0784891328114

Broan

Model 9810WH

Internet #202079309

Store SO SKU #1000313203

11-9/16 in. 1000-Watt 120/240V High Capacity Fan-Forced Wall Heater

$157.60 /each
  • Effective heat source
  • Adjustable thermostat
  • Good for entryways and other areas

Frequently Bought Together

Product Overview

This Broan 1,000-Watt Wall Heater is ideal for providing high-wattage heat for lobbies, entrance ways, or vestibules. This heater is equipped with a built-in fan-delay switch that allows the element to warm-up before the fan starts. As the heating element cools down, the fan remains on to distribute lingering heat as efficiently as possible. The heater's built-in adjustable thermostat allows for convenient temperature control.

  • 1,000-watt heater accommodates a variety of heating needs
  • Efficient fan-delivered heat for high-capacity heating
  • Adjustable thermostat maintains your desired temperature
  • 120 volt or 240 volt installation options for versatility
  • UL listed for safety
  • Ideal for providing high-wattage heat to lobbies, entrance ways, or vestibules

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

8 Questions24 Answers

Customer Questions & Answers

11-9/16 in. 1000-Watt 120/240V High Capacity Fan-Forced Wall Heater
11-9/16 in. 1000-Watt 120/240V High Capacity Fan-Forced Wall Heater

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
5 answers

Does this unit need a dedicated circuit?

This question is from 11-9/16 in. 1000-Watt 120/240V High Capacity Fan-Forced Wall Heater
Asked by
Broomfield, Colorado
Read all my Q&A
January 27, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (5)

Asked by
Lansdowne, PA
Read all my Q&A
April 26, 2016
Answer: 
The safest answer to your question is yes. Logically, it depends on where you plan on drawing the power to operate it from. If you are using a 120 VAC, 60 Hz source you need to supply a continuous load of 8.3 Amps. If supplying power with a 240 VAC, 60 Hz source you will need a continuous load of 4.2 Amps. Your source of power, in either case, needs to supply sufficient power to all the items serviced by Read More
The safest answer to your question is yes. Logically, it depends on where you plan on drawing the power to operate it from. If you are using a 120 VAC, 60 Hz source you need to supply a continuous load of 8.3 Amps. If supplying power with a 240 VAC, 60 Hz source you will need a continuous load of 4.2 Amps. Your source of power, in either case, needs to supply sufficient power to all the items serviced by the source without exceeding the circuit protection device (breaker/fuse) providing the service.
If you know all of the power ratings of all the existing devices/loads currently connected to the breaker/fuse you can add them up and add in the heater load requirement. If the figure exceeds the rating of the breaker/fuse you planned to use, you need a dedicated circuit.
Always..................SAFETY FIRST! Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Anonymous
Painesville OH
April 8, 2015
Answer: 
I did not. I have three electric heaters on a 20 amp circuit. You just have to be sure you do not exceed the amperage rating for your circuit.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Dayton, Ohio
Read all my Q&A
March 15, 2015
Answer: 
Yes
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Middletown, PA, USA
Read all my Q&A
March 5, 2014
Answer: 
Not really. This unit draws around 9 amps, which leaves plenty of room on a 20 amp breaker, providing it doesn't have to share with a heavy draw item.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

January 27, 2014
Answer: 
Yes, it does.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
5 answers

Can this unit be used in a bathroom?

This question is from 11-9/16 in. 1000-Watt 120/240V High Capacity Fan-Forced Wall Heater
Asked by
johnboy
Louisville, KY
October 1, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (5)

Asked by
Lansdowne, PA
Read all my Q&A
April 26, 2016
Answer: 
The unit can be used in the bathroom with proper location and electrical safety rules, and code, observed. If you cannot insure proper safety, electrical requirements and standards, have a professional install it.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Anonymous
Painesville OH
Home Improvement Profile: DIYer
April 8, 2015
Answer: 
If it is away from water and pipes I would say yes it could. The unit is grounded, but I personally would not want any unit to be within reach of a bathtub or sink.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Dayton, Ohio
Read all my Q&A
March 15, 2015
Answer: 
Yes. That is where I installed mine.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Balltimore, MD
Read all my Q&A
December 23, 2014
Answer: 
Yes.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

October 1, 2013
Answer: 
Hi, JohnBoy. Thank you for your question about this wall heater. We appreciate your business. Per our installation instructions, here are the safety recommendations:
Carefully read all instructions and product labels before beginning installation.
• Only mount the heater in a vertical position.
• Mount the heater at least 6” above the finished floor.
• Do not mount the heater over a bathtub or in a
Read More
Hi, JohnBoy. Thank you for your question about this wall heater. We appreciate your business. Per our installation instructions, here are the safety recommendations:
Carefully read all instructions and product labels before beginning installation.
• Only mount the heater in a vertical position.
• Mount the heater at least 6” above the finished floor.
• Do not mount the heater over a bathtub or in a shower stall enclosure.
It should be at least 3 feet away from the tub/shower enclosure.
• When mounted, the heater should not be closer than 12” to an adjacent wall.
• Do not block the wall heater — i.e., by mounting under a towel rack, behind a door, etc.
If you have further questions, please contact our Technical Support Department at 888-336-6151. Thanks, again
Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
4 answers

Can this unit be used as a fan only or is it constant heat?

This question is from 11-9/16 in. 1000-Watt 120/240V High Capacity Fan-Forced Wall Heater
Asked by
Mike
January 13, 2013
Broan 174 Wall Heater with Built-In Thermostat, 1500W
+2points
2out of 2found this question helpful.
Was this helpful?helpful2unhelpful0

Answers (4)

Asked by
Lansdowne, PA
Read all my Q&A
April 26, 2016
Answer: 
It cannot be used as a fan-only device. The heat elements and fan are wired to the power source through a thermostat/switch. It's all, or nothing.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Anonymous
April 8, 2015
Answer: 
No. It only comes on when the unit is calling for heat. As soon as the temperature is achieved it shuts off.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Dayton, Ohio
Read all my Q&A
March 15, 2015
Answer: 
Only for heat....not as fan.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

January 14, 2013
Answer: 
HI, Mike. Thanks for your question. This unit is a built-in heater. It has a fan to push the heat out, but it is NOT designed to be used as a fan only (to move air). It's a heater. If you would like to call our Technical Support group to discuss that further, please dial 888-336-6151 and they can assist. Thanks, again.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
2 answers

Does the heat output (wattage) on the Broan depend on whether it's wired to 120 or 240 volts?

This question is from 11-9/16 in. 1000-Watt 120/240V High Capacity Fan-Forced Wall Heater
Asked by
California
Read all my Q&A
May 23, 2016
The Broan heater is rated at 1000 watts heat output. But does it depend on whether or not it's wired to 120 volts or 240?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Lansdowne, PA
Read all my Q&A
May 24, 2016
Answer: 
The Wattage does not depend on Input Voltage. The instructions will describe how to connect the wiring for either 120 VAC, 60 HZ and 240 VAC, 60 HZ. The unit comes wired for 120 VAC 60 Hz.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

May 24, 2016
Answer: 
If this unit is wired to 120V or 240V, the wattage is still the same. You do not loose or gain performance. Thank you.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-08-17 T12:37:17.646-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202079309, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 353ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.9 out of 5 by 18 reviewers.
Rated 5.0 out of 5.0 by Exact Replacement For Nutone Wall Heater I needed a replacement for a Nutone wall heater that had started showing the results of years of faithful operation. This Broan is the exact same size and construction as the old Nutone, but a lower wattage, which is fine. Really happy with the Broan. April 26, 2016
Rated 3.0 out of 5.0 by a little disappointed becasue it takes a very very long time to heat the small space it's installed to heat i selected this wall heater, because it was one of the few that would work in the existing cut out. it didn't fit exactly, but still looks fine, however, it takes a very long time to heat the very small space it's meant to heat. it is also a little too noisy. February 10, 2016
Rated 4.0 out of 5.0 by Adequate replacement, easy to install I needed a replacement for an old Nutone unit that had stopped working. This met the need, although it wasn't a direct match for the wall opening. The unit is easy to assemble with only two parts, the box and the front panel/heater assembly. Modifying the opening and installing the replacement was easy. The only complaint I would have is it is a bit noisy and the front panel lacks elegance. On the other hand, the price was right. You're not paying the cost of a Panasonic Whisper unit. April 19, 2015
Rated 4.0 out of 5.0 by Second one works fine, first one had to be returned First one did not work so I had to order another exactly like it since the tiled hole was already installed. No problem returning defective unit and second one works fine. April 28, 2015
Rated 5.0 out of 5.0 by Everything as Promised Everything went great. Ordered it, and it came in a few days, before it was expected. Directions to install were great. What more can I say. April 8, 2015
Rated 4.0 out of 5.0 by Good Value Heater easy to install. The heater runs longer than our previous one did to heat the room, but once heated the area maintains a more consistent, even temperature than before . The front is clean looking and the unit easy to keep clean. Would recommend! March 15, 2015
Rated 5.0 out of 5.0 by Heats and heats fast! Bought this model to replace an old radiant heat type during a bathroom renovation. I have a relatively small guest bath, but it sure gets the job done quickly. I was rather troubled to see that the grille was some type of plastic, even though it is fairly attractive, and wondered about how it would withstand the heat; but it has so far. I purposely put the heat on full blast for a good hour or so and no discoloration or warpage was noted. I guess only time will tell, but I still would recommend the product. September 17, 2014
Rated 5.0 out of 5.0 by Purchased to replace a Nutone model that burned out This Broan will fit into a existing in-the-wall box of the old Nutone wall heaters of a similar series number The online specs provided by HD enabled me to match it before ordering. I paid a little more for it than other websites but I did this so that I'd be able to return it to HD if it didn't fit. January 1, 2015
  • 2016-08-20 T11:45:05.305-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_18, tr_18
  • loc_en_US, sid_202079309, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 68ms
  • REVIEWS, PRODUCT