Model # 1503006

Internet #202088919

Store SKU #958751

null Birch Plywood (Common: 3/4 in. x 2 ft. x 4 ft.; Actual: 0.728 in. x 23.75 in. x 47.75 in.)

Birch Plywood (Common: 3/4 in. x 2 ft. x 4 ft.; Actual: 0.728 in. x 23.75 in. x 47.75 in.)

$2498 /each
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

Birch handy panels are perfect for small projects and repair work. They are easy to transport, lightweight, and priced right - everything you need to get a job done quickly.

  • Birch handy panels are perfect for kitchen cabinets, bookcases, or an entertainment center
  • Panels finish beautifully with paint, stain, or polyurethane. Handy size means less waste, and an economical price
  • 18 mm x 24 in. x 4 ft.
  • Organize you workshop or basement, handy sized panels are pre-cut and ready to use
  • Note: Product may vary by store.
  • Click to learn how to select the right lumber for your project




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Can I use this wood for a routed wood sign with inset letters?

I know sometimes there are small holes in plywood but I am not sure if its the same with birch.
Asked by: Ryan
Hey Ryan, Yes, you can absolutely use this for sign making! Since it's birch, you'll be getting quality and a durable sign at that once you are done making it. Joseph
Answered by: JosephHDATL
Date published: 2017-03-21

i want to use this to make a desk 2ft x 4ft desk. will this work for it? will i need to support it with extra wood on the bottom?

Asked by: nugget
It would be fine for a desk top... but, yes! It would need to be supported.
Answered by: BC Customer Service
Date published: 2017-03-21

I am going to make a custom made longboard, is this wood strong enough?

the longboard is (will be) 40 inches long and 12 inches long it will look like this
Asked by: sdgnbdfd
Birch is not graded for strength, only for appearance. It probably would work but can’t guarantee. Birch plywood is made with interior glue, it is not water/weather resistant. AC pine/fir or Radiata plywood would have a smooth finish and is made with exterior glue.
Answered by: BC Customer Service
Date published: 2017-05-31

lamination details

How many laminations or plies are used to make this? Are they all Birch or is something else used?
Asked by: Tommy
Typically, 11 or 13 ply. This high-quality Canadian made plywood uses birch for the cores too. There are no softwood fillers of other species. There are also very few voids. Those few voids I've found are small: no greater than one inch and usually less than a half inch. That's saying something too since I have made numerous projects with this stuff and many of them required small pieces, so IF there were any voids, odds are I would have found them.
Answered by: GeoWright
Date published: 2016-05-05
  • y_2017, m_7, d_17, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_, sid_202088919, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 96ms

Customer Reviews

Birch Plywood (Common: 3/4 in. x 2 ft. x 4 ft.; Actual: 0.728 in. x 23.75 in. x 47.75 in.) is rated 2.8 out of 5 by 8.
Rated 1 out of 5 by from Go to the store and pick your own. My piece arrived with a bar code sticker in the middle of it.... Go to the store and pick your own. My piece arrived with a bar code sticker in the middle of it. The glue from the sticker left a perfect outline of the sticker. The store manager gave me a can of acetone to remove the glue. It appears to have driven the glue deeper into the wood. The outline of the sticker is still very obvious. Make sure the good side of the piece is not affected by labels, dents or chips. Good luck....
Date published: 2017-02-07
Rated 4 out of 5 by from Decent product if you know what you're getting I like these "handy panels" because the small size makes them MUCH easier to move and handle than full 4 x 8 sheets. Yes, our local HD will cut big sheets in half for free on their panel saw, but I prefer to not bother with that because it such a hassle to inspect large sheets, select one then have an associate cut it down to manageable sizes. These "grab-n-go" sizes save me time. Quality; generally, these seem to be "shop-grade" sheets that have been cut down to remove defects. Occasionally some edge-checking or voids get through, so inspect before you buy if that is important for your projects. I need superior quality for building speaker cabinets where tight-tolerances and structural integrity are essential. So long as I spend he time to look for the better sheets, that has not been a problem. Often times, sheets are stored haphazardly, which leads to warping. If the warping is not severe, I can correct that by storing the sheets on a perfectly flat glass table and applying gentle heat with a heating pad; like an electric blanket. I use the low setting to prevent excess heat build-up, since I do not want to start a fire. Depending on the severity of the warpage, it may take a few hours to several days to flatten the sheets. Once they are flat, I let them cool and they tend to stay flat afterwards. Edges are generally straight, but I have never seen a perfectly four-square board, so some re-sawing to dimension will be necessary for almost every project. So long as you know what to expect and how to deal with minor defects, HD's Baltic Birch is a decent product. Being able to buy small quantities and select the best sheets makes up for the slightly higher net price of these smaller boards. If they always stored this material so it stayed flat and sold it at the large-quantity price I would give it a five star rating.
Date published: 2010-12-22
Rated 2 out of 5 by from Mind the gap I needed a smooth 3/4" 2' x 4' plywood panel, for building a top for a changing table. I probably should have checked it more closely at the store, but during assembly I noticed a gap in the core below the veneer, it goes through the entire piece. See the attached photo, I will use it, as it is no longer returnable. But I am disappointed that Home Depot would accept defective building materials from their suppliers.
Date published: 2016-08-27
Rated 2 out of 5 by from Not Impressed I went to Home Depot planning to buy a full sheet of the birch plywood, but in comparing the quality of the handy panel it appeared to be the better product based on having 6 layers of veneer rather than only 2 with a solid core on the full sheet. I ended up having to spend more than the cost of the 4x8 sheet, but thought it would be worth it for the drawers I am building. Upon cutting this plywood, it was very convenient to work with; no need to cut down before going straight to the table saw. However, there were many more voids in the laminate than it appeared at first. This became a bigger issue when cutting the dovetails. In summary, the size of the handy panel is nice. My complaint is only with the quality of the plywood.
Date published: 2012-01-01
Rated 3 out of 5 by from 2'x4' Plywood Panels To GeoWright on his review. I buy nothing, But 2'x4' plywood panels, 3/4",1/2", 3/8" of different types and quality from HD, it just makes me mad that the stores don't store the sheets flat. Most of the sheets get warped standing on edge in the racks. I have complained many times to the store management, But it doesn't do any good. Might as well talk to the wall. If I had a better supplier, believe me I'd go there!! The fact is that HD doesn't care if the plywood is warped, their attitude is if you don't like it, go somewhere else. Loew's has there's on edge in racks too. So I can buy warped plywood from HD or go to Loew's and buy their warped plywood. Most everything else I buy from HD is great!
Date published: 2016-02-12
Rated 3 out of 5 by from bar code placement I purchased a small sheet of birch to make a leaf extension for a table. The bar code label was in the exact center of the better side which left the label glue when removed. Quit a bit of sanding was necessary to clear this area for staining. Would it be too much to have the bar code placed on the end or at least very edge of the wood product. Obviously someone who never has worked with wood was in charge of the bar code label placement.
Date published: 2015-12-19
Rated 4 out of 5 by from 2' x 4' x 3/4" plywood Good piece of wood, used it for a shelf with an aluminum u bar for a front edge.
Date published: 2016-09-29
Rated 3 out of 5 by from Not a smooth cut by the lumber dept I like that Home Depot cuts small sizes of plywood so I don't have to purchase a 4x8 sheet for a small project. I have purchased many of these over the years. This time whoever ripped the 4' side ruined about a 1/2" of the edge by splintering it. I still could use the piece by ripping it again and making a smoother edge, but I expect more from HD than this. Please be more considerate of the customer next time you rip these pieces down.
Date published: 2016-02-02
  • y_2017, m_7, d_17, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_, sid_202088919, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 108ms