Model # SDP001

Internet #202716991

Bosch Multi-X Oscillating Tool Replacement Sanding Pad


Multi-X Oscillating Tool Replacement Sanding Pad

$6.53 /each

Frequently Bought Together

Product Overview

Allows sanding sheets to attach to Bosch Multi-X Oscillating Tools. Accessory interface to the tool is the most important aspect to oscillating multi-tools. Bosch offers solutions for the best fit for today's high torque tools.

  • 3.5 in.
  • Replacement part
  • For use with Bosch MX25 and PS50 tools along with brands that use the Bosch OIS system
  • Made in Germany
  • Hook and loop, 6 holes




More Products With These Features


Customer Questions & Answers

Will this sanding pad fit on my Makita, Model XMT03Z multi tool?

Asked by: DUPHR
No, this will not work on your Makita.
Answered by: CommunityAnswer
Date published: 2016-06-20

replacement velcrow stickempad for a ryobi plam sander

Asked by: Anonymous
Thank you for your question. The SDP001 sanding backing pad is designed for our Bosch MX25 and PS50 Multi Tools, the pad is 3-1/2", with 6 holes hook and loop.
Answered by: BoschTools
Date published: 2015-09-17
  • y_2017, m_4, d_22, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_, sid_202716991, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 20ms

Customer Reviews

Multi-X Oscillating Tool Replacement Sanding Pad is rated 2.2 out of 5 by 5.
Rated 3 out of 5 by from got the job done but... I bought four replacement sanding pads after the first one that came with the tool overheated. The first; "replacement" pad was destroyed within a few minutes. I was able to complete my project by rotating through the remaining three pads at about 1 minute intervals. changing the pads before heat had time to build up to the point of destroying it. excess heat cause by friction causes the hooks to melt and are therefore unable to secure the sandpaper. I might make note however that by the time I got the replacement pads the ambient air emperatures had increased dramatically and may have had some effect on the pads heating so rapidly. I plan to test one of these pads this winter when it is cold just to see how well it holds up.
Date published: 2013-08-15
Rated 1 out of 5 by from Does not hold up. I agree with the first review in that the product does not hold up well. Since the ones I have are no longer able to hold the sandpaper, I went in search of new ones. Went to 2 Home Depots in my area and neither one had the part. The tool is useless without the pad.
Date published: 2012-07-09
Rated 1 out of 5 by from We wanted this to be a great product. we had to buy this new head after using the one that came with the tool after just a day or 2 of using it. The suface of the 1st one melted down as we sanded and then the velcro pads wouldn't stay on. There were no directions, tips, warnings telling us this would happen and how to avoid it if possible. All of the brands seem to have the same design, so we feel stuck with this, unless we just want to go back sanding by hand.
Date published: 2011-11-01
Rated 1 out of 5 by from Only good for a little bit at a time The BOSCH sandpaper backing will stick to and melt to this BOSCH pad. You can peel off the sandpaper backing from the pad when it separates, but a little is left on the pad each time, and the eventual buildup will render the pad useless and unable to hold a new sandpaper sheet after about 20 sheets. You will need to buy a new pad with every box of sandpaper.
Date published: 2013-07-29
Rated 5 out of 5 by from A Must Have! I found out the hard way when I used my sanding pad for the first time I was using too much pressure on it and it melted so I only used it once, Since I bought a couple of these and now learned not to put any pressure on them just let the sander do the work I have many hours on one pad so far and still working great so I have now 1 for a spare.
Date published: 2014-11-07
  • y_2017, m_4, d_21, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_, sid_202716991, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 15ms