0024043320031
Discontinued

Capitol

Model # CT12Q

Internet # 203270267

1-qt. High Performance Ceramic Tile Adhesive and Mastic

This item has been discontinued.
The Home Depot no longer carries this specific product.

Frequently Bought Together

Product Overview

Capitol CERA CT012 High Performance Ceramic Tile Adhesive is designed for installation of ceramic, porcelain, slate and marble tiles. The formula is engineered to meet or exceed ANSI A136 Type I and type II specifications. The formula features strong. early, wet strength to resist slippage on vertical surfaces and is water resistant once fully cured. The high performance formula meets all requirements for the installation of ceramic tile on concrete, plywood, APA grade particle board, OSB, Terrazzo, hardwood floors, latex-Portland cement Backerboard, and gypsum-cement Backerboard. The latex based formula is designed for easy clean-up with soap and water

  • For the installation of ceramic, porcelain, slate and marble tile
  • Type I latex based formula resists slippage
  • Use over concrete, plywood, APA grade particle board, OSB, Terrazzo, hardwood floors, latex-Portland cement Backerboard, and gypsum-cement Backerboard
  • Allow to dry 24 to 72 hours before grouting, depending on substrate and tile being set
  • Adhesive odor during installation and no odor after drying
  • Covers 65 - 70 sq. ft. per gal. with a 1/8 x 1/8 saw tooth trowel
  • Covers 40 - 45 sq. ft. per gal. with a 3/16 x 5/32 V-Notch trowel
  • Covers 35 - 40 sq. ft. per gal. with a 1/4 x 1/4 square notch trowel
  • Water resistant when cured
  • Working time of 45 minutes
  • Latex based, non-flammable formulation

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Container size (qt.) 
Maximum coverage area (sq. ft.) 
17.5 
Product Width (in.) 

Details

Adhesive Type 
Ceramic 
Color Family 
Beige / Cream 
Color Family 
Beige 
Commercial / Residential 
Commercial / Residential 
Dry time (hours) 
24 
Floor/wall use 
Floor and wall 
Flooring Product Type 
Flooring Adhesive 
Indoor/Outdoor 
Indoor 
Latex based 
Yes 
Product Weight (lb.) 
2.02 lb 
Product type 
Adhesive 
Returnable 
90-Day 
Solvent free 
No 
Use with 
Tile 
Water based 
No 

Warranty / Certifications

Lifetime Warranty 
No 
Manufacturer Warranty 
To be free from manufacturing defects 

More Products With These Features

Search

Customer Questions & Answers

7 Questions9 Answers

Customer Questions & Answers

1-qt. High Performance Ceramic Tile Adhesive and Mastic
1-qt. High Performance Ceramic Tile Adhesive and Mastic

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
2 answers

Can it be used for shower tile?

This question is from 1-qt. High Performance Ceramic Tile Adhesive and Mastic
Asked by
Bellevue
Read all my Q&A
August 24, 2015
I am planning to fix loose shower tiles. Will this product help?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

August 26, 2015
Answer: 
Thank you for your inquiry.
We do not recommend the use of this adhesive in a shower.This product is not recommended in areas subjected to prolonged/constant water immersion.
If you have any further questions please call our Customer Service (866) 435-8665.
Thank you for your interest in our product.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

August 25, 2015
Answer: 
Yes, this product can be used.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
 
2 answers

Mosaic tile

This question is from 1-qt. High Performance Ceramic Tile Adhesive and Mastic
Asked by
new jersey
Read all my Q&A
August 24, 2015
Can this product be used outdoors vertically on mosaic tiles 8"x8" in New jersey
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

August 26, 2015
Answer: 
Thank you for your inquiry.
We do not recommend the use of this adhesive outdoors.
If you have any further questions please call our Customer Service (866) 435-8665.
Thank you for your interest in our product.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

August 24, 2015
Answer: 
Yes, this product can be used.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Can I put it against sheet rock?

This question is from 1-qt. High Performance Ceramic Tile Adhesive and Mastic
Asked by
Read all my Q&A
January 25, 2016
Can I install my tile using this straight up against sheet rock?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

January 26, 2016
Answer: 
Thank you for your inquiry.
Our recommended substrates: Concrete (well cured; on-, above- or below-grade), masonry, cement backer board, cement mortar beds, cured Portland cement plaster, gypsum wallboard, coated glass mat backer board, water resistant gypsum wallboard, existing ceramic or resilient tile, plastic laminate, and association grade (CANPLY/APA) exterior plywood. Plywood should not be used Read More
Thank you for your inquiry.
Our recommended substrates: Concrete (well cured; on-, above- or below-grade), masonry, cement backer board, cement mortar beds, cured Portland cement plaster, gypsum wallboard, coated glass mat backer board, water resistant gypsum wallboard, existing ceramic or resilient tile, plastic laminate, and association grade (CANPLY/APA) exterior plywood. Plywood should not be used for marble tile applications.
If you have any further questions please call our Customer Service (866) 435-8665.
Thank you for your interest in our product. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Will it stick to Formica

This question is from 1-qt. High Performance Ceramic Tile Adhesive and Mastic
Asked by
Read all my Q&A
November 29, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

December 1, 2015
Answer: 
Hello and thanks for the question. The Roberts High Performance Ceramic Tile Adhesive and Mastic is designed to bond porous and semi-porous ceramic tile and thin brick over fully cured concrete, cement backer board, cement mortar beds, cement plaster, cement block, gypsum wallboard and exterior grade plywood. I would recommend to remove the Formica as this product needs to be installed on a porous Read More
Hello and thanks for the question. The Roberts High Performance Ceramic Tile Adhesive and Mastic is designed to bond porous and semi-porous ceramic tile and thin brick over fully cured concrete, cement backer board, cement mortar beds, cement plaster, cement block, gypsum wallboard and exterior grade plywood. I would recommend to remove the Formica as this product needs to be installed on a porous surface. If you have any more questions, please contact us at 866-435-8665. Thanks. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-07-22 T16:04:40.356-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203270267, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 105ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.5 out of 5 by 2 reviewers.
Rated 4.0 out of 5.0 by It is holding up. I had installed almost all my tiles with the thin-set mortar you have to mix yourself and then ran out with only four tiles left. I didn't need another 50 pound bag of sand...or even 25 pound bag. So I decided to go for the small pre-mixed bucket of adhesive. I did have some concerns after reading some of the reviews. It seems you would be at the mercy of chance as to whether you would get a bucket that wasn't too old and dry. But, I figured I could always return them until I found one that was the right consistency. I lucked out and got a good mix on my first attempt. It has been a month and the four 12x12 tiles I installed are holding up well. The product itself is very easy to use; no mixing, no dust flying around. A small bucket is more expensive than a 25-pound bag of mortar, but if you aren't going to use the whole bag, it would be a waste of money anyway. Bottom line....if you have a very small project and get a fresh bucket of tile adhesive, this is a great product. For cost purposes, I wouldn't go this route if you have a big job to accomplish. June 7, 2014
Rated 5.0 out of 5.0 by Excellent value for the money. This was the only such product I could find for outdoor use in cold climate. Very satisfactory experience with it, at a very good price and free delivery to store. April 26, 2013
  • 2016-07-24 T20:25:58.453-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_2, tr_2
  • loc_en_US, sid_203270267, prod, sort_default
1-2 of 2
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 102ms
  • REVIEWS, PRODUCT