Model # 12S452-0049-F8

Internet #205158165

Briggs & Stratton 900 Series INTEK Horizontal Gas Engine
0024847182507

Briggs & Stratton

900 Series INTEK Horizontal Gas Engine

$33799 /each

Product Overview

Briggs & Stratton builds the engines most of America’s best leading power equipment brands depend on. We’re also the engine most preferred by consumers nearly 60 million households trust their yard care to Briggs & Stratton power. America’s most-trusted brands count on Briggs & Stratton power to stand behind their promise of performance. We know what it’s like to have your name on the line. For more than 100 years, we’ve been living up to ours.
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

Briggs & Stratton builds the engines most of America’s best leading power equipment brands depend on. We’re also the engine most preferred by consumers nearly 60 million households trust their yard care to Briggs & Stratton power. America’s most-trusted brands count on Briggs & Stratton power to stand behind their promise of performance. We know what it’s like to have your name on the line. For more than 100 years, we’ve been living up to ours.
  • Horizontal engine
  • Dura-bore cast iron cylinder sleeve withstands wear and abuse while providing improved oil control
  • Maintenance-free magnetron electronic ignition for quick, dependable starts
  • Float-feed carburetor
  • Dual-clean premium air filter
  • Overhead valve design (OHV) for cooler operation
  • Flow-tek flywheel design
  • Self-lubricating heavy-duty bearing of steel-backed teflon-coated bronze to withstand load and reduce wear
  • Recoil start with auto compression release
  • Gear shaft: 3/4 in. Dia x 2 in. L, 6:1 gear reduction, CCW rotation, keyway

Product Overview

Briggs & Stratton builds the engines most of America’s best leading power equipment brands depend on. We’re also the engine most preferred by consumers nearly 60 million households trust their yard care to Briggs & Stratton power. America’s most-trusted brands count on Briggs & Stratton power to stand behind their promise of performance. We know what it’s like to have your name on the line. For more than 100 years, we’ve been living up to ours.

  • Horizontal engine
  • Dura-bore cast iron cylinder sleeve withstands wear and abuse while providing improved oil control
  • Maintenance-free magnetron electronic ignition for quick, dependable starts
  • Float-feed carburetor
  • Dual-clean premium air filter
  • Overhead valve design (OHV) for cooler operation
  • Flow-tek flywheel design
  • Self-lubricating heavy-duty bearing of steel-backed teflon-coated bronze to withstand load and reduce wear
  • Recoil start with auto compression release
  • Gear shaft: 3/4 in. Dia x 2 in. L, 6:1 gear reduction, CCW rotation, keyway

Specifications

Dimensions

Product Depth (in.)
18
Product Height (in.)
17
Product Width (in.)
20

Details

Engine Part Type
Engine
Engine Part Type
Engine
Part Type
Engine Part
Returnable
90-Day

Warranty / Certifications

Manufacturer Warranty
Consumer Use: 2 Years / Commercial Use: 1 Year

Specifications

Dimensions

Product Depth (in.)
18
Product Height (in.)
17
Product Width (in.)
20

Details

Engine Part Type
Engine
Engine Part Type
Engine
Part Type
Engine Part
Returnable
90-Day

Warranty / Certifications

Manufacturer Warranty
Consumer Use: 2 Years / Commercial Use: 1 Year

More Products With These Features

Search

Questions & Answers

what is actual horse power rating

Asked by: unknown
This engine is 9.00 Gross Torque. They are not rated by HP anymore.
Answered by: CommunityAnswer
Date published: 2016-07-03

How much is a new muffler?

Asked by: bigbugna
Thank you for your recent inquiry with The Home Depot, bigbugna. We do not offer a replacement muffler for this engine. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot.
Answered by: THDSupport
Date published: 2016-10-21

how do i start the engine?

Asked by: tlatenchi
Please refer to your manual and parts list.
Answered by: Briggs & Stratton
Date published: 2015-09-20
  • y_2017, m_9, d_20, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_, sid_205158165, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 34ms
  • QUESTIONS, PRODUCT

Customer Reviews

900 Series INTEK Horizontal Gas Engine is rated 2.8 out of 5 by 17.
Rated 2 out of 5 by from I bought a Husvarna FT900 rototiller that was advertised as MADE IN USA only to find out that this engine is made in CHINA....... how decietfull..... I bought this machine because it had a B/S engine..I did not want a Cub Cadet or MTD or Troybilt. Its common knowledge their rngines are Chinese. I ve worn out many B/S engines in my life time and have always been satisfied with their peformance. I spent the money to buy what I thought was quality only to be deceived. SHAME on you B/S all yor advertising and Co history talk about MADE IN USA. I AM VERY DISSAPOINTED. We ll see how it holds up.
Date published: 2012-02-22
Rated 1 out of 5 by from china motor is junk!!!! I bought my first briggs product at 10 and began making money with it. Reliability was always number 1 throughout the years as I have owned numerous briggs powered pieces of equipment. THEN CAME THE 900DRT HUSQVARNA!!!!! WHAT A PIECE OF JUNK!!! However, worst of all is the china briggs motor. From the beginning it required the muscles of a weight lifter just to crank it. VERY POOR STARTING! After replacing the carburetor it cranks somewhat better. Still it runs roughly and sometimes shuts down under normal 2" deep weeding use. Simply call me "VERY FRUSTRATED IN ALABAMA"
Date published: 2012-08-27
Rated 5 out of 5 by from Good value engine I too received the chinese made, cheapest B&S engine available with the aluminum cylinder and plain bearings in my Poulan Pro roto-tiller. I wish B&S would not hide these attributes in their engine serial number so that customers know what they are getting. Had I known that I would have gone with another brand that offers the no-name Chinese engines that have a cast iron cylinder liner and ball bearing supported crank standard. That said, not all is lost. This engine has more than enough grunt and powers my roto-tiller reliably. Starts on first pull every time, and runs smooth and relatively quiet. Controls and engine exterior have a look and feel of quality to it. I'm sure despite the cheap engine internals (where it matters most) I will still get a lot of years use out of this engine, and the tiller it's hooked to. After all, it only gets used for about 10 hours in the springtime and gets put away for the rest of the year.
Date published: 2012-04-21
Rated 1 out of 5 by from bad exp. w/brigs engines purchased a polyvac lawn leaf vacuum a few years back. the oem motor on this vac. was a 900 series-intek horizontal,exactly as shown in this picture. what it was used for was about one acre of med. to heavy leaf pick up in the fall of each year. after half way thru the third year a shaft came thru the block. about 500.00 dollars later i'm back picking up the rest of the leaves. a couple years later the same thing happened! the first failure was looked at as things like this happens. the second failure was looked at somewhat differently. BAD DESIGN OR MISS APPLIED APPLICATION. FIRST TIME COULD HAVE BEEN MY FAULT, THE SECOND TIME REMOVED THOSE DOUBTS. I'LL BE REPLACING THIS TIME FROM HARBOR FREIGHT, MADE IN CHINA AND WHEN THIS ONE FAILS IT IS TO BE EXPECTED. SINCE THE BRIGS IS DESTINED TO FAIL, WHY NOT REMOVE ALL DOUBTS AND SAVE A COUPLE HUNDRED BUCKS.
Date published: 2015-12-13
Rated 1 out of 5 by from Poor starting, undependable Motor (with electric start) came with a DR Power lawn vacuum. First fall season motor ran well. Second fall season carburetor became finicky requiring constant cleaning of fuel bowl. I finally replaced the entire carburetor and had some satisfaction with engine performance the remainder of the season. Third season, engine smoked badly and finally quit working altogether and had to replace with a Honda Moto .
Date published: 2015-10-30
Rated 2 out of 5 by from Not very pleased This motor came on a 662-pro three point hitch mount trac vac. I'm not very pleased with this motor as I figured I wouldn't be since it's a Briggs and I've never had luck with them. Anyway first is it start on one pull when it sits over night. Now if you shut it off during the day to add fuel check oil or for a lunch break, trying to turn it back on will make you'r arm fall off. It just sucks and I dont know why. Also when mowing lawn's or vacing up leave's if you hit a bump on the lawn and bounces the machine around that motor kicks out and kicks back in like the bump causes an air pocket and it starves for fuel for 5 seconds or so. Not very pleased. Only thing I like is power. It sucks up everything i run over with my machine and sucks it right in and into the collection bins. But with power come's fuel economy and it drink's fuel fast. Keep a 5 gallon jug full of fuel for that you'll need it for a days work.
Date published: 2015-12-11
Rated 5 out of 5 by from Great repower for 1985 TroyBilt Horse Even though it was way to wet to do any tilling,I nonetheless went and took the cover off the tiller and grasped the starter rope and gave 'er a rip......started up after sitting since August 2015.Glad I repowered with Briggs and Stratton 900,Great Engine.No Complaints.Read and follow the instructions to avoid problems.
Date published: 2016-03-11
Rated 1 out of 5 by from Very disappointed...... This engine was on a lawn vacuum I bought a year ago. Used oil and smoked a little from the start. Was hoping rings just needed to seat in. Oil consumption got progressively worse as did smoking. Serviced engine and prepared for storage during the winter. Went to use unit this past weekend, it started right up and proceeded to belching smoke with a heavy oil smell. Half way thru a tank of fuel engine stopped and would not re-start. Pulled new spark plug and it was totally oil fouled. Put in new plug. Checked air filter. New air filter was totally oil saturated. Checked oil level. It was barely showing on dipstick. Note, engine oil level was correct at start. Put in another new air filter. With new spark plug it started right up and I was able to get thru rest of the tank of fuel with lots of oil smoke. Very disappointed as I always take care of my equipment and service it properly. Don't know exactly what to do now. Guess I'll pull the engine and take it to the repair dealer where they will probably tell me that it was operator error.
Date published: 2015-10-19
  • y_2017, m_9, d_21, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_17
  • loc_, sid_205158165, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 246ms
  • REVIEWS, PRODUCT