Model # 3/4 M 10

Internet #100354200

Store SKU #148520

Cerro 3/4 in. x 10 ft. Copper Type M Hard Temper Straight Pipe
0662386010679

Cerro

3/4 in. x 10 ft. Copper Type M Hard Temper Straight Pipe

  • Rated at maximum 701 psi at 150 degrees F
  • Hard temper ASTM-B88 copper is NSF and ANSI Standard 61 certified
  • Backed by a 1-year limited manufacturer warranty
$15.85 / each
If you buy 15 or more
$13.47 / each

Frequently Bought Together

Product Overview

Ideal for a variety of plumbing and heating purposes, the 3/4 in. x 10 ft. Copper Type M Hard Temper Straight Pipe is strong and durable. It not only meets industry standards, but is also NSF and ANSI Standard 61 certified.

  • Constructed of hard temper ASTM - B88 copper
  • For general plumbing and heating uses
  • Alloy C12200 (DHP) meets industry standards and is NSF and ANSI standard 61 certified
  • Meets or exceeds industry standards to deliver high quality flow products
  • Plumbing and mechanical codes govern what types of products may be used for applications; local codes should always be consulted for minimum requirements
  • Note: product may vary by store

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

can you use this in air conditioning line hook up

Asked by: boxxcarr
Yes
Answered by: websearcher
Date published: 2016-12-30

what types of pipes are recommended for gas heating

Asked by: help
Steel is the best for gas,especially in earthquake prone areas. It's better to have a threaded pipe than have a copper pipe that is soldered or compression fitted for a gas line.
Answered by: websearcher
Date published: 2016-12-31

Where is this copper pipe made?

Where is this copper pipe made?
Asked by: Jazzman
Made by Alaskan Copper, also imported from China and India
Answered by: websearcher
Date published: 2017-03-04

Is it safe to be burnt? I am trying to use it to make a heat exchanger for a fire place.

Is it safe to be burnt? I am trying to use it to make a heat exchanger for a fire place.
Asked by: ray
I don't think it's advisable, to make a heat ex-changer with copper pipes.
Answered by: websearcher
Date published: 2016-12-30
  • y_2017, m_3, d_24, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_, sid_100354200, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 20ms
  • QUESTIONS, PRODUCT

Customer Reviews

3/4 in. x 10 ft. Copper Type M Hard Temper Straight Pipe is rated 4.2 out of 5 by 6.
Rated 5 out of 5 by from Excellent product,especially the solder adhered well , I was very happy with the out come. Excellent product,especially the solder adhered well , I was very happy with the out come.
Date published: 2016-11-09
Rated 5 out of 5 by from Great stuff... Great stuff
Date published: 2017-02-07
Rated 1 out of 5 by from Chinese Garbage!! Do not waste your money. Made the mistake of buying a couple hundred feet of 3/4" for a large job. The pipe was obviously manufactured out of spec because it is too big for my fittings. And no, it's not the fittings. I have a large supply of fittings from several sources and none of them fit properly. My cutter is sharp and I tighten it slowly. I've had to use a dead blow hammer to drive many of the fittings onto the pipe. I've tried filing the cut end, even put one piece on my bench grinder to actually put a taper on the cut end....once the coupling got past the taper it froze up. I put up with this for a couple of days until I needed to use a slip coupling. I was able to get the coupling onto one pipe but was unable to slip it back over the other pipe...it was locked up so tight I had to cut it off and redo a larger section as a result. Done with this garbage pipe..it's going back to HD today. This Chinese garbage has cost me more in rework and lost time than I gained by buying low-cost cheap pipe. My suggestion to anyone buying pipe from HD: take a hand full of your fittings to the store and see if they fit before buying the pipe.
Date published: 2015-11-09
Rated 4 out of 5 by from Did the job Copper pipe for water system worked great. No damage due to improper storage (i.e. not dented.).
Date published: 2013-02-05
Rated 5 out of 5 by from As expected / Go Copper! Not rocket science - just copper pipe. Works perfectly, stored in standup bins which keeps damage to minimum. Very consistent over hundreds of pieces.
Date published: 2013-09-21
Rated 5 out of 5 by from Good Value The pipe is straight, meets manufacturer specs and well made.
Date published: 2015-02-10
  • y_2017, m_3, d_24, h_13
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_, sid_100354200, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 16ms
  • REVIEWS, PRODUCT