Model # 8F2025W

Internet #202502551

Store SKU #138715

Store SO SKU #1000683243

Cadet 96 in. 2,000/2,500-Watt 240-Volt Electric Baseboard Heater in White
0027418099600

Cadet

96 in. 2,000/2,500-Watt 240-Volt Electric Baseboard Heater in White

  • Convection heating helps heat a space up to 350 sq. ft.
  • Quiet operation makes it perfect for any area in the home
  • High quality durability backed with a lifetime guarantee
$87.86 /each

Frequently Bought Together

Product Overview

The Cadet Electric Baseboard Heater utilizes convection heat to provide efficient warmth. The quiet operation, and low cost installation make it a perfect choice for a bedroom or any area of your home that requires additional warmth. Designed for ease of installation with pre-punched mounting holes, this hardwired heater can be wired at either end. Rugged U.S.A. steel construction with powder coated white paint for a durable, premium finish. A thermostat is required and sold separately.

  • No cords - requires hard-wired installation for a permanent, safe, reliable heating solution
  • Thermostat sold separately - choose a line voltage wall thermostat or BTF unit-mount thermostat for temperature control
  • Multi-watt unit, choose between 2500 or 2000-Watt when installed at 240-Volt; choose between 1875 or 1500-Watt when installed at 208-Volt
  • Convection heating helps circulate air to heat a space up to 350 sq. ft.
  • Timeless and proven fin construction maximizes surface area to funnel heated air and aid convection of air flow
  • Contemporary baseboard design is built to industry standard lengths to easily replace your current baseboard or match any new construction footprint
  • A high-temperature safety device switches heater off if normal operating temperatures are exceeded
  • Powder coating provides a smooth finish resistant to corrosion, scratches, fading, and wear
  • Steel-sheathed element offers excellent heat transfer and high quality durability
  • Pre-punched case at 1 in. intervals and accessible front caps provide easy installation of heater
  • Universal wiring allows you to install at either end of baseboard
  • Quiet operation makes it perfect for any area in the home, especially bedrooms
  • UL listed for safety
  • Lifetime warranty
  • White color
  • Match your heater to the voltage at connection: confirm if you have a 120-Volt or 240-Volt power supply before purchase; you can check your breaker, use a voltmeter, or look at the voltage on your old heater's label if replacing
  • Make sure you choose the right Electric Baseboard Heater for your space


Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Compare Similar

Price
$54.98 /each
$87.86 /each
$179.00 /each
$183.33 /each
Name 72 in. 1,500-Watt 240-Volt Electric Baseboard Heater in White 96 in. 2,000/2,500-Watt 240-Volt Electric Baseboard Heater in White SoftHeat 59 in. 1,000-Watt 240-Volt Hydronic Electric Baseboard Heater Left Hand Wire White SoftHeat 59 in. 1,000-Watt 240-Volt Hydronic Electric Baseboard Heater Right Hand Wire White
Brand Cadet Cadet Cadet Cadet
Ratings (55) (45) (28) (4)
Baseboard Heating Type Electric Electric Electric Electric
Voltage (volts) 240/208 240/208 240/208 240
Heating Technology Type Convection Convection Convection Convection
View Product View Product View Product View Product

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

28 Questions52 Answers

Customer Questions & Answers

96 in. 2,000/2,500-Watt 240-Volt Electric Baseboard Heater in White
96 in. 2,000/2,500-Watt 240-Volt Electric Baseboard Heater in White

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
4 answers

can this heater be mounted on carpet floor and panel wall ,do i need any space between wall and carpet floor

This question is from 96 in. 2,000/2,500-Watt 240-Volt Electric Baseboard Heater in White
Asked by
what56
green city mo
November 4, 2012
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Connecticut, USA
Read all my Q&A
March 12, 2014
Answer: 
Mine are.. No problems here, but check with your local building inspector.
-2points
1out of 4found this answer helpful.
Was this helpful?helpful1unhelpful3

Asked by
Minneapolis, MN, USA
Read all my Q&A
December 6, 2012
Answer: 
The install guide says it may be installed on carpet, however it says do not let carpet block the lower intake, which is 1" from bottom, so it would have to be some real thick carpet to cause a problem.
The guide doesn't say anything about paneled walls, but the casing doesn't get all that hot, I wouldn't worry about it, however you could contact the manufacturer for a definitive answer. Ultimately it Read More
The install guide says it may be installed on carpet, however it says do not let carpet block the lower intake, which is 1" from bottom, so it would have to be some real thick carpet to cause a problem.
The guide doesn't say anything about paneled walls, but the casing doesn't get all that hot, I wouldn't worry about it, however you could contact the manufacturer for a definitive answer. Ultimately it might depend on the temperature rating of the paneling. Read Less
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Vancouver, WA
Read all my Q&A
November 5, 2012
Answer: 
Hello what56 in Missouri and thanks for your questions!
Yes, this heater can be mounted on a carpeted floor. Just make sure that the carpet pile isn't any higher than about 1" tall because you don't want to block the heater's cold air intake. And yes, it can be mounted on a paneled wall, as long as the paneling is made of wood, and not a medium or lower density fiberboard.
And you don't need any space
Read More
Hello what56 in Missouri and thanks for your questions!
Yes, this heater can be mounted on a carpeted floor. Just make sure that the carpet pile isn't any higher than about 1" tall because you don't want to block the heater's cold air intake. And yes, it can be mounted on a paneled wall, as long as the paneling is made of wood, and not a medium or lower density fiberboard.
And you don't need any space between the wall and the carpeted floor! Feel free to butt the heater right up to the wall. We've included a link to our installation video which should help to explain just a bit more information for you.
Good luck and thanks again for asking. As a manufacturer we always appreciate questions so keep on asking! Read Less
User submitted video
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0

Asked by
SteelToes
Chicago IL
November 5, 2012
Answer: 
Hello and thank you for your question.
According to the instructions this heater can sit on any floor surface, including carpet.This and additional information can be viewed by clicking on the "More Info" tab located on the initial product page or by clicking on the link bellow.
http://www.homedepot.com/catalog/pdfImages/7e/7ed24a24-7ecd-4fbd-aec6-5bc30ccb0f9e.pdf
Hope this helps,
George Read More
Hello and thank you for your question.
According to the instructions this heater can sit on any floor surface, including carpet.This and additional information can be viewed by clicking on the "More Info" tab located on the initial product page or by clicking on the link bellow.
http://www.homedepot.com/catalog/pdfImages/7e/7ed24a24-7ecd-4fbd-aec6-5bc30ccb0f9e.pdf
Hope this helps,
George How-to-Community. Read Less
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0
 
3 answers

How quiet is this heater

This question is from 96 in. 2,000/2,500-Watt 240-Volt Electric Baseboard Heater in White
Asked by
MA
Read all my Q&A
January 19, 2014
I recently purchase a different brand heater. It sounds like i have a power line in my living room,
from the loud humming sound it makes. So, is this brand quiet has what the info stated?.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Helena, OH 43435, USA
Read all my Q&A
April 8, 2014
Answer: 
yes very much so !
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Connecticut, USA
Read all my Q&A
March 12, 2014
Answer: 
Yes, very quiet a few cracks and pops upon start up and when heating but doesn't last long and not annoying at all!
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Vancouver, WA
Read all my Q&A
Home Improvement Profile: Professional
January 20, 2014
Answer: 
Hello Pintech200 and thanks for the question!
Any of the Cadet model baseboards should be virtually silent if operating correctly. A buzzing baseboard might indicate a defective element.
If you experience any problems with our product, know that this baseboard comes with a limited lifetime warranty on the element, and is 100% backed by tech support here in Vancouver, Washington, that will work toward
Read More
Hello Pintech200 and thanks for the question!
Any of the Cadet model baseboards should be virtually silent if operating correctly. A buzzing baseboard might indicate a defective element.
If you experience any problems with our product, know that this baseboard comes with a limited lifetime warranty on the element, and is 100% backed by tech support here in Vancouver, Washington, that will work toward your complete satisfaction. Thanks again for asking!
Read Less
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
 
3 answers

how many amps is the heater or how many should be on the breaker box

This question is from 96 in. 2,000/2,500-Watt 240-Volt Electric Baseboard Heater in White
Asked by
leroy
cincinnati
September 18, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Helena, OH 43435, USA
Read all my Q&A
April 8, 2014
Answer: 
you need a 30 amp breaker for this heater. If you do the math, it works out to about 26 amps, so 30 will cover it.
-17points
2out of 21found this answer helpful.
Was this helpful?helpful2unhelpful19

Asked by
Berry Creek, CA 95916, USA
Read all my Q&A
December 27, 2013
Answer: 
The product uses aproximately 11 amps. (2500Watts divided by 240 Volts equals 10.42 Amps). This means that you can use #14 wire and a 15 amp circuit breaker if the unit is on a circuit by itself. You could also use two 1500 Watt units hooked to one thermostat and one circuit breaker. This would use 12.5 amps.
+7points
7out of 7found this answer helpful.
Was this helpful?helpful7unhelpful0

Asked by
Vancouver, WA
Read all my Q&A
September 20, 2013
Answer: 
This heater runs at either 2500 watts or 2000 watts depending on how it is configured when it is wired. This equals 10.41 amps or 8.33 Amps respectively at 240 volts. You may use a 20 Amp double pole breaker or larger with this heater.
+8points
8out of 8found this answer helpful.
Was this helpful?helpful8unhelpful0
 
3 answers

How many of these heaters would be required to heat a 354 square foot room in a basement?

This question is from 96 in. 2,000/2,500-Watt 240-Volt Electric Baseboard Heater in White
Asked by
Jerold
Newman Lake, WA
January 6, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Connecticut, USA
Read all my Q&A
March 12, 2014
Answer: 
I have just over 350 sqft and I used two 8' 2500w cadet baseboard heaters - perfect!
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Berry Creek, CA 95916, USA
Read all my Q&A
December 27, 2013
Answer: 
1500 Watts is good for 180 square feet in a cold climate like Minisota.... If you use two 1500 Watt heaters hooked to one thermostat you are good for 360 square feet. Place these heaters on oposite sides of the room.if possible. (1500 Watts is equivalent to 5120 BTU).
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0

Asked by
Vancouver, WA
Read all my Q&A
January 8, 2013
Answer: 
There are many factors that determine how many watts you will need to heat a room or zone. As a general rule, if the house was built before 1980 or the basement does not have appropriate insulation, you will probably need two 8 foot baseboard heaters. If your home was built after 1980 and there is decent insulation in the basement, then you should be able to heat the room with two 6 foot baseboards. Two Read More
There are many factors that determine how many watts you will need to heat a room or zone. As a general rule, if the house was built before 1980 or the basement does not have appropriate insulation, you will probably need two 8 foot baseboard heaters. If your home was built after 1980 and there is decent insulation in the basement, then you should be able to heat the room with two 6 foot baseboards. Two 6 foot baseboards can be operated on a 20 Amp circuit breaker with 12/2 wire. Two 8 foot baseboards need a 30 Amp circuit breaker with 10/2 wire. Read Less
+3points
5out of 7found this answer helpful.
Was this helpful?helpful5unhelpful2
2 3 »
  • 2016-10-31 T01:31:12.986-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202502551, prod, sort_default
2 3 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 102ms
  • QUESTIONS, PRODUCT

Customer Reviews

96 in. 2,000/2,500-Watt 240-Volt Electric Baseboard Heater in White is rated 4.1 out of 5 by 45.
Rated 4 out of 5 by from I purchased this 8 foot unit along with 2 six footers and a 2 foot one. They work fine! The only ... I purchased this 8 foot unit along with 2 six footers and a 2 foot one. They work fine! The only complaint I have with all of them is the packaging. There is dings/dents on all of them. The boxes were all in good condition. So apparently the Cadet is the problem with its packaging. You really have no control over this if you order these online and have them shipped to your home and you happen to be at work. I recommended the product because the operate normally.
Date published: 2016-11-22
Rated 5 out of 5 by from Surpassed expectation The installation was straight forward and the heater functioned perfectly except the metal reacting to the heat sounded like a metronome. Cadet technical support recommended reducing the tension on the mounting screws. I backed off each screw a turn and a half and problem solved.
Date published: 2016-10-04
Rated 3 out of 5 by from I brought this to replace the one in my bedroom because the old one was there for 44 yrs and was ... I brought this to replace the one in my bedroom because the old one was there for 44 yrs and was very noisy. They said this was suppose to be very quiet. It's not as quiet as I thought it would be, should have spent more and gotten the hydro electric heater
Date published: 2016-11-27
Rated 1 out of 5 by from noisy, metal creaks on heating and cool down. noisy, metal creaks on heating and cool down.
Date published: 2016-11-16
Rated 3 out of 5 by from Good product, but came dented!! I have ordered this brand of baseboard heat about a dozen times. 4 times it came in dented!!! The dents were clearly from the factory, not shipping. But other than that I like the product. I think it's much better looking than the other brand Home Depot carries.
Date published: 2016-11-08
Rated 5 out of 5 by from Working Great! I replaced an existing baseboard heater that was 25 years old. This was fairly easy to install if you have some knowledge of electricity. Instructions were average to above average. Once installed this produced significant heat.
Date published: 2016-09-27
Rated 3 out of 5 by from Baseboard Damaged The product was damaged when I opened at home. Had a electrician waiting to install the baseboard but it was damaged now I have to pay him again to come back. Anything you could do for me?
Date published: 2016-09-13
Rated 5 out of 5 by from Seems to be well built and was easy to install by following the instructions. Seems to be well built and was easy to install by following the instructions.
Date published: 2016-10-25
  • y_2017, m_1, d_14, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_45
  • loc_, sid_202502551, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 56ms
  • REVIEWS, PRODUCT