Model # DL1076

Internet #203565019

Century 3/4 HP Blower Motor
0786674018571

Century

3/4 HP Blower Motor

$9810 /box

Frequently Bought Together

Product Overview

AO Smith 3/4 HP 115 Volt 1PH direct drive three speed Indoor blower motor replaces many furnace and fan coil motors. This blower motor has versatile mounting for direct drive applications and has reversible rotation. Requires a 15MFD 370 Volt Capacitor (not included).

California residents: see   Proposition 65 information

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Will this motor be compatible with the WIRING as shown in the attd. picture?

Current motor is for a GE system but has brown wires going to capacitor and a yellow wire that's not shown on this motor.
Asked by: Jim
Jim: I could not see the schematic to determine if your motor is compatible with the 3/4HP Century motor. However, it does appear that you have a 3 speed motor. If your motor is a single phase 115VAC, 3/4 HP motor, and it is a 3 speed motor, the Century motor should work just fine in your application. You will need to check your schematic for compatibility. Be sure to replace your capacitor at the same time. Also, you will likely need a furnace blower wheel puller (not available from HD) to remove the blower wheel from the motor shaft. Keep in mind that the new Century motor will have more wires than your motor. The additional wires are for reversing the rotation if that should be necessary in your application.
Answered by: RG
Date published: 2017-06-19

can you match a trane motor num tuc1008948a0 or could be tuc100b948a0 to one of your furnance motors that i can use as a replacement for the trane mot

Asked by: jeanne
The TUC100B948a0 is a ECM variable speed furnace motor and is NOT compatible with the Century 3/4 HP 3 speed furnace motor.
Answered by: RG
Date published: 2016-05-11

Can I replace a motor in my LENNOX 80UHG4/5(X)-120? Thanks!

Can I replace a motor in my LENNOX 80UHG4/5(X)-120? Thanks!
Asked by: AG
You just need to be sure it is the same FRAME, RPMs and voltage.
Answered by: George
Date published: 2017-03-14

can this be replaced a 1/2 HP Motor for a gas furnace

can this be replaced a 1/2 HP Motor for a gas furnace
Asked by: Rod
No, this can not replace a 1/2 HP motor.
Answered by: CommunityAnswer
Date published: 2016-10-28
  • y_2017, m_6, d_24, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_19
  • loc_, sid_203565019, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 98ms
  • QUESTIONS, PRODUCT

Customer Reviews

3/4 HP Blower Motor is rated 4.8 out of 5 by 11.
Rated 5 out of 5 by from So far so good, installed the new motor and capacitor and everything is working as it's supposed ... So far so good, installed the new motor and capacitor and everything is working as it's supposed to. This was significantly less in cost and received great reviews, of which I too can now give it high marks. If this meets your spec requirements I would certainly recommend it along with the replacement capacitor.
Date published: 2017-05-16
Rated 5 out of 5 by from This is a good replacement for a 4 speed GE motor, the Frame is the same and works good. This is a good replacement for a 4 speed GE motor, the Frame is the same and works good.
Date published: 2017-03-14
Rated 5 out of 5 by from Great product!!! Installed and working great.... Great product!!! Installed and working great.
Date published: 2017-01-25
Rated 5 out of 5 by from Worked as Expected. Worked as Expected.
Date published: 2017-03-28
Rated 5 out of 5 by from Fast and correct... Fast and correct
Date published: 2017-05-08
Rated 5 out of 5 by from Good motor This motor was $125 less than the exact replacement motor from the OEM. It has been used a lot over the past few weeks. The insulation on the wires is noticeably thinner than on the 26 year old OEM motor, but otherwise it has performed as expected. Home Depot had free ship-to-store. That took about a week.
Date published: 2016-07-26
Rated 5 out of 5 by from Excellent HVAC Blower Fan Fantastic inexpensive drop in replacement for my blower fan (goes inside the squirrel cage). It would cost you about $400 to have a professional do this. It's a few color coded wires and a set screw!
Date published: 2016-08-30
Rated 5 out of 5 by from Great Furnace Motor at an Excellent Price A universal 3/4 HP, multi speed motor that will work in many HVAC applications. This motor will save the installer at least 50% (in $$)over the comparable OEM style motor. This motor can be installed by a DIYer provided he/she has the required tools, For example, the installer will likely need a HVAC fan puller. DIYer must be able to read a schematic in order to orient the wiring correctly.
Date published: 2016-04-26
  • y_2017, m_6, d_25, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_, sid_203565019, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 104ms
  • REVIEWS, PRODUCT