Model # 6F1500A

Internet #202502060

Store SO SKU #1000537329

Cadet 72 in. 1,500-Watt 240-Volt Electric Baseboard Heater in Almond
0027418065117

Cadet

72 in. 1,500-Watt 240-Volt Electric Baseboard Heater in Almond

  • Convection heating helps heat a space up to 200 sq. ft.
  • Quiet operation makes it perfect for any area in the home
  • High quality durability backed with a lifetime guarantee
$47.78 /each

Frequently Bought Together

Product Overview

The Cadet Electric Baseboard Heater utilizes convection heat to provide efficient warmth. The quiet operation, and low cost installation make it a perfect choice for a bedroom or any area of your home that requires additional warmth. Designed for ease of installation with pre-punched mounting holes, this hardwired heater can be wired at either end. Rugged U.S.A. steel construction with powder coated white paint for a durable, premium finish. A thermostat is required and sold separately.

  • No cords - requires hard-wired installation for a permanent, safe, reliable heating solution
  • Thermostat sold separately - choose a line voltage wall thermostat or BTF unit-mount thermostat for temperature control
  • Operates 1500-Watt at 240-Volt or 1125-Watt at 208-Volt
  • Convection heating helps circulate air to heat a space up to 200 sq. ft.
  • Timeless and proven fin construction maximizes surface area to funnel heated air and aid convection of air flow
  • Contemporary baseboard design is built to industry standard lengths to easily replace your current baseboard or match any new construction footprint
  • A high-temperature safety device switches heater off if normal operating temperatures are exceeded
  • Powder coating provides a smooth finish resistant to corrosion, scratches, fading, and wear
  • Steel-sheathed element offers excellent heat transfer and high quality durability
  • Pre-punched case at 1 in. intervals and accessible front caps provide easy installation of heater
  • Universal wiring allows you to install at either end of baseboard
  • Quiet operation makes it perfect for any area in the home, especially bedrooms
  • UL listed for safety
  • Lifetime warranty
  • Almond color
  • Match your heater to the voltage at connection: confirm if you have a 120-Volt or 240-Volt power supply before purchase; you can check your breaker, use a voltmeter, or look at the voltage on your old heater's label if replacing
  • Make sure you choose the right Electric Baseboard Heater for your space


Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Compare Similar

Price
$47.00 /each
$47.78 /each
$66.94 /each
$86.11 /each
Name 60 in. 1,250-Watt 240-Volt Electric Baseboard Heater in Almond 72 in. 1,500-Watt 240-Volt Electric Baseboard Heater in Almond 96 in. 2,000-Watt 240/208-Volt Electric Baseboard Heater in Almond 96 in. 2,000/2,500-Watt 240-Volt Electric Baseboard Heater in Almond
Brand Cadet Cadet Cadet Cadet
Ratings (16) (21) (6) (8)
Baseboard Heating Type Electric Electric Electric Electric
Voltage (volts) 240/208 240/208 240/208 240/208
Heating Technology Type Convection Convection Convection Convection
View Product View Product View Product View Product

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

5 Questions7 Answers

Customer Questions & Answers

72 in. 1,500-Watt 240-Volt Electric Baseboard Heater in Almond
72 in. 1,500-Watt 240-Volt Electric Baseboard Heater in Almond

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
3 answers

is this a wired in or plugged in heater?

This question is from 72 in. 1,500-Watt 240-Volt Electric Baseboard Heater in Almond
Asked by
Phil
Louisville, KY
October 14, 2012
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Montana
Read all my Q&A
June 21, 2013
Answer: 
It's wired, via back or bottom, left or right end.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
New Jersey, USA
Read all my Q&A
January 20, 2013
Answer: 
You have to hard wire it.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Vancouver, WA
Read all my Q&A
October 15, 2012
Answer: 
Hello Phil,
Thanks so much for your question! Your interest is very much appreciated. The Cadet electric baseboard heaters are permanent mount units that screw into the wood studs in the wall behind the heater. Depending on the model, they are wired in, or 'hard wired', to either a 120 or 240 volt electrical power supply line. On page 3 of the instruction guide referenced in this url, you will be able to
Read More
Hello Phil,
Thanks so much for your question! Your interest is very much appreciated. The Cadet electric baseboard heaters are permanent mount units that screw into the wood studs in the wall behind the heater. Depending on the model, they are wired in, or 'hard wired', to either a 120 or 240 volt electrical power supply line. On page 3 of the instruction guide referenced in this url, you will be able to see where the wire connections are made inside the junction boxes: http://www.homedepot.com/catalog/pdfImages/7e/7ed24a24-7ecd-4fbd-aec6-5bc30ccb0f9e.pdf
We've also included a link to a video which details the wiring process, and how to install an appropriate thermostat. We've referenced a couple of those for you as related products.
Thank you for taking time to ask! Read Less
User submitted video
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

splicing 2 units together

This question is from 72 in. 1,500-Watt 240-Volt Electric Baseboard Heater in Almond
Asked by
05450
Read all my Q&A
October 21, 2015
See no cabinet splice piece offered. Can the one of the two ajoining splice cavities within either end of the unit be cut out to reduce overall length of the duplication?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

October 22, 2015
Answer: 
Hi Ken and thank you for your question.
No, the heater cannot be reduced in length in any way. Cadet F series baseboard heaters can be butted together and wired in the middle so parallel wiring is needed.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

what breaker should I use for this heater 10, 20, 30amp?

This question is from 72 in. 1,500-Watt 240-Volt Electric Baseboard Heater in Almond
Asked by
Read all my Q&A
September 21, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

September 22, 2015
Answer: 
Thank you for your question.
Typically a 20 amp breaker is used for wiring one 6 foot baseboard heater.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

can supply enter from floor

This question is from 72 in. 1,500-Watt 240-Volt Electric Baseboard Heater in Almond
Asked by
maine
Read all my Q&A
September 21, 2015
supply from floor???
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

September 22, 2015
Answer: 
Thank you for your question.
The power supply can enter from the floor either on the right side or left side of the heater.
Please see page 4 of the owner's guide below for wiring instructions.
http://www.homedepot.com/catalog/pdfImages/2c/2c5bcf63-f1c8-4bbd-8a25-7c7935b17916.pdf
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-10-30 T22:40:05.881-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202502060, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 40ms
  • QUESTIONS, PRODUCT

Customer Reviews

72 in. 1,500-Watt 240-Volt Electric Baseboard Heater in Almond is rated 4.2 out of 5 by 21.
Rated 3 out of 5 by from Watch out for dents. Noisy The first unit came in dented, although the shipping box had no signs of damage. The dents must have been present at the factory. The heater installed easily, but it is noisy. Clicks when heating up, then starts clicking again when it cools down. Probably not a problem in a noisy room - but in our bedroom it can drive you nuts. On the plus side, it is inexpensive.
Date published: 2016-10-11
Rated 5 out of 5 by from Arrived quickly and in perfect condition with no damage from shipping. Looks good and works like... Arrived quickly and in perfect condition with no damage from shipping. Looks good and works like it should. No Surprises... thanks
Date published: 2016-12-29
Rated 5 out of 5 by from This is a great product, easy to install. This is a great product, easy to install.
Date published: 2016-11-22
Rated 5 out of 5 by from Great product ! Sturdy, great finish, durable & quality made. I love this heater. I bought another brand that I hate. It rusted so fast & the metal was so thin that it dented just looking at it. I HIGHLY RECOMEND THIS HEATER !!! You can beat the powder coat finish. It looks good & very easy to keep clean.
Date published: 2010-12-23
Rated 5 out of 5 by from I am quite pleased with the purcha I was able to get though the installation and it worked well. I am pleased with the purchase. I also picked up a thermostat from Home Depot to go with the heater and am disappointed in that purchase. Only 4-wire units were in stock; I wanted a two-wire. The thermostat said it could also be used for 2-wire. The heater would not work with the new thermostat; I had to reinstall my old one. So, the heater actually cost me about $15-20 more.
Date published: 2016-06-29
Rated 4 out of 5 by from Great baseboard heater. But.... I ordered this ship to store. I should have opened the box at the store, as one end of the heater was bent and battered. Not a major issue, but I had to take the time to repair, before installing. Heater works great. I bought the almond color as it was cheaper than the white one
Date published: 2015-11-03
Rated 5 out of 5 by from Bigger is Better This is the 3rd Cadet heater that I have bought from Homedepot. This one is replaceing a 4' 240v one that I put in the kitchen. My house was built in 1890 1150sq ft 3 bd rm 2 story. The kitchen & laundry room are of the back of the house , we have hot water basebord heat but NOT in the kitchen. The laundry rm has a basebord unit. Thease 2 rooms are allways much cooler than the rest of the house. The 4' Cadet heater was not able to satisfy the Cadet wall mounted thermostat. So I bought the 6' Cadet 240volt heater and removed the 4' heater, Installed that in the laundry room and mounted the 6' Cadet heater in the kitchen and now the heater is big enough to reach set temp at the wall t stat. Now both rooms are nice and warm.
Date published: 2013-01-20
Rated 3 out of 5 by from Good working heater but poor quality control The heater works as it should, combined with the optional thermostat that mounts right to it.... but I was disappointed in the quality control of the baseboard heater itself. I bought 3 heaters at the same time, however when this one was removed from the box, I could see that the top edge of the heater (the top edge that goes along the wall) had a big dent in it. There was no damage on the packaging box itself, so it had either been dropped, or something had hit it, before it was packaged. It was very noticeable, so it wasn't just simply missed. I would have returned it for an exchange but since it was already getting cold outside at night and I was without heat, I had to immediately install it. I didn't want to wait a few more weeks for a replacement to be shipped, so I just have to live with it. The heater works great though, just that its a bit of an eye sore.
Date published: 2015-12-15
  • y_2017, m_1, d_18, h_13
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_21
  • loc_, sid_202502060, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 76ms
  • REVIEWS, PRODUCT