Model # OCR19X R1

Internet #202047060

Store SKU #389685

BrassCraft 1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression Outlet Multi-turn Angle Valve
0026613135762

BrassCraft

1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression Outlet Multi-turn Angle Valve

$7.29 /each

Frequently Bought Together

Product Overview

BrassCraft 1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression Outlet Multi-Turn Angle Valve controls water flow to household plumbing fixtures - faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a few turns of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without turning off water to the entire home.

  • Compatible with copper or PEX (PEX installations require a stainless steel tube insert)
  • Machined, 1-piece body construction for strength, durability and long-lasting performance
  • Easy-to-remove handle protects against accidental operation during rough-ins
  • Multi-turn operation means water flow control with only a few turns of the handle
  • Oval-knurled handle provides a secure grip for on/off operation
  • Rough brass
  • Temperature rating: 40° to 140°F
  • Pressure rating: 125 psi maximum
  • No-lead certified
  • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Is there which side is input and which side is output? And can i use with connector pipe?

Asked by: min77
Hi min77, the 1/2 in. nominal compression end is the inlet. It connects to the water supply pipe sticking out of your wall. This valve is compatible with 1/2 in. copper pipe. This can also be installed on 1/2 in. PEX tube when installed with a steel compression tube insert. The outlet if 3/8 in. OD compression and can be installed with a 3/8 in. OD riser - copper or PEX (w/ an insert) OR a flexible connector. Should you have any additional questions please do not hesitate to ask. Call us toll-free at 877-272-7755.
Answered by: BrassCraft Mfg
Date published: 2016-01-19

how to install OCR19X R1 Multi-Turn Angle valve

cannot stop a leak when installing
Asked by: Anonymous
Roaminggal, Thank you for your question. In the absence of more detailed information about your installation issue we are attaching general installation instructions for a Multi-Turn valve below. Please feel free to give a call to our Product Experts at 877-272-7755 who will gladly walk you through the installation process.
Answered by: BrassCraft Mfg
Date published: 2015-09-20
  • y_2017, m_4, d_24, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_, sid_202047060, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 86ms
  • QUESTIONS, PRODUCT

Customer Reviews

1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression Outlet Multi-turn Angle Valve is rated 3.8 out of 5 by 5.
Rated 5 out of 5 by from This angle valve is of good quality and should last a long time. I replaced a push pull builder g... This angle valve is of good quality and should last a long time. I replaced a push pull builder grade valve with this angle valve. The handle seems to turn smoothly without any issue. Just make sure you tighten the valve per instructions supplied in the box. Finally, the brass finish looks nice on my new faucet and new supply lines. I would certainly recommend this angle stop to a fellow diy'er.
Date published: 2017-03-09
Rated 1 out of 5 by from This is a good looking valve , all brass and made in USA. What could go wrong? Unfortunately, th... This is a good looking valve , all brass and made in USA. What could go wrong? Unfortunately, the valve stem, the key functional component, is made of plastic and will fail all to soon. Plastic valve stems usually cause premature freeze-up or catastrophic failure resulting in flooding. This seemingly nice valve is no better than a cheap unit made of pot metal.
Date published: 2017-01-03
Rated 5 out of 5 by from Good quality, easy to install. Good quality valve. Easy to install to replace old valves that were dying.
Date published: 2014-09-19
Rated 4 out of 5 by from Feels strong and durable Hey, its all brass, worth the price, no plastic on the outside. Probably will last 15 years or more.
Date published: 2014-01-14
Rated 4 out of 5 by from Plumbing Parts I always find what I need at Home Depot in the plumbing department
Date published: 2013-08-27
  • y_2017, m_4, d_24, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_, sid_202047060, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 87ms
  • REVIEWS, PRODUCT