Free Shipping and BOPIS


Model # TC10

Internet # 203253652

10 in. Wet Tile and Stone Saw

This item has been discontinued.
The Home Depot no longer carries this specific product.

$749.99 /each




Model # TC10

Internet # 203253652

The Bosch TC10 10 in. Wet Tile and Stone Saw features a powerful 1.4 HP and 4200 RPM Motor for cutting a broad range of material including porcelain and stone. Expanded Rear and Side Extension Water Trays - To prevent overspray and optimize water retention. Large Sliding Rubberized Table Work Surface - Rubber coating and large size provide better work piece balance and control; especially large dimensions. 24 in. Max Rip, 18 in. Diagonal Cut Capacity - For precision professional cutting tile and stone. Durable Cast Aluminum Base and Arm - For maximum durability on and off the jobsite.

  • Quick head bevel adjustment, saw adjusts to pre-set 22.5deg and 45deg stops for on-site angle cuts
  • Stainless steel rails and sealed ball bearing casters - for stable, smooth and consistent sliding table travel
  • Rear over-spray deflector - to reduce over-spray and keep water within the tool
  • Tool-free blade guard and arbor lock, for quick and easy blade access and one-wrench blade changes
  • Integrated and removable main water tray - designed with drain plug and designated pump retainer; quickly slides out to drain water or clean
  • Adjustable head plunge, for outlet and vent register cutouts on site
  • Includes: Edge guide, auxiliary table, rear/side extension water tray, water pump, blade wrench, hex wrench, 10 in. diamond blade
  • Home Depot Protection Plan:

    Home Depot Protection Plan

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Blade Thickness 
0.0625 in 
Blade size (in.) 
Product Width (in.) 
Amperage (amps) 
Blade Material 
Cuts Through 
Deck material 
Flooring Product Type 
Tile Tool 
Maximum tile cut size diagonal (in.) 
Maximum tile cut size rip (in.) 
Product Weight (lb.) 
75 lb 
Saw Blade Material 
Tile Saw Features 
Bevel,Plunge,Water Pump,Water Tray 
Tile Tool Type 
Tabletop Tile Saws 
Voltage (volts) 
Warranty / Certifications
Manufacturer Warranty 
1 Year 


Rated 4.7 out of 5 by 10 reviewers.
Rated 5.0 out of 5.0 by Good solid value Saw worked well cutting basalt, rip fence lock was broken when delivered or when I first used it. Water is well contained with all the guards and has cut straight and square without adjustment since assembled after cutting 600 square feet of tile. June 9, 2015
Rated 5.0 out of 5.0 by great wet saw i used to have mk dewalt wet saw and this is the best motor has enough power for any porcelain marble or granit this thing cuts soo perfect with out any chip its unreal as many of the wet saws i use they always chip the tile even though u used teh best blade on market cuz part that holds the engine its not supporting enough so u get the vibration on teh blade whatever the case may be this thing is great cuts perfect every other guy use the bench they say its  litterly glades thru the wetsaw soo its a great product well enginerred great bearing awasome get bosch or go home  January 22, 2014
Rated 5.0 out of 5.0 by very very nice i have only used it 3 times but it cuts really nice and the inch marks on the table are very very close to right on so it cuts down on a lot of time marking on tile just like the rest of the bosch tool i have they are kinda of high in price May 21, 2014
Rated 5.0 out of 5.0 by Smooth working saw After using a 8 inch saw for years this new saw is a dream come true. The miter feature puts this saw above the others. April 12, 2014
Rated 5.0 out of 5.0 heavy duty with precision cuts This wet saw is true beast cuts with out shaking no cips on the tile cuz less vibration and bench that glides like its against gravity best I ever use January 24, 2014
Rated 4.0 out of 5.0 by TC-10 My TC-10 is two weeks old and has only been used on one full bath remodel so it's too early to give a proper review. I had a MK which lasted 17 years, then replaced it with a Ridgid which went to the dump after 4 years. I did a fair amount of research before narrowing it down between the Lackmond and the Bosch which are basically identical except the Lackmond has laser and additional horse power that I don't care about. I've used Bosch tools for 35 years and I'm a fan of most of their tools so I bought the TC-10. What I can say so far is the saw seems well built, I did have to adjust the rails to square the table out of the box but no big deal. I also didn't bother trying the blade that came with it instead put on a new HotDog blade. My opinion after one job is the TC-10 has plenty of power and gave me fast effortless chip free cuts on 12 x 12 porcelain. I like everything about the saw except the weight, this saw is heavy, especially combined with the GTA10W stand! A rolling stand is a must for saws of this size and weight. The design of the Ridgid stand was the only thing I liked about that saw. I was hoping the Bosch stand would be just as nice but it's a totally different setup. The problem I have with the Bosch stand is the wheel design, you can't cart it up and down stairs on just the wheels because of the angle of the wheel supports. The frame scraps down the steps until the wheels touch the next tread, bad design! So I fixed that by reversing the wheel supports and cutting off part of the "wings" that hold the wheel locks. True you do loose the locks and it does make the frame almost 2" longer on those legs so I place a 2 x 4 under the front legs, no big deal, and now it rolls down stairs. I don't know why Bosch engineers didn't catch that, it would have been an easy fix for them before going into production. One other thing I want to mention is the water tray, it would have been nice if there was a fitting for drain hose connection to channel the waste water into a bucket. The only way to do this now is to pull the tray out a few inches and have a bucket next to the stand under the drain hole. Hopefully my next review down the road will be how much I love this TC-10, something tells me I will. March 26, 2014
Rated 5.0 out of 5.0 by works perfectly for all cutting needs that I have. So glad i went with the Bosch, the quality and size of the machine is great for everything I need it to do. November 10, 2013
Rated 5.0 out of 5.0 by Best Wet Tile Saw on Market I am a general contractor and did my due diligence in researching the available portable wet tile saws on the market. I bought this saw 2 weeks ago on line. The saw was quick and easy to assemble. It has a very powerful motor and cuts through porcelain and ceramic tile easily. The unit, like all Bosch tools is well designed. I recommend this tool. May 8, 2013
  • 2015-11-29 T10:32:11.304-06:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_10, tr_10
  • loc_en_US, sid_203253652, prod, sort_default
2 >>