Rated 4.1 out of 5 by 18
Rated 1.0 out of 5.0 by DwT After a Couple of Years
After carefully using it twice (for a total of 90 minutes), over the course of a week, my CST/berger LM30 quit working. The rotating head stopped rotating, even with motor humming, and the LEDs began blinking. Returned LM30 to Arkansas repair center where they quickly fixed it. I believe the problem was a calibration issue. I kept the unit safely in its case, on the floor, in the corner of a closet where it was protected and could not be bumped. I did not use the unit again until late April of this year (2016) and after calibrating it. It worked well during the four separate occasions I used it. On each of the four times I used it, I turned it on/off only a couple of times. I used it yesterday for a fifth time and while it was working well for about five minutes, it just quit working and shut itself off. I turned it on, the motor hummed, and the LEDs began flashing. The unit is well out of warranty, but I'm going to phone the repair center and see if it's worth getting fixed. To me, a dumpy level is worth much more for about half the cost. I have never had a complete tool fail (other than computers and my original Bosch router (bearings)) in over 40 years and to me this rotary level is a piece of junk.
June 8, 2016
Rated 5.0 out of 5.0 by Soccer Great Purchase
Just what I was looking for easy to use and a good price!!!!
March 3, 2015
Rated 1.0 out of 5.0 by BobD Save your money
I bought this to use doing a drop ceiling in a new space that was 40' X 60'. Well within the advertised range. Could not see the beam even with the only light being from outside. I had to use it as a spot laser and marked the corners and then used a chalk line. I could have done the same with a $20 hose level. I had a different laser for 10 years and it finally died so I thought I would try a Berger. Not worth half the money. Probably could get the same performance with a $60 Johnson model. It was returned.
February 25, 2014
Rated 4.0 out of 5.0 by Hashimoto32 Great Laser
Works Great! Easy to set up and handle. Nice and light weight compared to old lasers.
July 25, 2014
Rated 5.0 out of 5.0 by maczn A great little toy - 800 FT. DUAL BEAM ROTARY LASER LEVEL
Great quality for the money, Easy to assemble, easy to use. Glad they had an affordable option for my home project
June 24, 2014
Rated 5.0 out of 5.0 by donf rotory lazer
price of this packaged product initially caught my attention. I researched many rotory laser products and settled on this one as its accuracy and versatilty were equal or better at a much lower packaged cost. I used mine to target a lot excavation that i did not want to pay a surveyor to do. After that it was used to level foundation pours and mason brick walls, It pays for itself easily and provides confidense to take on the largest jobs.
April 29, 2010
Rated 5.0 out of 5.0 by jiski EZ to Use and Accurate
I purchased this rotary laser to make sure my footer frame was level. It was my first time for putting in such a frame and for using a rotary laser. The laser was easy enough to use for one person. The project took less time as a result. The kit is complete and the laser works in a variety of applications. The batteries are included so it is ready to work right out of the box. This tool is perfect for do it yourselfers.
November 12, 2012
Rated 5.0 out of 5.0 by jrSuffolk Very good & reasonably priced product.
Very happy with this kit. It would be nice to have some useage examples in the literature or manual. The manual is very basic to the operation of the product.
May 12, 2014