Model # BFNLS01ORB

Internet #202041718

Belle Foret Pedestal Lavatory Supply Kit in Oil-Rubbed Bronze

Discontinued Belle Foret

Pedestal Lavatory Supply Kit in Oil-Rubbed Bronze

store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

Conveniently packaged, the Belle Foret pedestal lavatory supply kit adapts to 1-1/2 in. and 1-1/4 in. drain inlets. This kit includes bullnose faucet risers, compression cross-handle angle stops, IPS sure grip flanges, copper pipe compression adapters and a P-trap with high box flange. Available in a variety of finishes, this kit is sure to complement your existing fixtures.

  • Charming cross handle angle stops with 1/2 in. IPS inlet
  • 1-1/2 in. OD by 1-1/2 in. OD P-trap can be adapted to fit 1-1/4 in. OD drain tailpiece with use of polyethylene reducing washer (not included)
  • 3/8 in. OD by 20 in. bullnose rigid risers, flanges and IPS x compression adapters included
  • Oil rubbed bronze finish-matched valves, supply lines, flanges, adapters and trap give an attractive appearance to a normally style-less installation
  • Includes two 5/8 in. ID and two 1/2 in. IPS sure grip flanges
  • Includes two 1/2 in. MIP x 1/2 in. copper pipe compression adapters
  • Includes one 1-1/2 in. x 1-1/2 in. or 1-1/4 in. P-trap with high box sure grip flange



Product Depth (in.)
Product Height (in.)
Product Width (in.)


Hardware Included
Plumbing Part Type
Sink Kit

Warranty / Certifications

Manufacturer Warranty
Limited warranty. Please contact Westbrass customer service at (800) 39-BRASS [392-7277] for more information.

More Products With These Features


Customer Questions & Answers

Do you have this product available with a "straight" stop valve, rather than valve with a 90 degr...

Do you have this product available with a "straight" stop valve, rather than valve with a 90 degree turn?
Asked by: Matt
Hi Matt, for this Pedestal Lavatory Supply Kit in Oil-Rubbed Bronze, if ordered on, will be purchased and shipped as it appears on We are not able to make changes to the product and do not offer straight stop valves. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot!
Answered by: THDSupport
Date published: 2016-12-17

How long are the supply lines?

How long are the supply lines?
Asked by: Matt
  • y_2017, m_7, d_25, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_, sid_202041718, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 206ms

Customer Reviews

Pedestal Lavatory Supply Kit in Oil-Rubbed Bronze is rated 2.0 out of 5 by 5.
Rated 2 out of 5 by from Didn't work for me, so I returned it I was looking for a complete oil-rubbed bronze kit because I have a sink that is open to view at the drain. At first, I was excited because it was the most complete set I could find. The P-trap can be found easily but the difficult thing (surprisingly) were the trim pieces. also this was the only oil-rubbed angle stop I could find. So far, so good. But when I went to assemble, I could not get the compression end of the angle stop not to leak. I also found that the p-trap is sized at 1.5 inches and the majority of wall openings seem to be sized at 1.25 inches. Bad for a retrofit. Last, the angle stops had one end of the oil-rubbed tube connection, but the kit did not have the other end, that connects with the inlet tubes for the fawcet. At that point, I gave up. Nice try and does have the right finish, but too hard to install and too many Do It Yourself trips back to Home Depot to try and make it work.
Date published: 2011-07-16
Rated 1 out of 5 by from Ended up being an Expensive P trap Installed the angle valve and could not get it to stop leaking. Had the company send replacement parts which fixed the problem. Then 2 weeks later I went to install the sink and now the angle valve was leaking again. They sent me a new angle valve and I installed it and it was working great. I was unable to get the water lines to the sink to work so I ended up just buying flexible lines and spray painting them. This setup worked great for 3 months until I went into the bathroom and noticed water on the floor. One of the angle valves was leaking again. I'm getting rid of these unreliable angle valves and taking a shark bite valve and spray painting it. So I ended up spending 100+ dollars on a P trap... Oh and I get to re-grout my floor from the water damage (hopefully I don't need to redo the new floor completely)... Needless to say, I will never buy a Westbrass part again.
Date published: 2015-12-31
Rated 5 out of 5 by from So happy fo find this!!! This pedestal lavatory supply kit was an answer to my problems. I was having some remodeling done at my house and one of the projects was removing a vanity in the powder room and replacing it with a pedestal sink. I had chosen a oil rubbed bronze faucet and was told by my plumber that to purchase oiled rubbed bronze parts that show with a pedestal sink would cost a fortune. I was so disappointed until I found this kit at Home Depot. My plumber was so surprised that I found the kit and especially surprised at the price. My pedestal sink looks great with the oil rubbed bonze supply kit.
Date published: 2010-08-23
Rated 1 out of 5 by from Oil rubbed bronze pedestal sink plumbing kit The handles and plates of this kit were fine. When it came time for the plumber to connect the water lines, the straight tubing that came with the kit, had to be shaped in a curve to allow connection to the wall water lines. All water connections require this shaping. The finish on the tubing flaked off in big chunks, exposing copper tubing. They could not be used. My plumber ended up using the flexible metal hoses, that should be used for plumbing installs. I will paint the hoses to match. This kit should be updated with those flexible hoses instead of the straight painted copper tubing. If you can purchase the handles and plates in this finish seperately, you will be better off. I would not purchase this kit again. I would buy the parts and paint them a black/brown color and would have the same product for half the cost and frustration.
Date published: 2011-03-19
Rated 1 out of 5 by from Wrong size The product says its for a bath install however the pipe is 1 1/2" which is for a kitchen fitting. It needs to be 1 1/4". There fore I could not use it.
Date published: 2012-10-17
  • y_2017, m_7, d_25, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_, sid_202041718, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 124ms