Model # HCBG09T

Internet #100010771

Store SKU #664610

Bosch 5/16 in. x 4 in. x 6 in. BlueGranite Turbo Carbide Hammer Drill Bit for Concrete, Stone, and Masonry Drilling
0000346313499

Bosch

5/16 in. x 4 in. x 6 in. BlueGranite Turbo Carbide Hammer Drill Bit for Concrete, Stone, and Masonry Drilling

$5.68 /each

Frequently Bought Together

Product Overview

The Bosch Blue Granite bit are optimized for drilling in masonry and concrete. It features a revolutionary PowerGrip round shank that eliminates shank slippage and delivers superior performance. The Centric Active tip and the improved flute design ensure precise, fast drilling.

  • Bosch offers a full assortment of masonry and carbide bits as well as chisels for hammer drills, SDS-Plus rotary hammers and demolition hammers
  • Optimized for drilling in masonry and concrete
  • Revolutionary PowerGrip round shank for better grip and superior performance
  • Centric active tip for precise, fast drilling

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

does this drill bit fit in a conventional drill chuck

Asked by: stupid
Yes
Answered by: hammer
Date published: 2017-02-03

is the entire bit 6 in. long or does it have a 6 in. drilling depth?

Asked by: Matt
4.5 inch drill depth
Answered by: hammer
Date published: 2017-02-03

Will this drill holes in clay and ceramic?

Asked by: Kate
Yes, but be sure and tape off the area where you want to drill in ceramic. You need to do this just in case the bit initially "walks" as you make your entry hole. It will cut thru clay like butter!
Answered by: SWong
Date published: 2016-07-17

can i use this bit for tapcon anchors?

Asked by: JJ
Thanks for your question. Yes the bits can be used for drilling into concrete and masonry.
Answered by: BoschTools
Date published: 2016-08-05
  • y_2017, m_3, d_20, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_13
  • loc_, sid_100010771, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 54ms
  • QUESTIONS, PRODUCT

Customer Reviews

5/16 in. x 4 in. x 6 in. BlueGranite Turbo Carbide Hammer Drill Bit for Concrete, Stone, and Masonry Drilling is rated 3.9 out of 5 by 101.
Rated 4 out of 5 by from much better than Tapcon bit I thought Tapcon bits would be good since their screws are so respected for Concrete. Do yourself a favor and get the Bosch to start. a much better bit.
Date published: 2016-12-12
Rated 5 out of 5 by from Good bits at reasonable price. Only 5/32" masonry drill bit I could find in the store that indica... Good bits at reasonable price. Only 5/32" masonry drill bit I could find in the store that indicated it could be used with a hammer drill was this one which was quite a bit longer than I needed to drive in some tapcons. I was a bit worried because it was so thin and long I thought it would snap. Was able to drill through concrete as well as porcelain tiles over concrete. For all the holes I had to pass through some framing lumber first which wasn't an issue. I used a cordless hammer drill with the hammer setting on. The holes in the concrete were easy to make. The ones in the porcelain tile took longer to get started but once they did the holes went in fine. I was pressing down harder over the porcelain to get it going and the bit didn't snap and still looks like it's in good condition after drilling about 10 holes split between the two materials.
Date published: 2017-03-14
Rated 5 out of 5 by from I drilled 4 holes in old concrete and hit a few rocks (you know it when you hit them) but this w... I drilled 4 holes in old concrete and hit a few rocks (you know it when you hit them) but this worked fine. It's less expensive than the Tapcon drill and will probably outlast it. For the money it did the job for me.
Date published: 2017-01-27
Rated 1 out of 5 by from Completely worthless. Tried using for drilling into concrete about... Completely worthless. Tried using for drilling into concrete about 2.5". Barely cut the first hole and then wouldn't do anything on the second hole. Bit tip appear polished and worn after first hole.
Date published: 2017-03-15
Rated 2 out of 5 by from This became really dull really fast. It was also heating up so quickly before we got through the... This became really dull really fast. It was also heating up so quickly before we got through the stone. We had to keep dipping it in cold water to cool it down.
Date published: 2016-11-04
Rated 4 out of 5 by from Bit worked perfectly to create space under a granite countertop... Bit worked perfectly to create space under a granite countertop that allowed installation of a bar height refrigerator.
Date published: 2017-01-31
Rated 5 out of 5 by from This Drill Bit went through the brick like a hot knife through butter and stayed sharp for over 2... This Drill Bit went through the brick like a hot knife through butter and stayed sharp for over 25 holes!
Date published: 2016-12-28
Rated 5 out of 5 by from Great bit. This positively ate through the concrete ceiling in my condo. Even better than Tapco... Great bit. This positively ate through the concrete ceiling in my condo. Even better than Tapcon bit.
Date published: 2017-03-02
  • y_2017, m_3, d_20, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_101
  • loc_, sid_100010771, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 59ms
  • REVIEWS, PRODUCT