Rated 4.3 out of 5 by 69
Rated 5.0 out of 5.0 by Homeowner They look nice.
They are plastic shutters. The back side is hollow. If you use a 1/4in drill bit, they fit just like they are supposed to. I used silicone in the holes I drilled and on the "threads" of the plastic fasteners as well. I placed the shutters flat on the ground, marked where I wanted the fastener holes to be and drilled them. I then held the lightweight shutter up against my siding, snugged it up to the side of the window, and when I had it positioned right where I wanted it I then drilled the middle (left and right sides) holes only. I set the shutter down, took 2 fasteners and pressed them thru the holes I drilled in the middle(left and right sides) of the shutter. Then I put silicone on the "threads" of the fasteners that were then sticking out from the back side of the shutter. I put the shutter back up to the siding and poked the tips of the fasteners into the holes on my siding and then used a dead blow mallet to gently tap the fasteners into the holes. Then I repeated the process with the bottom holes and then the top holes. Easy peasy.
January 12, 2014
Rated 5.0 out of 5.0 by Centurion Great value. Good looking. Fast Shipping.
Installed a railing and painted it white along with the columns. With the existing shutters, there was just too much white out front (see photo). Bought these to replace ones already installed. Thought about painting the old ones black but after doing some research and comparing the time and costs of spray paint we decided to get these instead. Now we won't have to worry about the paint fading or chipping. Some before and after shots below.
April 26, 2016
Rated 2.0 out of 5.0 by Lkayr Shutters
Already damage on 2 slats from hail 5/11. Only had them installed one week. Landfill already.
May 11, 2016
Rated 5.0 out of 5.0 by Rubena Shutters
The new shutters have refreshed the outside appearance my home
August 23, 2016
Rated 4.0 out of 5.0 by Carrie I really like these
These look great on our house, fairly easy to install, but they are so tall, that it would have been nice to have another point of anchor in the middle of the shutter without having to drill additional holes in it.
February 3, 2016
Rated 4.0 out of 5.0 by Jk nice looking
These look good. I thought they would be heavier and two sided but they are hollow. They recomded buying the matching screws but you get all you need with them.
July 26, 2016
Rated 5.0 out of 5.0 by Sp Great product
Well made and easy to install. Completed the look of the house.
August 16, 2016
Rated 5.0 out of 5.0 by RMGC Outdoor shutters
We already had shutters across the front of our house that needed painting but the side was so bare looking. We installed these on the 2 large windows on the side and the difference was astounding. We have more bare windows on the back and will definitely put these back there.
August 2, 2016