Model # BW1033

Internet #202042658

Basement Watchdog 1/3 HP Submersible Sump Pump

Basement Watchdog

1/3 HP Submersible Sump Pump

$123.99 /piece

Frequently Bought Together

Product Overview

With a vertical discharge design that is ideal for placement in sump pits as small as 7 in. in diameter, the Basement Watchdog 1/3 HP Submersible Sump Pump makes it easy to keep your sump running at optimal levels. The pump construction combines a cast-iron/cast-aluminum design with a stainless steel shaft and fasteners for durability while the permanent split-capacitor motor provides a powerful 3,600 GPH pumping capacity that delivers smooth operation.

  • Pumps 2,600 GPH at 10 ft. lift, emptying the sump pit quickly (3,600 GPH at 0 ft. lift)
  • 1/3 HP, 3.5 Amp permanent split-capacitor motor with dual motor-protecting seals provides optimal power output to keep the pump running smoothly
  • Vertical discharge design lets you install the pump in sump pits as small as 7 in. Dia
  • Built-in air relief vent, upper and lower ball bearings and thermally protected, water-cooled design for improved efficiency
  • Caged dual-float switch helps ensure drainage activation to add protection
  • Cast-iron/cast-aluminum frame with a stainless steel shaft and fasteners provides durability for long-lasting use
  • Includes 10 ft. power cord for easy installation
  • Stainless steel fasteners will not corrode
  • Cast iron/cast aluminum construction
  • Includes caged dual micro reed float switch for added protection
  • 3-year warranty
  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

how does this pump start andstop

how does this pump start andstop
Asked by: ron
The BW1033 pump comes with a BWC1 Dual Float Controller and Switch. The pump plugs into the socket on the controller portion. When both the switches are in their original downward position, there is no power coming through this socket. The switch portion of that device consists of two floats, which are buoyant discs on a stem inside a cage. When the water level reaches these discs, they float. When either of the discs is lifted ¼ inch the BWC1 system allows power to come through the socket on the controller portion. When this power comes out to the pump that is plugged into it, the pump will start up. After both of the floats are in their downward position, the controller will continue to output power to the pump for an additional 10 seconds, and then cut off power to the socket, stopping the pump.
Answered by: Glentronics
Date published: 2017-01-30

Can a garden hose be hooked up to pump for water removal. During heavy rains, sometimes water wil...

Can a garden hose be hooked up to pump for water removal. During heavy rains, sometimes water will back up onto patio, a pump is necessary to keep water from reaching house.
Asked by: Cmele
We highly recommend using 1 ½” PVC pipe for that pump, but yes you can purchase a pipe adaptor and a reducer and connect it to a garden hose if needed. Keep in mind this will decrease the overall pumping capacity. For more information, please contact our customer support team at 800-991-0466, option 3. We are available to take incoming calls from 9am - 5pm CT Monday through Friday.
Answered by: Glentronics
Date published: 2017-01-06

I already have a backup sump pump system. My main pump broke. Is it easy to install this pump to my backup pump?

Asked by: Amy
Installing this pump onto a current combination system when you currently have one of our systems is very simple. There are easy step by step instructions in the manual and you can also call us directly. If you are installing this pump onto a system that is not ours you will need to confirm that the discharge pipe is the right size or you may need to purchase additional parts to make this work. Please contact us directly for additional assistance our tech department can walk you through this process and lead you in the right direction. You can contact us at 800.991.0466 ext 3 for tech support.
Answered by: Glentronics
Date published: 2016-07-14

In shallow basin to avoid sucking air could you reduce the pipe size or throttle it with a valve during 10 sec run time?

Asked by: R2D2
Give us a call Directly at 800.991.0466 EXT 3 there may be some better options other than reducing the size of the pvc. It would be best if we talked to you and got a better understanding of your set up so that we can answer all of your questions and give you the best advice. We are open M-F CST 9-5
Answered by: Glentronics
Date published: 2016-05-26
  • y_2017, m_4, d_24, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_, sid_202042658, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 90ms

Customer Reviews

1/3 HP Submersible Sump Pump is rated 4.1 out of 5 by 12.
Rated 5 out of 5 by from great "little" pump I have a lot of ground water in the spring and my pumps goes off 2-3 times a minute so I burn our switches and sometimes pumps often. The sump area is plenty deep enough but narrow enough to make putting two full sized pumps difficult. I had a battery backup pump that was small but that finally went. Since I have a whole house generator I started looking at 120v pumps that could fit and found this one. It's only 6" in diameter and the switch can be centered over the pump so in no way interferes with my 3/4hp pump. Plus the 1/3 hp 2200gph means that it will keep up even in the spring. This is the only one i found that had the water exit out the top and a float that wouldn't interfere with the float on my second pump.... great idea....
Date published: 2011-03-25
Rated 5 out of 5 by from Well worth the investment This was a replacement for the main pump on the watchdog combo after 10 yrs the pump and battery both died the same week well I got my money's worth very very happy with this product highly recommend and their customer service was great to deal with as far as the backup pump goes it still working thanks watchdog for a great reliable well made product
Date published: 2016-08-02
Rated 5 out of 5 by from Small footprint, fast, quiet, good value My old pump ran every 15 minutes for 6-7 seconds, rain or shine, winter or summer and lasted 6-1/2 years. I replaced it with a new Basement Watchdog pump that only runs every few hours. The new pump is much quieter and the water does not hammer the check valve like the old 3/4 HP Flotec. Also saving on electricity, the new pump uses 3.5 amps the old one used 7 amps. With my very active rusty water sump, only time will tell how long this new pump will last. The only con I could find is the non-adjustable run time. Because of the fixed 10 second run time I had to mount the float higher then the recommended height (the upper float trip is above the drain pipe), so that the pump would not run dry.
Date published: 2013-08-12
Rated 5 out of 5 by from Keeps the water out Simply to install and works better than I expected. The on and off float is GREAT!
Date published: 2016-03-01
Rated 5 out of 5 by from Works Great, Quiet. My old sump pump was failing and I had already purchased a Watchdog battery powered sump pump. Installation was a breeze. The new 1/3 HP sump works great. Very strong, very quiet. I really like the top discharge.
Date published: 2013-04-30
Rated 3 out of 5 by from Great long as it lasts Pump lasted 3 months in a sump with very little 'run time'. Replacement pump was shipped within hours and received within 3 days. The replacement is running now. Time will tell how long this one lasts.
Date published: 2011-09-06
Rated 1 out of 5 by from Defective out of box I bought this back in March to back up my still-working sump pump in case it failed. We had a wet spring/early summer so I let the old one keep going. Fast forward to July and I just installed it and it doesn't work, won't even pump water out of a 5 gallon bucket. Just sits there and hums when directly plugged in to outlet in "continuous duty" mode. I was able to reinstall my old pump with no trouble, but unfortunately I'm beyond the 90 day HD return period so I have to pay to ship this defective pump back to the manufacturer. Moral of the story - test your pump in a bucket right away even if you're not ready to install it immediately!
Date published: 2013-07-07
Rated 4 out of 5 by from So far, so good This pump was easy to install, though it's worth pointing out that the outlet is high - if you have a shallow well and a horizontal bend to the outflow pipe, like mine, it could be a tight fit. Positive notes: it's quiet and fast. We've had it installed for over a month without incident. The well empties in seconds. I didn't measure the actual electrical usage, I'm trusting the box where it says it's efficient. It would be nice if the shut-off delay was configurable. As it is, it continues to run for ten seconds after the water level goes below the switch. I have to have the float switch awfully high in the well, but it still empties it out and sucks air for about a second.
Date published: 2013-08-04
  • y_2017, m_4, d_23, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_, sid_202042658, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 86ms