BrassCraft 1/2 in. MIP x 1/2 in. FIP x 48 in. Safety+PLUS Gas Appliance Connector with Excess Flow Valve 5/8 in. OD (106,000 BTU)-CSSC45E-48 X5 at The Home Depot
Free shipping


Model # CSSC45E-48 X5

Internet # 100643838

Store SKU # 692799

1/2 in. MIP x 1/2 in. FIP x 48 in. Safety+PLUS Gas Appliance Connector with Excess Flow Valve 5/8 in. OD (106,000 BTU)

BrassCraft 1/2 in. MIP x 1/2 in. FIP x 48 in. Safety+PLUS Gas Appliance Connector with Excess Flow Valve 5/8 in. OD (106,000 BTU)

This item has been discontinued.
The Home Depot no longer carries this specific product.

$24.85 / each
Item cannot be shipped to the following state(s): GU,PR,VI


Model # CSSC45E-48 X5

Internet # 100643838

Store SKU # 692799

BrassCraft’s Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Our stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. ProCoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.

California residents: seeProposition 65 information

  • 1/2 in. ID (5/8 in. OD) corrugated stainless steel with corrosion resistant coating
  • Safety+PLUS Excess Flow Valve protects against gas fires and explosions - 1/2 in. MIP connection to gas supply or gas ball valve
  • Safety+PLUS valve works with all common household gas appliances
  • Safety+PLUS valve features automatic activation and reset
  • Safety+PLUS valve is 100% factory performance tested
  • Safety+PLUS valve installs like a standard gas fitting; can be installed in vertical or horizontal position
  • ProCoat coating resistant to ammonia, chlorine, solder flux, muriatic acid, as well as UV rays and salt
  • Use with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures
  • Gas connectors is 100% leak tested
  • Approved for indoor and outdoor use
  • Temperature rating: 32° to 150° F
  • Pressure rating: standard line pressures up to 1/2 psi maximum
  • Designed, Machined, and Assembled in the USA
  • CSA certified

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Assembled Depth (in.)  1.250 in  Assembled Height (in.)  48.97 in 
Assembled Width (in.)  1.25 in  Certifications and Listings  CSA Listed 
Connection type  FIP x MIP  Gas Vent Pipe and Fittings Accessory Type  Gas Appliance Connector 
Inner diameter (in.)  0.5  Inner material  Stainless steel 
Manufacturer Warranty  LIMITED MANUFACTURER WARRANTY. See  Maximum Pressure (psi)  0.5 
Maximum Working Temperature (F)  150  Minimum working temperature (F)  32 
Outer diameter (in.)  0.625  Outer material  Stainless steel 
Product Length (in.)  48 in  Product Weight (lb.)  1.1606 lb 
Returnable  90-Day 



Standard Shipping includes delivery by small parcel service. Processing time varies by product.

Orders for this item may be expedited for an additional fee.

Other Delivery Options:

Express and Expedited shipping options are also available. Estimated arrival times are available in checkout.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.