Model # HC2001

Internet #100062771

Store SKU #156255

Bosch Bulldog 5/32 in. x 4 in. x 6 in. SDS-plus Carbide Rotary Hammer Drill Bit
0000346280333

Bosch

Bulldog 5/32 in. x 4 in. x 6 in. SDS-plus Carbide Rotary Hammer Drill Bit

$6.27 /each

Frequently Bought Together

Product Overview

The Bosch Blue Granite Bit is optimized for drilling in masonry and concrete. It features a revolutionary PowerGrip TM Round Shank that eliminates shank slippage and delivers superior performance. The centric active tip and the improved flute design ensure precise, fast drilling.

  • Carbide-tip for strength
  • 2 cutter tip is ideal for smaller diameter holes
  • Centric tip creates accurate and rounded holes
  • 4 flute designs provides fast dust removal

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

Holes Too Large?

I bought this to drill some 1/2" holes in brick using a Bosch Bulldog rotary hammer. The holes are too large for a lead anchor that requires a 1/2" hole. The anchor just falls into the hole with no resistance and spins. I tried drilling a smaller pilot hole first but the result was the same. I ended up using a 7/16" drill and hammered the anchors in though this is really not the correct way to do this. I was drilling carefully to avoid wallowing out the hole. I hope a Bosch rep sees this post and can advise me on why this drill cuts the hole too large. If this is by design then I feel I wasted my money.
Asked by: zewkini
I have had the same experience with masonry bits and normally go one size down from the recommended fastener size due to the size of the carbide tip that most masonry drills use.
Answered by: LosRubios
Date published: 2016-09-12

are the carbide drill bits all carbide

Asked by: Anonymous
No. The carbide cutters are attached to a regular steel fluted shank.
Answered by: Roger
Date published: 2017-03-28
  • y_2017, m_4, d_24, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_, sid_100062771, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 25ms
  • QUESTIONS, PRODUCT

Customer Reviews

Bulldog 5/32 in. x 4 in. x 6 in. SDS-plus Carbide Rotary Hammer Drill Bit is rated 3.9 out of 5 by 104.
Rated 5 out of 5 by from These small diameter concrete hammer drill bits are hard to... These small diameter concrete hammer drill bits are hard to find, usually have to order them and pay shipping. This small bit works just fine for drilling pilot holes in a concrete crack for epoxy injection repair. . The fact that the store had them in stock, and at a reasonable price was great.
Date published: 2017-02-08
Rated 5 out of 5 by from I used this to drill holes to mount wood storage racks against a concrete block wall. I used Red-... I used this to drill holes to mount wood storage racks against a concrete block wall. I used Red-Head Hammer Set anchors to secure the square vertical tubes to the wall. With this long drill bit I was able to drill very clean sided holes through the mounting tubes and into the block.
Date published: 2017-03-28
Rated 5 out of 5 by from Only drilled 4 holes so far and it went into the cellar wall with no problem. Used tapcons and h... Only drilled 4 holes so far and it went into the cellar wall with no problem. Used tapcons and holding good. Just keep the drill straight so it doesn't bend and don't force it.
Date published: 2017-03-01
Rated 5 out of 5 by from The Germans are known for producing good quality tools and... The Germans are known for producing good quality tools and assessories. This bit is no exception. Bosch bits generally last longer for me than competing brands. Very satisfied.
Date published: 2017-02-10
Rated 1 out of 5 by from Only ised the bit once, it went about a quarter... Only ised the bit once, it went about a quarter inch into a concrete block and bit was dull. Tried using it later and it wouldnt even penetrate the block
Date published: 2017-04-04
Rated 5 out of 5 by from bored through mortar like butter. Shaft design kept bit from falling into chuck when drilling. S... bored through mortar like butter. Shaft design kept bit from falling into chuck when drilling. Seems like I will get good mileage out of one bit.
Date published: 2016-12-09
Rated 5 out of 5 by from Easy to use, be careful to keep the drilling straight... Easy to use, be careful to keep the drilling straight as not to bend the bit. Have been using over and over agian with no problems.
Date published: 2017-03-28
Rated 5 out of 5 by from Did a great job. Drilled over 150 holes already and... Did a great job. Drilled over 150 holes already and it does not seem to be slowing down. I would definitely purchase again.
Date published: 2017-04-18
  • y_2017, m_4, d_23, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_104
  • loc_, sid_100062771, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 16ms
  • REVIEWS, PRODUCT