0783786372478

Blackburn

Model ASR0214-B2-10

Internet #100172350

Store SKU #526936

Dual Rated Splicer Reducer #2 Stranded to #14 AWG with Solid Barrier Wire Stop (2-Pack)

$5.47 /each
  • Tin plated for low contact resistance
  • Solid barrier wire stop
  • For use with copper and aluminum conductors

Frequently Bought Together

Product Overview

The Blackburn Type ASR Splicer Reducers with Solid Barrier Wire Stops for #2 Stranded to 14 AWG Wire (2-Pack) can be used on copper or aluminum conductors. These wire connectors are UL listed for safety. They feature a 250-Volt rating. No special tools required for installation.

  • Used in power and grounding electrical connections applications
  • Compatible for use with copper and aluminum conductors
  • Solid barrier wire stop
  • Comes with two slotted screws
  • 2 Connectors per bag
  • Note: product may vary by store

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

3 Questions3 Answers

Customer Questions & Answers

Dual Rated Splicer Reducer #2 Stranded to #14 AWG with Solid Barrier Wire Stop (2-Pack)
Dual Rated Splicer Reducer #2 Stranded to #14 AWG with Solid Barrier Wire Stop (2-Pack)

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from Dual Rated Splicer Reducer #2 Stranded to #14 AWG with Solid Barrier Wire Stop (2-Pack)
 
1 answer

T&B ASR0214-B2 and AWG#14 Stranded Wire

This question is from Dual Rated Splicer Reducer #2 Stranded to #14 AWG with Solid Barrier Wire Stop (2-Pack)
Asked by
Massachusetts
Read all my Q&A
August 6, 2016
The specification sheet for this product lists the maximum wire as AWG#4 Stranded and the minimum as AWG#14. But it does not specify if the AWG#14 can be stranded wire or must it be solid wire?

I need to join (splice) an AWG#4 Stranded ALUMINUM wire to an AWG#12 Stranded COPPER wire.

Most other literature indicates that in order to join AL wire to CU wire, you must first splice a pigtail of solid CU wire to the stranded CU wire. Then splice the solid CU wire to the AL wire.

Can the AWG#12 stranded wire be connected directly to this reducing splice?
Is this reducing splice approved for connecting an AWG#4 ALUMINUM wire to an AWG#12 COPPER Stranded wire?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

August 16, 2016
Answer: 
Yes to both - this item can be used for this application.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Dual Rated Splicer Reducer #2 Stranded to #14 AWG with Solid Barrier Wire Stop (2-Pack)
 
1 answer

are these connectors for #3 wire up to code?

This question is from Dual Rated Splicer Reducer #2 Stranded to #14 AWG with Solid Barrier Wire Stop (2-Pack)
Asked by
mundelein , illinois
Read all my Q&A
September 1, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

September 3, 2015
Answer: 
Yes, the range for this connector is #2-14, so #3 wire would fall within that range.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Dual Rated Splicer Reducer #2 Stranded to #14 AWG with Solid Barrier Wire Stop (2-Pack)
 
1 answer

How do I attach wires to Blackburn Splicer Reducer?

This question is from Dual Rated Splicer Reducer #2 Stranded to #14 AWG with Solid Barrier Wire Stop (2-Pack)
Asked by
Langston, AL
Read all my Q&A
August 29, 2014
Part ASRO214-B2 is an aluminum block meant to joint two wires (heavier than 14 gauge) together. It is a rectangular item with a hole through it and screws on the end meant to clamp onto the wires. Do I strip the insulation off the wire longer than the block, so bare wire is sticking out of both ends? The HD web info on this product talks about solid barrier wire block, which sounds to me like the wire can only be pushed in less than 1/2 way, but the actual block only has a small tab pushed in the middle, which could be a block for each wire, or could be intended to clamp down on both wires at once. There is no description on the package as to how to use this, and I need a connection that won't come loose as it will connect 30 Amp 230 VAC wires to drive a submersible water pump
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

September 9, 2014
Answer: 
The ASR0214-B2 is for use with copper or aluminum conductors as small as #14 to as large as #2. You only need to insert each wire as far as the solid barrier wire stop, about 1/2 way inside the part. Only strip enough of the insulation off, to insert the conductor half way, until it hits that "stop" on the inside. Do not clamp down both wires together. Insert one wire on each end and clamp down Read More
The ASR0214-B2 is for use with copper or aluminum conductors as small as #14 to as large as #2. You only need to insert each wire as far as the solid barrier wire stop, about 1/2 way inside the part. Only strip enough of the insulation off, to insert the conductor half way, until it hits that "stop" on the inside. Do not clamp down both wires together. Insert one wire on each end and clamp down individually, using each screw. Read Less
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
1 of 1
  • 2016-09-08 T12:55:39.332-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100172350, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 17ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 5.0 out of 5 by 1 reviewer.
Rated 5.0 out of 5.0 by It is perfect for its intended use. The product is the best way to connect two different types of electrical cable. September 25, 2012
  • 2016-09-08 T13:54:53.255-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_1, tr_1
  • loc_en_US, sid_100172350, prod, sort_default
1-1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 15ms
  • REVIEWS, PRODUCT