Model # OSC134C

Internet #205373459

Store SKU #1000127929

Bosch 1-3/4 in. Carbide Plunge Cut Oscillating Tool Blade for Cutting Metal and Wood
0000346465303

Bosch

1-3/4 in. Carbide Plunge Cut Oscillating Tool Blade for Cutting Metal and Wood

$24.97 /each

Frequently Bought Together

Product Overview

Carbide blade lasts 30 times longer versus a conventional bi-metal option in metal. Blade is tapered for even more vibration control and more efficient debris removal. Blade’s 1-3/4 in. width helps user speed through long cuts. Made for Plunge cutting hard screws, bolts, nails and other metals.

  • Carbide tip blade can cut both metal and wood
  • Tip is welded to a high-carbon steel body
  • Anti-vibration slots and thicker interface bracket reduces vibration
  • Bosch 12-pin Oscillating Interface System (OIS)

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

2 Questions4 Answers

Customer Questions & Answers

1-3/4 in. Carbide Plunge Cut Oscillating Tool Blade for Cutting Metal and Wood
1-3/4 in. Carbide Plunge Cut Oscillating Tool Blade for Cutting Metal and Wood

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
2 answers

Is this Bosch "premium" OSC134C 1-3/4-Inch Multi-Tool Premium Carbide Tooth Multi-Material Plunge Cut Blade better in any way than the Bosch OSC114C

This question is from 1-3/4 in. Carbide Plunge Cut Oscillating Tool Blade for Cutting Metal and Wood
Asked by
Read all my Q&A
April 29, 2016
Both blades are made by the same manufacturer, with teeth made or coated with carbide, but one is called "premium" and costs more than the other? What is the difference?

BTW, I have been using the Bosch OSC114C 1-1/4-Inch Multi-Tool Carbide Tooth Plunge Cut Blade for 1+ years and it is the best I've had by far, a real workhorse; just wondering if Bosch made a better one :)
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
May 2, 2016
Answer: 
Thank you for your question. The OSC134C and OSC114C are the same carbide blades. The only difference is the OSC134C is 1/2" wider to allow for wider cuts.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
San Diego, CA, USA
Read all my Q&A
Home Improvement Profile: DIYer
May 1, 2016
Answer: 
The one you have is 1 1/4" inch wide, this is 1 3/4" wide, 1/2" wider. Otherwise, I'm not aware of any differences.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

does it fit fein oscillating tool?

This question is from 1-3/4 in. Carbide Plunge Cut Oscillating Tool Blade for Cutting Metal and Wood
Asked by
Read all my Q&A
February 23, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
February 25, 2016
Answer: 
Thank you for your question. If it does not work with your model we do offer our OIS001 adapter that will allow our Bosch accessories to fit most other manufacturers oscillating multi-tools.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

February 24, 2016
Answer: 
It fits the Fein Multimaster tool.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
1 of 1
  • 2016-10-30 T22:28:36.441-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_205373459, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 67ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.8 out of 5 by 23 reviewers.
Rated 5.0 out of 5.0 by Awesome Blade I used this blade last weekend to trim door jambs when installing ceramic tile for my daughter. It made nice smooth cuts and made the tile installation look professional. Additionally I tiled around a fireplace and trimmed the bottom of the mantel so the tile could slip underneath the mantel. It cut smoothly and quickly. Being carbide it does cost a little more but having to stop working to go get a new blade because yours just went up in smoke is costly in time and effort. I made about 10 cuts with this blade - mostly maple - and it still looks and feels new. I would have used 2 steel blades cutting this amount of maple. It's awesome. March 24, 2015
Rated 5.0 out of 5.0 by It works with myGerman tool Was looking for something to work with my German tool after the old tooling broke the Bosch tool worked with ease and got the job done June 28, 2016
Rated 5.0 out of 5.0 by Tougher than nails... The Bosch 1-3/4 in. Carbide Plunge Blade is worth a the few extra pennies it costs vs the non-Carbide models. The manufacturer states that this Carbide blade has a lifespan 30x that of a standard non-Carbid blade. I have used this particular blade with my Bosch oscillating tool to cut drywall, sheer off the excess threaded bolts from a toilet install, and plunge cut into plywood subfloor. The blade continues to impress and cut through material as if it were brand new. I had never used one of the Carbide blades due to the increased cost... now, I doubt I will ever buy anything else as this blade has already done the work of 3 non-Carbide blades and is still rocking it. I highly recommend this plunge blade. March 30, 2015
Rated 5.0 out of 5.0 by Sharp, strong, cuts with ease This Bosch premium carbide blade has a direct interface with Bosch, Skil, Ridgid, Milwaukee, Makita, Rockwell X2, Masterforce, Performax, Mastercraft, Tool Shop, and Chicago Electric tools, and many other multi-tools. 30 x Life vs. bi metal blades. Maximum operating speed is 21000/opm. This premium carbide blade is made for cutting wood, drywall, metal, and plastic. This blade has a built in OIS Adapter which fits perfectly and very snug and is compatible with tools made by Rockwell, Sonicrafter, Dremmel MM20, DeWalt, and Porter-Cable (but only with their adapter). This tool is very sharp, and makes cutting a breeze. The product does not have a manufacturers warranty or guarantee. Light weight and easy to assemble. March 29, 2015
Rated 2.0 out of 5.0 by Bosch Plunge Blade The 1=3/4 in. Bosch carbide plunge blade lost teeth after cutting 3 screws. I returned the item. May 31, 2016
Rated 5.0 out of 5.0 by One tough blade The Bosch 1-3/4 in. Carbide Plunge Blade is a welcome addition to my other multi-tool blades. I used it with my Porter-Cable multi-tool and the tool's adapter for other blade manufacturers. The blade is wider compared to standard blades and is carbide that has those fine teeth which I've learned is plenty tough and will be around for a while cutting through metals. Its an excellent choice for old wood where you might run into a buried nail. Because of its width its closer to the half circle blade which is not as precise in starting a cut. Because of the angularity of the edge on this Bosch blade it can be better controlled and then will cut along once started. Prior to this I've had to change out blades after first starting the cut with a standard plunge blade. This is not my first Bosch blade and they have given me great service. February 23, 2015
Rated 5.0 out of 5.0 by Excellent Blade This is an ideal blade for cutting the bottom section of door trim at the threshold when you are installing laminate flooring, among other things. Paring a slice of the trim away, allows the laminate to slide under, making for an attractive installation. If you have ever performed this task with a hand-saw, you will be amazed at how much more easily the job can be completed in just a couple of minutes without breaking a sweat by using a vibrating tool equipped with the proper blade (see picture). I had been using the stock blade that came with my Dremel power tool, and was only able to saw through about 4 door trim locations before the blade started to dull and burn wood. At that point, it became a chore to muscle the saw through the wood. I consumed 2 of those blades before trying this Bosch carbide blade. Although I had only 4 more trim locations to complete, after using this blade, the blade still looks new. The Bosch blade sliced through the wood with greater ease and precision than did the Dremel stock blades I had been using when they were new. I don’t have any remaining trim to complete, so I cannot comment on the long-term durability of the blade, but my sense from having used it, is that it will probably last many times longer than a conventional blade, making it a better value over the long run. Please note that I needed to purchase a Bosch multi-tool blade adapter in order to use this blade on my Dremel tool (no, a Dremel adapter will not work to fit a Bosch blade on a Dremel tool, you need to buy an adapter that is made by the same company that makes the blade or other attachment). However the cost of both brand’s adapters were under $1 and in-stock at my local HD. The Bosch adapter causes the Bosch blade to mount slightly offset on my Dremel tool (see picture), but I was still able to use the tool effectively. April 20, 2015
Rated 4.0 out of 5.0 by Excellent Cut, but most dangerous blade I've ever used as a DIYer. I received a Bosch branded Blade, pictured. It attached easily to my multitool and the package says it fits all multifools. Use safety glasses, clean up metal shavings to prevent injury to anything small, animals or human. This was ordered because I had an emergency safety situation that I had to take care of myself. My water main was buried under the roots of an Oak Tree, the cover no longer fits, a child had fallen into it. It is known to me that my entire neighborhood has complained about mutiple water safety issues and the county I live in ignores them. I had to figure out how to cut metal to raise the face plate safely slightly above the box. Two pieces of metal had to be cut. The aluminum was easy to cut, I did not just use it to plunge through the metal but I used it to cut a frame to go around the water lit. I then used a heavier sheet of metal that will sit on top of the box so a window had to be cut in that metal to keep it open to view the meter. I used very thin sheet metal. When making the cut the blade would fall through the metal and not pull out again. The top of the blade has a ridge. The ridge and tapered blade provided resistance to it being pulled back out of the metal. The vibrating metal made it hard to turn the multitool off at the same time I was cutting, hence dangerous. The precautions on the package were limited to general safety. I found the blade hard to control once it went through the heavier metal. I've cut metal to redo computers and also as a metal scrapper. Metal art is also something I do for art projects, I like both the compact size and easy cut. I would not recommend using this for any projects until you find an online tutorial dealing with safety issues. March 26, 2015
  • 2016-10-30 T20:33:24.648-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_23, tr_23
  • loc_en_US, sid_205373459, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 40ms
  • REVIEWS, PRODUCT