Model # C6424

Internet #202498005

Store SKU #1001231198

Blazer International Trailer Lamp Kit 5-1/4 in. Stop/Tail/Turn Submersible Square Lights for Under and Over 80 in. Applications

Blazer International

Trailer Lamp Kit 5-1/4 in. Stop/Tail/Turn Submersible Square Lights for Under and Over 80 in. Applications

Was  $24.97
$1998 /each

Save $4.99 (20%)

Frequently Bought Together

Product Overview

Blazer C6424 Submersible Trailer Light Kit is designed to meet DOT requirements for trailers over and under 80 in. wide. This kit is not only ideal for boat trailers, but for any utility, camping, snowmobile, and motorcycle trailers. The "Bell Jar" design prevents water from coming in contact with bulb or socket. Additionally, the lenses are sonically sealed which eliminates the need for gaskets that can dry rot and leak. The stop/tail/turn lights feature universal back & side mount options. The lights are replaceable with Blazer model numbers B84 and B94. The kit includes 2 submersible stop/tail/turn lights, wire harness, license plate bracket, mounting hardware, and trilingual instructions- everything needed for easy installation. Additional side marker lights and reflectors are necessary to fulfill legal requirements.

  • Includes 2 stop/tail/turn lights, wiring harness, license plate bracket, mounting hardware, and trilingual instructions
  • Lenses are sonically sealed which eliminates the need for gaskets that can dry rot and leak
  • Dual mounting option mount on the back or the side of the trailer
  • Replacement bulbs are standard auto #194 and #1157
  • 12-Volt
  • Click here for more information on Electronic Recycling Programs




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

wire length

what is the length of the wires
Asked by: baja45
18 feet
Answered by: EV
Date published: 2017-03-29

how do I change a burned out light bulb

How do you remove the lens cover to get to the lightbulbs?
Asked by: Idaho
pop off lens cover to get to bulb
Answered by: lareau25
Date published: 2017-03-30

The lighs do not appear to be waterproof , as the wires enter the light through an open hole.

I use the lights on a boat trailer that goes in salt water and when I read they were submersible so I assumed they would be waterproof.
Asked by: wpd65
these lights are meant to be able to submerged under water but not for under water use. Just remember to rinse them if using in salt water. Like you would rinse the whole trailer with fresh water. They work fine is all wet conditions so far.
Answered by: EV
Date published: 2017-03-29

can I have it shipped to the store and pick it up later

Asked by: Lee
yes you can ,
Answered by: EV
Date published: 2017-03-29
  • y_2017, m_6, d_27, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_, sid_202498005, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 503ms

Customer Reviews

Trailer Lamp Kit 5-1/4 in. Stop/Tail/Turn Submersible Square Lights for Under and Over 80 in. Applications is rated 4.6 out of 5 by 9.
Rated 5 out of 5 by from Does the job at the right price point. This comes with everything you need to replace an old set of lights or set up a temporary system. I often haul cars or bigger objects where for safety reasons it is nice to have a set of lights higher than the level of a low trailer. These were a replacement on a set of old lights. It takes some time to run all the wires back to the front connection box, but required no special tools or skills the instructions were easy to follow. Everything fit the spaces I had available. I had no problems during the install.
Date published: 2017-03-29
Rated 5 out of 5 by from easy to install I've had my boat for over fifteen years. The lights it came with were not submersible. Consequently, If I forgot to unplug the light plug from the car, the bulbs would short out and blow. I had to carry extra tail light bulbs when I hauled my boat up to the lake for fishing. I did find it to be very easy to install. It comes with the complete new wiring harness, too. No more worries about unplugging the lights or replacing bulbs before coming home anymore!
Date published: 2017-03-28
Rated 5 out of 5 by from Stop/Tail/Turn Submersible Square Lights for Under and Stop/Tail/Turn Submersible Square Lights for Under are a swell item and I expect will be great once I submerge them into the lake water which I have not done yet. I did have a chance to attach them to my boat trailer in which I did not have to drill extra holes because they went directly into the bar as well as the original lights had been along with the wiring input. What a great product from the Seed account.
Date published: 2017-01-20
Rated 5 out of 5 by from You get what you $$ for. I have replaced many trailer light sets over the years. I have used all different brands and I have learned that the quality and the longevity of the blazer products are most reliable. The package comes with everything needed to install on the trailer. Although recommend a more durable cable tie than the cheap ones provided. Overall this is a more costly package but it will outlast other cheaper products.
Date published: 2017-04-07
Rated 4 out of 5 by from 4 Star Review Rating provided by a verified purchaser
Date published: 2017-04-21
Rated 4 out of 5 by from Good Trailer Light System The Blazer Submersible Trailer Light Kit uses standard 12volt bulbs, not LED bulbs. Each kit includes 2 lights, a wiring harness, a license plate bracket and mounting hardware. I did not use the wire nuts supplied in the kit to connect the lights to the wiring harness but used crimp on connectors instead. Also, to help insure a water proof connection I used heat shrink tubing. The lights have rear and side mount options. My trailer is setup for using the rear mount option. The wires on the wiring harness are color coded to right and left tail lights making it easy to identify which wire goes where. The ground wires attach to the metal trailer frame at each light and near the hitch using the trailer frame itself as the ground conductor. So, it is important to make sure that the wire is attached to the bare metal of the trailer frame because paint or rust may not conduct electricity properly. The acrylic lenses are pressed on and have to be popped off to change the bulbs. I would have preferred four screws to hold each lens on. The trailer lights are designed with a two bulb system and my Nissan Frontier uses a three bulb system so I would have to buy an electronic turn signal converter so that the running lights would work to use the trailer after dark or whenever running lights are needed. All in all, this is a good trailer light system and I would recommend it for use with a utility trailer or a boat trailer.
Date published: 2017-03-30
Rated 3 out of 5 by from Bargain Trailer Lamp Kit This Blazer International Trailer Lighting kit includes wiring and plugs to wire both the tow vehicle and the trailer. My tow vehicle is already setup so I did not use the tow vehicle part of the kit. Because I was replacing some old lights and wiring this kit needed no alterations to the existing trailer mounts. The trailer installation kit includes 2 stop/tail/turn lights, a license plate bracket, lots of colored wire, some miscellaneous hardware and wire-connectors and a 4-pin flat connector (1F, 3M, that fit nicely in the back of my round adapter plug). The trailer lights can be mounted from the back or the side, which I find thoughtful. I mounted them from the back using two carriage bolts per light. Wiring installation is straightforward from the tongue through whatever trailer frame holes are appropriate. Note that there is a ground wire at the tongue and 1 each at the lights, but there is no need to run an additional ground wire the length of the trailer. There are several issues with the kit. The instructions miss a few steps. This is not such a problem because there is a wiring diagram included. There are 3 snap lock connectors included and I do not know if this is enough. It was for me as I needed only two for the side markers but it would depend on how many are needed for rear markers (1 if wired in sequence and 3 if wired separately). Lastly, the kit includes wire nuts to connect to the lights. I think a better approach is to use a splice covered with heat shrink tubing. The overall quality of the lamps is mediocre. They aren’t waterproof which seems like a key element in a boat trailer. However, the lights did work on the first test, and the overall time spent to rewire was minimal.
Date published: 2017-03-03
Rated 5 out of 5 by from Work well The only complaint I have is wire length could be 2ft. Longer. But I was able to reroute to get from one end to the other, just not the way the original wires went. But the lights are bright enough and easy to install.
Date published: 2016-08-16
  • y_2017, m_6, d_27, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_, sid_202498005, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 116ms