Rated 4.6 out of 5 by 63
Rated 4.0 out of 5.0 by ratdog good buy
Overall I am pleased with the Quality, ease of instillation and functionality of the seat but the seat is a bit short for my toilet. When I ordered I thought I was ordering a different seat one with more functions. I should have been more careful when placing my order.
Please understand why I am not sending a picture of the product in use.
July 1, 2016
Rated 4.0 out of 5.0 by Ob Great item
Great item to have only until you have to turn it in for warranty issues. Shipping it back cost a fortune to do so be prepared.
October 4, 2016
Rated 4.0 out of 5.0 by BC Bidet seat
This is my second one, both are very good quality. Kit requires a 16 or 20" flex connection 1/2" female on bidet side, whatever your supply valve is on the other (3/8 for mine). Works well, wish they had put the adapter in the install kit.
October 25, 2016
Rated 4.0 out of 5.0 by nanowiz Installation a bit problematic
I bought this to replace an existing bidet made by Rasonic for my Toto toilet.. Although I bought the elongated version of the bidet, it did not match the shape of my elongated Toto toilet. But since it functions OK, I decided to keep it. You can see in the photos how much the seat overhangs, but the support pads are landing on the toilet OK and the bidet sits well and stable. Just a bit awkward visually.
I ran into several problems installing the bidet. First, the Toto toilet only has a limited opening behind the toilet bowl and I had to lay down on the floor next to the toilet hugging the toilet bowl to reach my hand inside the back of the toilet to get to the screws for mounting. My old Rasonic can be mounted completely from the top. Also the hose connection to the tank is only accessible through this hole as well. I'll probably have to remove the tank from the toilet bowl to get to it. So I chose to use the existing T from the old bidet which was connected to the tank via a 3/8" hose.. Besides, the T that came with this bidet are 7/8" thread to the tank and faucet. My faucet is 3/8" also. Using the new T would be a lot more work plus another trip to HD. After I got the whole thing put together and turned on the water, the connection from the hose to the T was leaking profusely, Turned out that the ID of my old T was too small to allow the center protrusion of the hose connector to fit through. See photo. So, I had to sand down that protrusion to allow the gasket to seat properly. There is a protruding lip on the inner bottom edge at the front of the seat. Guess it is a splash barrier. Took a few iterations to position the seat perfectly with the lip not hitting the toilet and still placing the seat as forward as possible. Of course, each iteration requires me to lie down hugging the toilet bowl on both sides. Now thinking about it, I should have attached the bidet with the nuts loose, position the seat and then tighten the nuts.
The rear spray action worked as well as my old Rasonic. There is just no feedback on the remote as to what water pressure was selected. The front nozzle was hurting me you know where until I can turn down the pressure. Guess I shouldn't be using the front spray anyways.
The magnetic holder for the remote was a nice tough. The IR signal reached the bidet with no problems although I mounted it on the opposite side of the sensor. The spray nozzles are plastic in this model similar to my old Rasonic. But it has a flush feature to wash the nozzles after each use. I had to pull the nozzles out in the Rasonic out manually to clean them once a while. There is also a button on the side of the bidet to kick off the flush action which runs for 2 minutes if not manually stopped.
In the photo of the hose in the HD site, it shows a sharply bent shape. It is just a regular plastic hose with no preformed shape. It sticks straight out the side of the toilet. Would be more sleek if there is a 90 degree bend in the hose.
Overall I am happy with the unit. Just the shape mismatch is a bit of eyesore. But it is actually more comfortable to sit on.
May 4, 2016
Rated 5.0 out of 5.0 by Phil Perfect
Easy to install.
Easy to use.
August 31, 2016
Rated 5.0 out of 5.0 by Vidya Great product - works like a charm!!
Purchased this product yesterday from the local Home Depot. Easy to install, and works like a charm!! The different settings for temperature (on the seat and for the water) are great. Can't believe we didn't use something like this for so long. Goodbye flushable wipes!!
May 14, 2016
Rated 5.0 out of 5.0 by WildBill82 We purchased this unit as a replacement for an earlier model.
The installation was very easy, since this was a replacement unit for an earlier model that finally quit after 11 years. Have to keep the wife happy, right? Thanks, Bill
March 25, 2016
Rated 5.0 out of 5.0 by Baiter Would buy same unit again. Happy camper.
Quick install as it is a replacement for a dead unit. (already had water supply T installed.) Turned on water to check for leaks, applied power; had to consult manual to locate power button on side of unit. Works fine, no problems.
June 5, 2012