0011675060305

Briggs & Stratton

Model 6030

Internet #100645509

Store SO SKU #1000943665

Cold Weather Kit for GE 10,000 - 13,000-Watt Home Generator Systems

$171.98 /each

Frequently Bought Together

Product Overview

The Briggs & Stratton 6030A Standby Generator Cold Weather Kit helps ensure your Empower and Intelligen Series home generator systems run smoothly during the winter months. The battery warmer and oil block warmer keep the engine warm when temperatures drop below 40-degrees Fahrenheit. Each warmer also automatically turn off when temperatures climb above 40-degrees Fahrenheit. For more than a century, Briggs & Stratton branded engines and power equipment have helped consumers get the job done. Known for hard-working, dependable, efficient products, Briggs & Stratton is the world’s largest producer of gasoline engines for outdoor power equipment. Briggs & Stratton products are designed, manufactured, marketed and serviced in over 100 countries on all seven continents.

  • Maintains the life of your generator
  • Includes a battery warmer and an oil block warmer
  • For Briggs & Stratton Empower and Intelligen series home generator systems
  • Featuring a pre-wired hookup with no need for extension cords
  • Deliver peak performance with engine preventative maintenance
  • Click here for more information on Electronic Recycling Programs

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

2 Questions2 Answers

Customer Questions & Answers

Cold Weather Kit for GE 10,000 - 13,000-Watt Home Generator Systems
Cold Weather Kit for GE 10,000 - 13,000-Watt Home Generator Systems

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from Cold Weather Kit for GE 10,000 - 13,000-Watt Home Generator Systems
 
1 answer

does it come with EASY directions for install,i mean real easy?

This question is from Cold Weather Kit for GE 10,000 - 13,000-Watt Home Generator Systems
Asked by
toronto,ontario,canada
Read all my Q&A
September 15, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

September 17, 2014
Answer: 
The cold weather kit does come with installation instructions. The manufacturer of the unit recommends it be installed by an authorized service dealer only. Please work with your local Home Depot for your nearest service dealer.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Cold Weather Kit for GE 10,000 - 13,000-Watt Home Generator Systems
 
1 answer

Is this a 6030A Briggs and Stratton kit for a 7kw-20kw home generator

This question is from Cold Weather Kit for GE 10,000 - 13,000-Watt Home Generator Systems
Asked by
Read all my Q&A
January 14, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

February 3, 2014
Answer: 
Yes the 6030A can be used with the 7kW to 20 kW standby generators.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-09-08 T12:43:58.498-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100645509, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 18ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.1 out of 5 by 9 reviewers.
Rated 2.0 out of 5.0 by Didn't last long Had to waste two quarts of new synthetic Oil to install block heater, waste of MY money. I have a lot of tools and I am mechanically inclined but what a pain to install the oil heater in the block. I changed the oil and filter today and found the battery heater thermostat burnt up. I have no idea when it happened but now I'll be out another $175 for a battery heater and I guess I'll have spare block heater for when that fries. December 27, 2014
Rated 3.0 out of 5.0 by a bit pricey Very difficult to install the engine block heater-tried to install it thru the inspection plate as directed- but to no avail --- had to remove the whole side panel of the generator and had to purchase a crowfoot wrench. Even so very difficult -- but done. But absolutely necessary in our cold climate. Maine May 15, 2014
Rated 5.0 out of 5.0 by A MUST FOR COLD CLIMATES The unit comes pre-wired for the cold weather kit making the installation of the battery warmer and oil heater a matter of just plugging in the connector on the heaters. My unit came with the oil heater installed and connected. These two heaters will ensure quick starts and proper lubrication of the engine, The oil heater will extend the life of the engine when operating in cold climates. September 10, 2011
Rated 5.0 out of 5.0 by well thought out product Easy to install, need to drain the oil. installed when I needed to change the oil. Battery warmer is just a plug in and set battery on it. Nice product April 22, 2014
Rated 5.0 out of 5.0 by This heater connects to the generator easily This product is designed well to work with Briggs and Stratton generators. Both heaters connect to prewired connectors on the generator. The directions are easy to read and well written. When I bought the item I thought I was only buying a battery warmer but there was a block heater that screwed into the generator by removing the freeze plug. Great design. December 25, 2012
Rated 3.0 out of 5.0 by questionable value this item should be std equipment with the generator. The battery warmer was easy to install BUT the oil warmer was an issue. On the vertical engines the place for the installation was difficult to get to and you needed either strong fingers or speciailzed mechanic equipment to do it properly. February 12, 2013
Rated 5.0 out of 5.0 by Great item, simple installation, way over priced... Item is a must have in cold climate areas, installation took me less than 10 minutes. The item is way over priced though. May 28, 2013
Rated 4.0 out of 5.0 by Very good product overall a little pricey . The oil in the engine must be drained to install the oil heater. problem is the engine comes with the oil filled from the factory. A real pain to have to drain new oil to install the heater. December 20, 2011
  • 2016-09-21 T16:36:51.653-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_9, tr_9
  • loc_en_US, sid_100645509, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 15ms
  • REVIEWS, PRODUCT