Model # 345124

Internet #203040802

Store SKU #961653

CAMO 1-7/8 in. ProTech Coated Trimhead Deck Screw (700-Count)


1-7/8 in. ProTech Coated Trimhead Deck Screw (700-Count)

$45.78 /package

Frequently Bought Together

Product Overview

The CAMO Edge Deck Fastening System works on most treated lumber, hardwood, cedar, composite or PVC deckboard. CAMO Edge Driver Bits combine to deliver a fastener-free deck surface at a price that makes getting the job easy and installing the deck even easier. The CAMO Edge Deck Fastening System is engineered to work exclusively together. Using other branded tools, fasteners or bits will impair performance and won't produce the desired results.

  • For use with most nominal 5/4 (1 in. x 5-1/4 in. to 5-3/4 in.) solid or grooved deckboards
  • Protech coated - 1500 hour salt spray
  • Covers approx. 200 sq. ft. deck
  • 2-free driver bits included
  • A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting
  • A star drive offers more points of contact for better performance and reduces bit slippage and wear
  • An aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry
  • A unique trim head design provides a less visible point of entry

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

What size to use for 5/4 decking?

What size to use for 5/4 decking?
Asked by: professor
Thank you for your question about CAMO. When using CAMO to install 5/4 decking (3/4" to 1" board thickness), we recommend you use the 1-7/8" CAMO Edge Deck Screws. If you are installing a thicker deck board (board measuring 1" to 1-1/2" thick), then we recommend you use the 2-3/8" CAMO Edge Deck Screws. Thank you for viewing this CAMO product! -Team CAMO
Answered by: TeamCAMO
Date published: 2017-04-11
  • y_2017, m_4, d_24, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_, sid_203040802, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 87ms

Customer Reviews

1-7/8 in. ProTech Coated Trimhead Deck Screw (700-Count) is rated 4.4 out of 5 by 9.
Rated 5 out of 5 by from These are great screws. When used with the tool made for them, these screws are great. I built a 12' X 24' deck with a 32' wheelchair ramp and no screws are showing. I used these screws for the railing stiles and no screws are showing on the railing. I used pocket holes to attach the rails to the 4X4 posts. Without the tool, you need to start a pilot hole and then put the screw in, but it works. I used this on treated 5/4 X 6 boards.
Date published: 2012-12-27
Rated 5 out of 5 by from Great Product! Installation is a lot slower but well worth the end result. They are a bit pricey and I would like to see them include a few starter screws, the first 2 rows against the house you don't have room for the drill with the tool to fit.
Date published: 2016-08-09
Rated 4 out of 5 by from A little pricey Screws work great with the Camo Pro on 5/4 deck boards. Pull down the decking good and tight. Gave it only 4 stars because of the price.
Date published: 2016-10-01
Rated 5 out of 5 by from When used with the CAMOMarksman Pro Tool, these get the job done fast! I laid a 220sqft deck in a couple of hours with these - they look good and were super easy to use.
Date published: 2016-07-05
Rated 5 out of 5 by from Locked tight These work great with or without the tool. They lock down tighbarely visible.
Date published: 2016-06-24
Rated 5 out of 5 by from The CAMO System is best and simplest hidden fastener method Easy to use and effective. Is holding well and not readily visible.
Date published: 2016-10-04
Rated 5 out of 5 by from awesome quality I have seen some negative reviews about these screws breaking easily. That is totally bogus. Even when I didn't use the CAMO tool to put these in, I leaned into them with my screw gun and could bend them now and then, but never broke one. I installed over 2,000 of these screws and only bent two!! I backed out numerous ones and could reuse them with no problems. I definitely recommend these screws along with the CAMO system to put down a deck. Awesome product even though it is a bit expensive, but the results and the way it looks makes it well worth it.
Date published: 2015-09-29
Rated 5 out of 5 by from Dual Threads work well Put in my deck back 6 months ago and haven't had a board pull up or any issues at all. Threads really seem to do the trick and not allow over-driving.
Date published: 2014-01-17
  • y_2017, m_4, d_23, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_, sid_203040802, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 26ms