0039166081714

BrassCraft

Model # PSSC-63

Internet # 100201149

Store SKU # 145900

5/8 in. O.D. Flare (15/16-16 Thread) x 1/2 in. MIP Steel Gas Fitting

$4.37 /each

Frequently Bought Together

Product Overview

BrassCraft's Steel Male Gas Fitting adapts gas connector nut to appliance inlet or gas supply. These fittings are manufactured from solid bar stock for a seamless, durable design. The flared end of the fitting connects to the gas connector nut. The female end connects to the gas appliance inlet, gas ball valve or gas supply stub out. Fitting is used with 5/8 in. O.D. gas connectors for appliances with larger BTU demands such as a 5 or 6 burner stove, furnace or boiler.

  • Use with 5/8 in. O.D. gas connectors
  • Steel with corrosion resistant coating
  • For use with natural, manufactured, mixed, liquefied petroleum gases and LP gas-air mixtures
  • Temperature rating: -40° to 150°F
  • Pressure rating: standard line pressures up to 1/2 psi maximum

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Inner diameter (in.) 
0.5 
Outer diameter (in.) 
0.625 
Product Depth (in.) 
1.22 
Product Height (in.) 
6.8 
Product Length (in.) 
6.8 
Product Width (in.) 
3.188 

Details

Connection type 
Flare x MIP 
Gas Vent Pipe and Fittings Accessory Type 
Gas Fitting 
Inner material 
Stainless steel 
Maximum Pressure (psi) 
0.5 
Maximum Working Temperature (F) 
150 
Minimum working temperature (F) 
-40 
Outer material 
Stainless steel 
Product Weight (lb.) 
.19056 lb 
Returnable 
90-Day 

Warranty / Certifications

Certifications and Listings 
CSA Listed 
Manufacturer Warranty 
Limited Manufacturer Warranty 

More Products With These Features

Search

Customer Questions & Answers

1 Question2 Answers

Customer Questions & Answers

5/8 in. O.D. Flare (15/16-16 Thread) x 1/2 in. MIP Steel Gas Fitting
5/8 in. O.D. Flare (15/16-16 Thread) x 1/2 in. MIP Steel Gas Fitting

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
 
2 answers

Correct fit/connection?

This question is from 5/8 in. O.D. Flare (15/16-16 Thread) x 1/2 in. MIP Steel Gas Fitting
Asked by
Read all my Q&A
February 26, 2014
Yesterday I purchased the "BrassCraft" Gas Connector - ⅝". Will work on my gas stub out but does not fit into my ½" fitting on my Weber grill hose. Will this connector "step down" the fitting size from the ⅝" flange connection on the yellow hose to a ½" screw in fitting to my grill hose???

Bob
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Novi, Michigan
Read all my Q&A
February 28, 2014
Answer: 
Bob55,
Thank you for your question. You mentioned that you are connecting a BrassCraft connector to a hose. Our gas connectors are intended for direct connection to the appliance regulator. National fuel gas codes prohibit a hose-to-hose installation. To make sure you safely install your gas grill, we recommend you call our Product Experts at 877-272-7755 who can help you select the right parts for the Read More
Bob55,
Thank you for your question. You mentioned that you are connecting a BrassCraft connector to a hose. Our gas connectors are intended for direct connection to the appliance regulator. National fuel gas codes prohibit a hose-to-hose installation. To make sure you safely install your gas grill, we recommend you call our Product Experts at 877-272-7755 who can help you select the right parts for the installation. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Atlanta, GA
Read all my Q&A
Home Improvement Profile: Professional
February 28, 2014
Answer: 
Hi Bob55,
I'm Travis from The Home Depot. Thanks for visiting our site.
The quick connect coupling that is supplied with the natural gas hose for your Weber is intended to connect directly to the hard gas line from your home.
The termination of that hard supply line will determine what fitting is necessary to adapt to the 1/2'' pipe threads of the Weber quick connect coupling.
1/2'' MIP (Male Iron Read More
Hi Bob55,
I'm Travis from The Home Depot. Thanks for visiting our site.
The quick connect coupling that is supplied with the natural gas hose for your Weber is intended to connect directly to the hard gas line from your home.
The termination of that hard supply line will determine what fitting is necessary to adapt to the 1/2'' pipe threads of the Weber quick connect coupling.
1/2'' MIP (Male Iron Pipe) thread is required for the Weber connector and if, as you stated above, the 5/8'' OD Flare fits your gas line termination fitting, this should be the fitting for you.
Some Weber gas lines use a 3/8'' MIP pipe thread fitting, so be sure of the sizes being utilized.
Double check the threads on your line from the house and take the quick connect coupling with you to the Home Depot where a plumbing associate will be glad to help you.
Thank you for asking,
-Travis Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-07-25 T19:43:20.854-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100201149, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 60ms
  • QUESTIONS, PRODUCT

Customer Reviews

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 71ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;