Model # 712HD

Internet #204724686

Bullet Tools Heavy Duty Flooring Pull Bar

Bullet Tools

Heavy Duty Flooring Pull Bar

$4262 /each

Frequently Bought Together

Product Overview

The Heavy-Duty Pull Bar provides extra strength and versatility on flooring installations. The 17 in. bar boasts several design features that help get the job done faster and easier. With the beveled end, your tight places will be at ease when prying at those installations.

  • Beveled end for prying in tight places
  • Angled steel block for durable hammer contact
  • Added leverage when tightening tongue and groove joints
  • Closes gaps when installing laminate and hardwood
  • 30 days satisfaction guarantee

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

How do you use it

Asked by: Red
You'll need to use a pull bar to fit tongue and groove/click flooring together when there isn't room to use a tapping block. 1) Hook the wide angle iron piece of the pull bar over the edge of the plank, toward the wall, and pull it tight against the edge. 2) Hammer with a rubber mallet against the block opposite the angle iron until the plank moves into place. Hardwood tongue and groove floors require heavier pounding, maybe with a steel hammer. This pullbar has a pry-bar end too, which could help align flooring around door jambs etc.
Answered by: RoundMan
Date published: 2016-03-31

Is this item in the store

Asked by: veronica
  • y_2017, m_6, d_23, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_, sid_204724686, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 95ms

Customer Reviews

Heavy Duty Flooring Pull Bar is rated 2.8 out of 5 by 4.
Rated 1 out of 5 by from Way over-priced. Build your own or look for another brand. Way over-priced. Build your own or look for another brand.
Date published: 2016-12-18
Rated 5 out of 5 by from Pull Bar Great tool to have with the installation of any laminate
Date published: 2016-05-10
Rated 2 out of 5 by from Worked fine until it started to bend. After using for about an hour the tool began to bend. HD replacing.
Date published: 2014-03-26
Rated 3 out of 5 by from solid built This flooring pulling bar is made very solid. I am using it to install 3/4 inch solid hardwood flooring. There is a problem because the flat piece of steel on the end for pulling is higher than 3/4" by a good bit so the bar won't sit flat on top of the installed hardwood flooring. Also, this product was shipped direct from the manufacturer and took a very long time to arrive. The heavy felt piece on the bottom did a decent job protecting the installed flooring ... but the bar is at an angle and doesn't sit flat as I said above.
Date published: 2014-03-11
  • y_2017, m_6, d_22, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_, sid_204724686, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 97ms