Model # GT100

Internet #202242747

Store SKU #910746

Bosch 1/8 in. Carbide Glass and Tile Bit
0000346372243

Bosch

1/8 in. Carbide Glass and Tile Bit

$6.97 /each

Frequently Bought Together

Product Overview

Glass and tile applications have never been easier. Nobody but Bosch is offering the innovation found in our product design. Our product features an unique product geometry with a precision tip, high quality carbide and reinforced head that results in best-in-class speed and life when cutting in glass and tile.

  • Precision tip - solves bit wander and bit walking
  • High quality carbide with a reinforced head that prevents bit cracking and provides a longer life
  • 3-flat shank to prevent slippage
  • Bosch branded, innovative geometry allows bits to drill faster
  • Reversible for convenient adjustment of screws while chucked

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

Can this drill bit be used to drill through porcelin tile?

Asked by: Bear
yes, turn your screw gun on low speed, you can put a piece of masking tape over the place you are going to drill and drill through it. this will help you bit not slide around on the tile when you start. i would get a cup of water and drill a little way though dip the bit in the water to cool it down. drill a bit more, dip it again. it will help the life of the bit.
Answered by: bart
Date published: 2015-11-14

Can I use this bit with a dremel

Bosch 1/8 in. glass and tile bit. I need a diamond drill bit for a dremel. I need it to drill a 1/8th inch hole. Will this bit work in my dremel?
Asked by: Anonymous
depends on what dremel you have. you need a chuck. i don't know if the dremel you have has a chuck. personally i would not use this in a dremel, this bit doesn't work super good if you are at high rpm. if you don't have a drill here is a cheap option that you can get if you don't use it all the time. http://www.homedepot.com/p/Ryobi-5-5-Amp-3-8-in-Variable-Speed-Drill-D43K/205216326 drill is a very useful tool to have. you don't need anything fancy just something that gets the job done.
Answered by: bart
Date published: 2015-11-14

Best bit to use on travertine tile?? I've heard carbide mason,dimond,etc...

Asked by: Djfrench
Thanks for your question. We would recommend our diamond hole saws. They are designed for drilling into Travertine, Marble, Slate, Granite, Limestone, Porcelain and Ceramic Tile.
Answered by: BoschTools
Date published: 2016-06-02

I am a jewelry maker and trying to drill through small crystals.

I am using a table drill press. Multi-speed. I have tried a diamond bit (1/16) but it has too much give trying to cut through at a vertical angle. Would this piece work?
Asked by: Tori
Thank you for your question. The best bit to use would be a diamond bit. We have not tested our glass and tile bits for drilling into crystals. They are designed for drilling into glass and tile.
Answered by: BoschTools
Date published: 2016-08-28
  • y_2017, m_3, d_20, h_13CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_, sid_202242747, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 19ms
  • QUESTIONS, PRODUCT

Customer Reviews

1/8 in. Carbide Glass and Tile Bit is rated 3.5 out of 5 by 16.
Rated 4 out of 5 by from These bits are great for getting thru porcelain tile. I usually use an 1/8" bit to start my hole ... These bits are great for getting thru porcelain tile. I usually use an 1/8" bit to start my hole and then step it up progressively. These particular bits are very sharp when new but dull quickly. You must cool the bit off in water about every 5 seconds or you will melt the head off in the hole and really give yourself a problem.
Date published: 2017-03-18
Rated 3 out of 5 by from Worked fine, best result had slight water spray from bottle Simo with drilling, I think this redu... Worked fine, best result had slight water spray from bottle Simo with drilling, I think this reduced heat a lot ,
Date published: 2016-12-27
Rated 5 out of 5 by from Drilling through til3 I can't believe I never tried this bit before. Worked beautifully!
Date published: 2016-11-02
Rated 4 out of 5 by from takes forever to drill but it didn't crack the glass takes forever to drill but it didn't crack the glass
Date published: 2017-02-22
Rated 2 out of 5 by from It seemed to wear out really fast... It seemed to wear out really fast
Date published: 2017-01-18
Rated 5 out of 5 by from Does everything I expected. Does everything I expected.
Date published: 2016-12-06
Rated 1 out of 5 by from Not effective for porcelain... Not effective for porcelain
Date published: 2017-02-08
Rated 1 out of 5 by from Doesn't hold up This bit didn't drill three hole in ceramic tile before the tip broke off.
Date published: 2016-09-20
  • y_2017, m_3, d_21, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_16
  • loc_, sid_202242747, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 21ms
  • REVIEWS, PRODUCT