Message to Our Customers
Discontinued

Model # VM049C-12MDF

Internet # 202087143

Store SKU # 567379

LWM 49 1/2 in. x 3 5/8 in. x 144 in. MDF Primed Crown Moulding Pro Pack 60 LF (5-Pieces)

This item has been discontinued.
The Home Depot no longer carries this specific product.

Loading...

PRODUCT OVERVIEW

Model # VM049C-12MDF

Internet # 202087143

Store SKU # 567379

The LWM 49 1/2 in. x 3-5/8 in. x 144 in. MDF Crown Moulding Pro Pack enhances the style of your room’s decor as a decorative border where the wall meets the ceiling. It includes five 144 in. pieces for maximum savings on your project. The fiberboard construction is primed white for additional convenience and efficiency when paint is applied so you can easily match your existing decor.

California residents: see  Proposition 65 information

  • Medium density fiberboard construction
  • White finish is pre-primed for easy painting
  • Use as a decorative border where the wall meets the ceiling
  • Sold by the bundle to save you money versus buying by the linear foot
  • For interior use only
  • Manufacturers and availability may vary by store

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

SPECIFICATIONS

Dimensions
Product Depth (in.) 
144 
Product Height (in.) 
2.8125 
Product Length (in.) 
2.8125 
Product Width (in.) 
3.625 
Details
Application 
Ceiling 
Color Family 
White 
Finish 
Primed 
Finish Type 
Primed 
Flexible 
No 
Interior/Exterior 
Interior 
Kits 
No 
Material 
Medium Density Fiberboard (MDF) 
Moisture Resistant 
No 
Moulding Features 
No Additional Features 
Moulding Type 
Crown 
Paintable/Stainable 
Yes 
Pattern Number 
49 
Prefinished 
No 
Pro Pack 
Yes 
Rot Resistant 
No 
Sell Pack Options 
Pro Pack 
Solid/Finger Joint 
Solid 
Warranty / Certifications
Manufacturer Warranty 
No 

CUSTOMER REVIEWS

Rated 2.0 out of 5 by 2 reviewers.
Rated 3.0 out of 5.0 by spring angles I've used this in the past... The problem with the spring angles is usually not the material, but that it doesn't get set right (neither edge is actually tight to wall or ceiling). To avoid this, nail in the center of pieces first, so you can "roll" the corners up or down to make your cope or miter fit. Granted, mdf does chip easily, and it's not hard to ding up a corner installing. January 31, 2015
Rated 1.0 out of 5.0 by I would recommend buying a name brand product over this stuff The product didn't mention the spring angles, which isn't a problem but would have saved me some time. I found some of the spring angles weren't consistent and were off a couple of degrees, which makes an inside corner cope not fit right. An example: I was doing an inside corner and the corner measured 90 degrees with my angle finder. I cut the appropriate miter cut for 90 degrees with the spring angles of 38 and 52, which is what the crown is. After coping the cut the joint was totally off. I ended up using the degree setting for an 87 degree corner on a 45, 45 spring angle. I would recommend buying a name brand moulding over this MDF stuff. May 5, 2013
  • 2015-07-05T16:46:13.178-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_2, tr_2
  • loc_en_US, sid_202087143, prod, sort_default
1-2 of 2

SHIPPING AND DELIVERY OPTIONS

Store Exclusive. This item is available for purchase in select stores only.