0000346454321

Bosch

Model # GLL 2-45

Internet # 204108288

Store SKU # 1000010440

Self-Leveling Long-Range Cross-Line Laser

Was  $199.00
$179.00 /each

Save $20.00 (10%)

  • Robust overmold housing protects unit in tough conditions
  • Accurately measures within 1/4 of an inch up to 100 ft
  • Laser can be used in horizontal, vertical and cross-line modes

Frequently Bought Together

Product Overview

The Bosch GLL2-45 Self-Leveling Long-Range Cross-Line Laser features horizontal, vertical and cross-line modes. It projects two lines independently or together for a wide array of level and/or alignment applications. The self-leveling laser is accurate to within 1/4 in. at 100 ft. with a 65 ft. working range and has an IP54 rating designed to withstand dust and precipitation at a job site.

  • Includes BM 3 positioning device, laser target, 3 AA batteries and belt pouch
  • Self-levels, senses and indicates out-of level condition
  • Pulse laser receiver mode for use with separately sold LR2 laser receiver at long distances (up to 165 ft.) and/or in bright lighting
  • Includes BM3 positioning device with retractable feet, strong magnets and ceiling grid clamp
  • Highly visible laser lines project at 130 degrees horizontal and 160 degrees vertical fan angles
  • Automatically shuts off after 30 minutes of inactivity
  • IP54-rated for water and dust resistance
  • 2-year limited warranty
  • Great solution for laser tools needs

    LaserLevels

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Product Depth (in.) 
7.375 
Product Height (in.) 
3.125 
Product Length (in.) 
8.875 
Product Width (in.) 
9.125 

Details

Batteries Included 
Yes 
Battery Type Required 
AA 
Hand Tool Type 
Laser Level 
Includes wireless remote control 
No 
Indoor/Outdoor 
Indoor/Outdoor 
LED Display 
No 
Number of Batteries Required 
Number of beams 
Reconditioned 
No 
Returnable 
90-Day 
Tools Product Type 
Hand Tool 
Waterproof 
No 

Warranty / Certifications

Manufacturer Warranty 
2 Years 

More Products With These Features

Search

Customer Questions & Answers

11 Questions28 Answers

Customer Questions & Answers

Self-Leveling Long-Range Cross-Line Laser
Self-Leveling Long-Range Cross-Line Laser

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
8 answers

do it set on the floor instead of the wall

This question is from Self-Leveling Long-Range Cross-Line Laser
Asked by
poky
Las Vegas Nv
September 1, 2013
I install wire shelves in closes at a height of 68 inches and the lowes at 12 inches from the floor and i need lines on each side walls to mount the clams. All the walls or drywall and i don;t want to mount to the drywall.Is it possible to make lines on the back wall to space 5 or 6 clamps equal space apart to hold the shelves.Is there a cheper model that do the same thing. I work piece work and need to save time.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (8)

Asked by
SC
Read all my Q&A
Home Improvement Profile: DIYer
August 10, 2015
Answer: 
You can set it on a tripod.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Las Cruces Naw Mexico
Read all my Q&A
July 9, 2014
Answer: 
Used for furr downs also acoustical ceiling grid screw used to adjust elevation is great magenets could be a little strongerto set on 5/8'' sheetrock on metal studs
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Texas
Read all my Q&A
Home Improvement Profile: DIYer
March 26, 2014
Answer: 
There are vertical and horizontal lines that cross each other. The horizontal line will be projected at the same level as the unit and the vertical should have no problem reaching from floor to ceiling at a foot from the wall. Hope that is what you were asking.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Midwest USA
Read all my Q&A
January 28, 2014
Answer: 
Poky it's not clear exactly what you're asking about but if finding something to position the level up off the floor's your goal, look for an inexpensive camera tripod of some kind. That's what I use when there's nothing made of steel handy that the magnetic support accessory can be stuck onto.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Liverpool, NY, USA
Read all my Q&A
October 15, 2013
Answer: 
We used a tripod. However I believe it can attach to a wall or sit on floor.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
MI
Read all my Q&A
September 22, 2013
Answer: 
This laser would be very handy for this task. I would set the laser on something off the ground. Height of the laser is not specific, just get it off the floor closest to your lowest mark. If you need 12" off the floor, and the laser is put on an object(say a bucket) which is 20" off the ground. That is an 8" difference. All you have to do is measure 8" down from the laser on each side, now you have your Read More
This laser would be very handy for this task. I would set the laser on something off the ground. Height of the laser is not specific, just get it off the floor closest to your lowest mark. If you need 12" off the floor, and the laser is put on an object(say a bucket) which is 20" off the ground. That is an 8" difference. All you have to do is measure 8" down from the laser on each side, now you have your marks for your first set of "clamps". It's a lot easier and quicker than trying to get the level at the exact spot you need, which you can do, but time is money!! Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
September 3, 2013
Answer: 
Thank you for your question. The Bosch GLL2-45 can also be mounted to a tripod, it has a standard 1/4"-20 tripod mount.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Home owner from Boston
Read all my Q&A
September 2, 2013
Answer: 
It has a small tripod but it's no tall enough for an 11" line. You could get a tripod for the top line but I doubt it would get small enough for the bottom line. You'll have to figure out a solution for any laser you get, though. If is always 11" you could simply make a wooden block to sit it on that's the right height and you've solved that problem. Then get a cheap lightweight tripod for the top line.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
6 answers

Does this laser have slope capability

This question is from Self-Leveling Long-Range Cross-Line Laser
Asked by
Marysville, Washington
Read all my Q&A
July 18, 2014
Can it be set to match the slope where a fence is going? I would like to use this outside to line up my fence both vertically and horizontally. The ground has a slope so fence has to match that horizontally..
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (6)

Asked by
SC
Read all my Q&A
Home Improvement Profile: DIYer
January 15, 2015
Answer: 
You can lock the laser and adjust it to an angle.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

November 5, 2014
Answer: 
Yes it does.. you have to put it in the LOCK position and it will blink saying it is not LEVEL... but it will work
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Indianapolis, IN
Read all my Q&A
Home Improvement Profile: Professional
October 18, 2014
Answer: 
You can lock the laser and manually angle it, but you can't tell it a slope to automatically find it. I've painted slopes for ramps and fences by measuring an marking both ends, then used the laser to place pieces along the way.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Morgan Hill, CA
Read all my Q&A
Home Improvement Profile: DIYer
September 2, 2014
Answer: 
No. If you have a surveyors stick of some kind, you could figure out slope by checking change in height over a certain distance.
I did the drain pipes for my back yard that way and it was certainly good enough for that.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
July 21, 2014
Answer: 
Thank you for your question. The GLL2-45 is designed for both indoor and outdoor use and is capable of simultaneous horizontal and vertical alignment.
-3points
0out of 3found this answer helpful.
Was this helpful?helpful0unhelpful3

Asked by
Louisburg, Kansas
Read all my Q&A
Home Improvement Profile: DIYer
July 20, 2014
Answer: 
this laser can the lock to a fixed position then rotated to whatever slope you desire. Though if you're going to use that out side you will have to have a detector because the line is not bright enough to see outside. But if you wait till it gets dusk then you will be able to see it
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
4 answers

Can you tilt it up higher and have it self level?

This question is from Self-Leveling Long-Range Cross-Line Laser
Asked by
Los Angeles, California
Read all my Q&A
October 15, 2014
I used another level that you could tilt up on a tripod and it would self level at the height you pointed it at for a vertical line. I just bought this one and it seems you have to have it at the height you want the laser line to be. When I tilt it up it blinks, which means it is beyond its capability I guess...
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
SC
Read all my Q&A
Home Improvement Profile: DIYer
January 15, 2015
Answer: 
It self levels only so far. You can tilt it but only to a certain degree.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Haverhill, MA
Read all my Q&A
December 29, 2014
Answer: 
you can only go to a certain angle... but it is self leveling ...
you can't tilt it too much...
as soon it stop blinking you are all set...
enjoy
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
October 21, 2014
Answer: 
You cannot tilt a self level laser past it's leveling point. That is why it flashes to let you know it is not level.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Indianapolis, IN
Read all my Q&A
Home Improvement Profile: Professional
October 18, 2014
Answer: 
It has to be within a certain range of level to self level. This is in the single digit degrees. That blinking is that you are at your max angle. To get a higher horizontal line, you need to raise the unit on a tripod. The vertical line covers everything thing I've needed with a low tripod.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

How far can this laser be seen outside?

This question is from Self-Leveling Long-Range Cross-Line Laser
Asked by
Seattle, WA
Read all my Q&A
August 7, 2015
I'd like to know roughly speaking what the distance limits are outside.

My immediate project is a 100' (but low) block wall that should be level. Of course, I don't need 100' in one long shot, but some reviews of laser levels seem to indicate significant distance limits in sunlight.

Or, just tell me to stick with my trusty non-laser levels!!

Thanks for your help!
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
August 10, 2015
Answer: 
Thank you for your question. In bright light conditions we recommend wearing laser glasses which will enhance the laser line for easier viewing. The working range is 65 feet however if you use the optional LR2 laser receiver it will work up to 150 feet. We encourage you to try the laser and if you are not satisfied we do have an unconditional 30 day money back guarantee on our products.
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0

Asked by
SC
Read all my Q&A
Home Improvement Profile: DIYer
August 10, 2015
Answer: 
Sunlight is a challenge for lasers. This one has an accessory that helps you see the laser in light. When the beam hits it you can see it better.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
2 »
  • 2016-07-18 T15:55:17.953-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_204108288, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 252ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.2 out of 5 by 31 reviewers.
Rated 2.0 out of 5.0 by Magnets eventually fall off. Magnets fall off . And it's rendered floor operation only .pretty sad have been looking for replacement magnet and not able to find them. June 30, 2016
Rated 1.0 out of 5.0 by Cheap mount Laser works fine but the magnets fall out of the mount constantly. Once both magnets are lost you are left with a perfectly good but uselesslevel. May 16, 2016
Rated 2.0 out of 5.0 by Returning Today This is useless outdoors unless it is almost dark. Directions are just as useless. May 16, 2016
Rated 2.0 out of 5.0 by NOT FOR DAYLIGHT USE Purchased this laser thinking it would be clear at 15 ft. IT IS NOT. It was outside and was in the daylight but mostly in a shady area. The machine was not visible at even 7 to 8 ft. It is for interior use only and not usable outside at all. They say up to 150 ft but I would not trust that to be accurate even inside. May 13, 2016
Rated 5.0 out of 5.0 by Works great I bought this product because I had 6 pre-hung doors to install. Using levels it used to take me ~30 to install a door. Using this self-leveling laser I was able to install a door ~10 minutes. This product will pay for itself in only a few jobs. April 12, 2016
Rated 5.0 out of 5.0 by Awesome Product I used it right out the box after I installed the batteries. Worked as advertised. It saved me a lot of time. April 5, 2016
Rated 5.0 out of 5.0 by Impressive Laser The coverage of the laser is amazing. If you set it up on one wall it projects a line that almost entirely covers the other three walls. The beam is really bright making it easy to see and if you don't have the laser in the acceptable level range it pulses on and off to warn you. It projects a horizontal and vertical line at the same time or projects the two lines individually. This device is ideal for installing moldings, pictures and cabinets for the home owner. It has endless uses for construction with its long range capabilities. I recommend this laser and also suggest getting a tripod for it. It makes using it much easier. July 4, 2013
Rated 5.0 out of 5.0 by Laser Crosshair Level Tool Very nice! crosshair laser level. A professional grade tool that will help you obtain excellent project results. March 1, 2016
  • 2016-07-12 T14:15:18.540-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_31, tr_31
  • loc_en_US, sid_204108288, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 66ms
  • REVIEWS, PRODUCT