Rated 4.8 out of 5 by 6
Rated 5.0 out of 5.0 by JGS Nice modern tool with a case and sockets
Haven't used it much yet but I was impressed at the easy of removing lawn mower blade bolt that I almost ruined after trying to take it off with a open end wrench. I like the case to protect the tool and hold the US sockets.
June 12, 2015
Rated 5.0 out of 5.0 by RayW Awesome Impact Wrench
I am an avid Do It Yourselfer who can do anything to a vehicle except rebuild an engine or transmission. This impact wrench removed lug nuts from a GMC Sonoma like one reviewer stated :"Like Butter". Also removed upper and lower ball joint nuts with ease. This tool has a lot of torque and is well worth the money. Be sure to follow the directions and lube the wrench at the top (have to remove an allen screw which was on pretty tight and took about an ounce of oil) and also lube the air inlet with about 4 drops of oil every use (daily) and it should last a very long time. Also, be sure to use an air compressor that is rated above 4.7 CFM at 90 psi. I used a DeWalt air compressor, model number D55146 and it worked great. There are three settings for forward direction. I am guessing that the middle speed is about 80-100 ft/lbs. Scared to use the third setting because this wrench is strong :-). There is one reverse speed. Highly recommend this impact wrench. Only time with tell on how dependability but it feels rock solid.
January 1, 2015
Rated 5.0 out of 5.0 by Tallteelee Not too bad
I use this as a mechanic in training to pull lug nuts off of vehicles. Got lots of compliments from the older mechanics on it. It pulls lug nuts off with little to no effort and it's light and small so you can get into tight spots if you need to free up larger nuts or bolts. As long as you got the right compressor it's got the strength. Now bare in mind this in no IR or high end impact gun so don't expect 200-300 dollar performance and you will not be disappointed.
August 22, 2014
Rated 4.0 out of 5.0 by ChefD1985 Great product at 1/2 the cost of ingersoll rand
I was very skeptical of the power it would have but was pleasantly surprise. Bought a set of husky and had zero luck removing rusted bolts on an old trailer. Since then the trailer has been refinished and pulls better than ever. Also have bought 55 lb torque CH air ratchet 3/8 in. Will say to the ney sayers, have proper setup. Running CH 30 gal 150 psi max with 100 ft 3/8 in line. Running tools at 105 psi to compensate for length of line run
March 25, 2014
Rated 5.0 out of 5.0 by CARBOT Very sturdy well made product for home mechanic
This product has the power which is perfect for the DIY home mechanic.
April 2, 2013
Rated 5.0 out of 5.0 by JeepWrencher Great Torque
This impact has a lot of torque and takes off some of the toughest nuts and bolts like butter.
March 21, 2012