Model # 192980GS

Internet #205448657

Briggs & Stratton Fuel Valve Service Kit
0024847061475

Briggs & Stratton

Fuel Valve Service Kit

$11.85 /each

Frequently Bought Together

Product Overview

Valves control the flow of fuel vapor into the combustion chamber and the flow of exhaust gases leaving the engine. Faulty or dirty valves may stick and can develop pits, cracks or grooves that cause the engine to lose power and fuel efficiency. When you remove the valves from the engine, inspect them carefully. Then, if the valves are not badly worn and the parts are not damaged, you can tune up the valves and seats so that the valves seal effectively.

  • Replaces 698110, 695736, and 697779
  • Fits most 121000 and 122000 model Briggs & Stratton engines
  • Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
  • Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
  • Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
  • There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

2 Questions2 Answers

Customer Questions & Answers

Fuel Valve Service Kit
Fuel Valve Service Kit

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from Fuel Valve Service Kit
 
1 answer

I have a Generac generator (Model 19G412 - 5000w). Will this fit properly to replace the one that came with the generator?

This question is from Fuel Valve Service Kit
Asked by
Read all my Q&A
October 15, 2016
User submitted photo
User submitted photo
User submitted photo
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

October 21, 2016
Answer: 
Please work with your local Home Depot store associate to identify the correct fuel valve service kit for your generator. Make sure to have the generator’s model and serial numbers available to reference.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Fuel Valve Service Kit
 
1 answer

just need the rubber gasket as I already purchased the shut off valve

This question is from Fuel Valve Service Kit
Asked by
new orleans
Read all my Q&A
July 7, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

July 9, 2016
Answer: 
Please work with your local Home Depot associate to determine the correct rubber gasket that is needed.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
1 of 1
  • 2016-10-30 T22:46:09.256-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_205448657, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 35ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.7 out of 5 by 3 reviewers.
Rated 3.0 out of 5.0 by NO PART, NO WORKING GENERATOR It is amazing to me that they would build any generator using such a skimpy part for such an important aspect of the generator. This is the part that connects the gas flow from the fuel tank to the fuel tube that delivers the gas to run the unit. My generator was only two years old when the rubber part that fits into the gas tank rotted and started leaking like a sieve. So, bottom line, if you don't have a replacement part like this one on hand, you can forget about having any backup protection during a power outage. You would think the Husky Co. would have put a little more time into designing a part as important as this one is to be of higher quality. So, the part works, but the design of the generator itself needs a lot of improvement. July 21, 2015
Rated 3.0 out of 5.0 by Had no choice Ditto to the review by nascarswede88. I had the same problem. I'm recommending the fuel valve service kit only because I had to replace the part. October 28, 2015
Rated 5.0 out of 5.0 by perfect fit Perfect fit for my generators fuel tank Oem part and quick ship to store December 10, 2014
  • 2016-10-30 T20:54:40.183-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_3, tr_3
  • loc_en_US, sid_205448657, prod, sort_default
1-3 of 3
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 34ms
  • REVIEWS, PRODUCT