Model # DP800HD

Internet # 202563433

Store SKU # 425629

800 GPH Waterfall Pump

$79.98 /each



Model # DP800HD

Internet # 202563433

Store SKU # 425629

The Beckett 29/32 HP Waterfall Pump comes with a filter for convenient installation. This outdoor waterfall pump has an adjustable valve so you can create the effect you want. This submersible waterfall pump has a maximum capacity of 900 Gal. and a maximum flow of 800 GPH at a lift of 154-13/16 in.

  • 29/32 HP motor pumps a maximum flow of up to 800 GPH at up to 154-13/16 in. lift for excellent performance
  • 900 gal. maximum capacity
  • Outdoor submersible pump works well in waterfalls
  • Adjustable valve helps you create the effect you want
  • Filter included for convenient installation

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.


Product Depth (in.) 
Product Height (in.) 
Product Width (in.) 
Adjustable Valve 
Amperage (amps) 
Commercial/Residential Use 
Horsepower (hp) 
.09 hp 
Maximum Capacity (gallons) 
Maximum Flow (gallons per hour) 
Required Tubing Diameter (in.) 
Voltage (volts) 
Warranty / Certifications
Certifications and Listings 
1-UL Listed 
Manufacturer Warranty 
2 Years 


Price: $50 - $100
Brand: Beckett
Review Rating: 3 & Up
Maximum Flow (gallons per hour): 500 - 1000
2 Questions2 Answers

Customer Questions & Answers

800 GPH Waterfall Pump
800 GPH Waterfall Pump

Ask your questions. Share your answers.

Clear Search Term
Sort By:
This question is from 800 GPH Waterfall Pump
2 answers

Does HD sell replacement pre-filters for the Beckett DP800 pond pump?

This question is from 800 GPH Waterfall Pump
Asked by
nashville tn
Read all my Q&A
April 4, 2016
Does HD sell replacement pre-filters for the Beckett DP800 pond pump? PURCHASED AT HOMEDEPOT AT THE THOMPSON LANE LOCATIONS NASHVILLE, TN
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Wild & Wonderful West Virginia
Read all my Q&A
April 9, 2016
Yes, they are available in 2 packs.
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Nashville tn metro
Read all my Q&A
Home Improvement Profile: DIYer
April 8, 2016
Yup. I saw them in stock at the Smyrna store last week when I bought this model, or available for free ship to home
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
This question is from 800 GPH Waterfall Pump
0 answers

thrust washers

This question is from 800 GPH Waterfall Pump
Asked by
Miami ,florida
Read all my Q&A
December 26, 2015
how can i order parts for this pum, I need the thrust washers, my buts broken this part twise.
Thank you very much
Vindemia Urra
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-07-01 T21:27:02.812-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202563433, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 231ms


Rated 3.3 out of 5 by 16 reviewers.
Rated 4.0 out of 5.0 by Good waterfall pump Placed into a 4 foot pond with sprinkler pump. Used this one for the waterfall. Still working nicely. April 12, 2016
Rated 5.0 out of 5.0 by Very happy with this product. We installed this in an existing pond built by the previous owners. It was definitely "plug and play" and moves enough water over the rocks to give a pleasant and soothing waterfall sound on the deck and back yard. The filters are easy to remove and clean, and the cord is long enough to make it easy to get to a GFCI receptacle. It has only been in use for a few weeks, but it hasn't missed a beat. May 13, 2014
Rated 5.0 out of 5.0 by This pump rocks! I have this pump in my pond, running to a canister filter and the UV sterilizer and a waterfall. It is strong enough to pump water through both. The sponges have to be cleaned regularly, but that is due to the existing sludge in the pond. Cleaning is easy, just pull the sponges off and rinse. January 28, 2014
Rated 4.0 out of 5.0 by Good, if you take the time to set it up right. I agreed with the other users initially. I bought the pump at Home Depot hoping for something to circulate water in a small pond for a reasonable price. The first time around, the pump worked well at first, but got progressively louder after a few weeks, and then burned out altogether. I called Beckett, and they gave me the option of returning it to HD or they would send me a new part. Being clever, I had Beckett send me a new part AND HD was kind enough to exchange the broken pump, no questions asked. So I got a replacement and the replacement part, for free, both companies had decent customer service. Now, the second time I set up the pump, I paid closer attention to the ratio between the water sent through the fountain and the water being sent through the secondary valve. Getting the pressure right is absolutely important. If you don't get the right balance, you are putting too much pressure on the impeller. Since finding the balance, the pump has been working perfectly, minimal noise, no burnout. If that changes, I'll update the review. Just take the time to set it up right. If you are at all worried about replacing the pump, go with a professional model from a pond store, but this worked well for me. August 29, 2013
Rated 3.0 out of 5.0 by pond pump I have a small pond that is about 700 gallons. I have bought this pump several times, why did I buy it several times is because even with cleaning the filters or filter weekly on the older models the impeller spinning rod that the magnet was on inside use to break all the time making it useless, I would have to go return just about every 2 to 3 months. They have upgraded to a metal rod that is much better, it has not broken once. the new filters are so much thicker that I believe they will keep out debris and stop the causing and magnet and casing from getting jammed or damaged. I honestly hated the old pumps but the new ones seem to have so many more improvements. Old replacement parts were astronomical it was probably better to by a new pump than spend the same just on the magnet and spinning rod. So far I have had no issues I did purchase the bio filter with this pump, but i did have a problem with the pump falling off all the time, the fit just did not feel fir, but I think that could be the angle of the hose to the fountain that caused that issue. I had additional filter parts and have made it work, it is going strong with little maintenance. Happy for the improvements. October 13, 2015
Rated 3.0 out of 5.0 by Nice, but.... These pumps seems easy to use, but they have drawbacks. 1. The connections are non-standard, so the pump connects with its own parts, but not standard pipe threads, etc. 2. The filters clog easily and often. It would improve the system greatly if the inlet nipple would connect to standard threads and then to a better filter. 3. The impeller bearing failed. 4. The filter is a mesh material that collapses when clogged. For the price I want more of a pump. Or, at least, replacement parts. March 11, 2015
Rated 1.0 out of 5.0 by They keep burning out I just burned out my 3rd one. The 1st one lasted about a month, the second one 2 months and this last one only 3 weeks! With the last one, it started making a buzzing noise after a day, then when it finally gave up it made a horrible grinding noise. I keep the filters clean and check on it every day. It's a shame because when it does work, it works well. This pump is plenty big enough for my pond so I really don't understand. I don't see anywhere to make adjustments on it and there isn't a detailed manual. Also, Beckett doesn't carry this on their website so there's something fishy here (pun intended). Thankfully Home Depot hasn't given me any problems returning it. I'll find out later today if they'll let me do another exchange. October 8, 2013
Rated 2.0 out of 5.0 by DOA after 10 months This pump appears well made and easy to operate. The long filter is essential for smooth operation. I was very pleased how strong the pump worked and how easy the filter was to clean. It stopped working after 10 months! there are not a whole lot of choices out there for my set up for this type of gph so I will have to buy another and hope for better luck.. September 1, 2014
  • 2016-06-28 T14:52:34.382-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_16, tr_16
  • loc_en_US, sid_202563433, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 225ms