similar for those products with this design already shipped.
December 29, 2013
Rated 5.0 out of 5.0 by FLORIDAGUY Love this
These are SOLID door knobs! They are not the cheap feeling door knobs. It is heavy and really enriches my home. It's amazing how a door knob can change a look so easily! Yes, they are expensive, but they will last!
January 29, 2012