0026613089331

BrassCraft

Model WB00-18N

Internet #203871937

3/4 in. FIP x 3/4 in. FIP x 18 in. Copper Water Heater Connector 7/8 in. OD

$10.97 /each

Frequently Bought Together

Product Overview

Corrosion is no match for BrassCraft’s COPPER-FLEX water heater connectors. Constructed of seamless copper tubing, Copperflex water heater connectors are the professional’s choice for water heater installations. Featuring an integrated dielectric sleeve, the sleeve isolates dissimilar metals within the waterway, where galvanic and electrolytic corrosion have their greatest potential. This separation provides complete protection against galvanic corrosion that can deteriorate the connector and cause leaks. In addition, the integrated dielectric sleeve eliminates the need to install an additional dielectric union, reducing time and installation costs.

California residents: see   Proposition 65 information

  • Integrated dielectric sleeve isolates dissimilar metals within the waterway, where galvanic and electrolytic corrosion have their greatest potential
  • No dielectric union needed, the integrated dielectric sleeve eliminates the need to install an additional dielectric union, reducing time and installation costs
  • Requires less torque to seal with a pliable Nitrile rubber washer, especially on rough nipple surfaces
  • Use with electric or gas water heaters or softeners. Use only to connect water
  • Engineered and tested for harsh water conditions
  • Temperature Rating: 40° to 180° F (NSF61 maximum 82° C)
  • Pressure Rating: water pressures up to 125 psi maximum
  • Designed, Machined and Assembled in the USA
  • CSA and IAPMO certified
  • NSF 61 and no-lead certified

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

3 Questions4 Answers

Customer Questions & Answers

3/4 in. FIP x 3/4 in. FIP x 18 in. Copper Water Heater Connector 7/8 in. OD
3/4 in. FIP x 3/4 in. FIP x 18 in. Copper Water Heater Connector 7/8 in. OD

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
2 answers

Does this connector has a rubber gasket inside?

This question is from 3/4 in. FIP x 3/4 in. FIP x 18 in. Copper Water Heater Connector 7/8 in. OD
Asked by
Read all my Q&A
February 25, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

February 29, 2016
Answer: 
Thank you for the question. This connector includes a pre-inserted washer on each end of the connector. If you have additional questions about the connector or its installation, please do not hesitate to contact our customer support team toll-free at 877-272-7755.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

February 27, 2016
Answer: 
Yes, the inlet has a rubber washer.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Can this pipe be used on PVC with dope glue?

This question is from 3/4 in. FIP x 3/4 in. FIP x 18 in. Copper Water Heater Connector 7/8 in. OD
Asked by
Fernandina Beach FL
Read all my Q&A
June 4, 2016
Trying to disconnect softener unit. Original unit loop and pipe connection and loop connected with PVC
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

June 20, 2016
Answer: 
Thank you CT for the question. This product can be used with a PVC piping system only with an adapter. The Home Depot Store carries a push on adapter SKU # 280464. If you have any questions on the installation of connector, please feel free to contact our customer support team toll-free at 877-272-7755.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Is the inner hose rubber or all copper?

This question is from 3/4 in. FIP x 3/4 in. FIP x 18 in. Copper Water Heater Connector 7/8 in. OD
Asked by
Read all my Q&A
November 5, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

November 6, 2015
Answer: 
Hi Ben- thank you for the question. The corrugated tube on these connectors are constructed of copper - end to end. What you may be seeing on the inlet or outlet of the connector is either the washer - which is indeed rubber - that seals the connection to the pipe nipple. Or our patented internal dielectric sleeve. This engineered polymer sleeve helps separate dissimilar metals (steel and copper) within Read More
Hi Ben- thank you for the question. The corrugated tube on these connectors are constructed of copper - end to end. What you may be seeing on the inlet or outlet of the connector is either the washer - which is indeed rubber - that seals the connection to the pipe nipple. Or our patented internal dielectric sleeve. This engineered polymer sleeve helps separate dissimilar metals (steel and copper) within the waterway to avert internal corrosion of the system. Let us know if you have any additional questions. You can call us toll-free at 877-272-7755 if you do. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-08-24 T15:03:52.692-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203871937, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 37ms
  • QUESTIONS, PRODUCT

Customer Reviews

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 65ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;