Campbell Hausfeld 115 Volt 100-Amp MIG/Flux-WG216001AV at The Home Depot
Free shipping

Campbell Hausfeld

Model # WG216001AV

Internet # 202754695

115 Volt 100-Amp MIG/Flux

Campbell Hausfeld 115 Volt 100-Amp MIG/Flux

This item has been discontinued.
The Home Depot no longer carries this specific product.

$236.90 / each
Item cannot be shipped to the following state(s): AK,GU,HI,PR,VI


In Stock



Model # WG216001AV

Internet # 202754695

The WG2160 is an ideal MIG/Flux-core wire feed welder to have around the house. It has the ability to weld in the Flux-core or MIG setting. Four different heat settings allows the user to zero-in to the correct heat setting depending on the application The convenient power and versatile design make this MIG welder a must in anyone's garage

California residents: seeProposition 65 information

  • Easy to change polarity, mig ready, built-in gas liner and valve, quickly change from flux to mig
  • Independent drive deck transformer provides consistent wire speed for smoother welds
  • Perfect for projects and repairs, weld with flux-core wire (no gas required) or Mig wire (MIG wire and shielding gas required)
  • Thermal overload protection automatically shuts off to avoid overheating
  • infinite wire feed allows adjustment for smooth even weld bead
  • 4 heat settings adjusts output power to match metal thickness


Assembled Depth (in.)  175 in  Assembled Height (in.)  11.5 in 
Assembled Width (in.)  10 in  Engine Power  Electric (AC) 
Manufacturer Warranty  5 Year Limited Warranty  Maximum amperage output (amps)  100 
Minimum amperage output (amps)  30  Power Tool Product Type  Welding Supplies 
Product Width (in.)  11  Returnable  90-Day 
Torch included  Yes  Voltage (volts)  115 
Welder Type  MIG  Welding Supplies Product Type  Arc/Stick Welder 


Rated 4 out of 5 by 7 reviewers.
Rated 4 out of 5 by So far So Good I have used the welder to build a Wood Burning Stove out of a sheet of 14 Gauge Steel. The welder worked good for this thinner steel and was able to make really nice welds. It worked just as good as the more expensive Lincoln welders I've used. I've used this on thicker angle iron to make a welding table and I had no problem making nice strong welds. February 14, 2014
Rated 5 out of 5 by good welder I am a professional welder and this little cracker Jack welder is perfect for the home welder I highly recommend it November 6, 2012
Rated 5 out of 5 by This product great for the money I'm very happy with my welder. It's great for auto body repair repair and a good start for a beginner like myself. Can't ask for more. December 27, 2012
Rated 5 out of 5 by Easy to set up and use The set-up instructions were a little incomplete. There was a part left over after following the instructions. Not too difficult figuring out where it went. Once set up, it works well so far. A few youtube videos and I am learning. My first few welds failed, but it was because I was tenuous, using it more like a glue gun than a welder. Now that I've cranked the heat setting up to penetrate the thickness of the metal I'm working with the welds are much better October 8, 2013
Rated 4 out of 5 by Good so far I am a novice, learning to weld on my own. It seems pretty straight forward to use. So far I would recommend this welder for a simple combo flux/mig welder. Watched a youtube independent review that sold me on the product. April 23, 2013
2 >>


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

Orders for this item may be expedited for an additional fee.

Other Delivery Options:

Express and Expedited shipping options are also available. Estimated arrival times are available in checkout.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.