BrassCraft 1/2 in. Nom Comp Inlet x 3/8 in. O.D. Comp Outlet 1/4-Turn Straight Valve-G2CR14X C1 - The Home Depot


Model # G2CR14X C1

Internet # 202047046

Store SKU # 241581

1/2 in. Nom Comp Inlet x 3/8 in. O.D. Comp Outlet 1/4-Turn Straight Valve

BrassCraft 1/2 in. Nom Comp Inlet x 3/8 in. O.D. Comp Outlet 1/4-Turn Straight Valve

This item has been discontinued.
The Home Depot no longer carries this specific product.

$8.98 / each


Model # G2CR14X C1

Internet # 202047046

Store SKU # 241581

BrassCraft 1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures - faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a 90 degree turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

  • Compatible with copper or PEX (PEX installations require a stainless steel tube insert)
  • Smooth, quarter-turn operation, on/off flow control with a 90 degree turn of the handle
  • 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use
  • Easy-to-remove handle protects against accidental operation during rough-ins
  • 1-piece body construction for strength, durability and long-lasting performance
  • Chrome-plated brass
  • Temperature rating: 40° to 140° F
  • Pressure rating: 125 psi maximum
  • No-lead certified
  • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1
  • Designed, machined and assembled in the USA

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Assembled Depth (in.)  1.1875 in  Assembled Height (in.)  2.75 in 
Assembled Width (in.)  2.25 in  Product Height (in.)  1.1875 
Product Length (in.)  2.75 in  Product Width (in.)  2.25 in 
Valve Inlet Diameter (in.)  .5  Valve Outlet Diameter (in.)  .375 
Compatible Pipe Material  Copper  Connection  Comp x Comp 
Indoor/Outdoor  Indoor,Outdoor  Material  Brass 
Maximum Pressure (psi)  125  Maximum Working Temperature (F)  140 
Product Weight (lb.)  .24015 lb  Rating  125 psi 
Returnable  90-Day 
Warranty / Certifications
Manufacturer Warranty  Limited Manufacturer Warranty 


Rated 4.9 out of 5 by 12 reviewers.
Rated 5 out of 5 by Great product I had to replace the shut off valve in our kitchen sink when I replaced out faucet. We have well water and is very hard. I am assuming that with the hard water and rust, the valve finally gave in. When replacing the faucet, I was able to shut the valves, but when turning them back on, it started to leak. No amount of tightening helped. So I decided it was time for these valves to be replaced. I replaced both hot and cold valves, even though only the hot was leaking. It went in well - I had to use the existing nut on the old valve and it fit nicely. No leaks and it looks nice. And it's only a quarter turn valve, not like the old valve where it was like a screw valve, requiring several turns. I guess because of our water, it would be a good maintenance to turn these valves on and off at least once a year. March 14, 2014
Rated 5 out of 5 by Used these for under kitchen sink supply lines We recently replaced our kitchen faucet, and the old shutoff valves were leaky & very corroded. I didn't fell like soldering new valves in, and my friend recommended these compression type 1/4 turn valves. I cut off the old valves (I had plenty of pipe coming up from the bottom of the cabinet). These worked very well. Just make sure that you clean & smooth the ends of the pipe where the valve will connect really good with steel wool or 150 grit sandpaper, the ferrule has to slide into the valve. Another trick is to put a small dab of Teflon pipe dope around the ferrule before screwing on the ferrule nut and tightening, this keeps the ferrule from binding and not tightening properly. Never over-tighten, tighten only so there is no dripping. October 7, 2014
Rated 5 out of 5 by The valve's compact size and quick on/off capability were appreciated. Having a ball valve mechanism rather than the typical threaded multiturn type gate or washer valve makes this shut-off valve most desirable; only 1/4 turn from full on to off. October 23, 2012
Rated 4 out of 5 by Easy to install. Was surprised the inner part was plastic Good quality valve. Though I was surprise that for a quarter turn valve that the inside component was plastic. I was expecting metal, but it was plastic. The rest of the valve was good heavy metal. Very sturdy durable feel to them. Other than that very easy to install and use to replace the old valves where the neoprene washer had deteriorated and the valve would not shut off the water properly. Suggest you have at a minimum two crescent adjustable wrenchs. One to hold the body of the valve and the other to tighten the connection nuts. So don't forget to use teflon tape or you will have the little drips when you tighten the compression nuts. With teflon tape you don't have to tighten so hard. Also clean out your faucet aerator cause it will also be clogged from the deteriorated washer of the old valve you are replacing. March 27, 2013
Rated 5 out of 5 by I like the compact design. Seems to be working fine. Having never installed this sort of thing before, I did get sprayed in the face and had water exploding out of it bec. I didn't know how tightly to screw it in. But, that was my issue, not the product. December 18, 2013
2 >>


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

Orders for this item may be expedited for an additional fee.

Other Delivery Options:

Express and Expedited shipping options are also available. Estimated arrival times are available in checkout.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.